{"title":"KIDDE","description":null,"products":[{"product_id":"detektor-koure-kidde-10y29","title":"Smoke detector KIDDE 10Y29","description":"Optical detector (photoelectric) powered by a lithium battery (built-in, immutable), which guarantees power supply for 10 years.\u003cbr\/\u003eThe device has been designed in a small, compact and modern design with a HUSH function to temporarily silence the detector in case of a false alarm. The detector is designed for continuous monitoring of the air for the presence of smoke and fire, with the possibility to be located near the kitchen or bathroom.\u003cbr\/\u003e\u003cbr\/\u003eIn the event of a fire, an acoustic signal of 85 dB is automatically triggered, and the device also signals the alarm visually (by indicating the red LED). The fire detector is also equipped with a TEST button to check the correct functioning of the equipment.\u003cbr\/\u003e\u003cbr\/\u003ePressing the HUSH button will immediately deactivate the alarm for about 10 minutes, reduce the sensitivity of the circuits and turn off the acoustic alarm. After about 10 minutes of deactivation of the detector, the detector is automatically reset to the original fire hazard monitoring setting.\u003cbr\/\u003e\u003cbr\/\u003eAt the end of its service life (after 10 years), the device will automatically notify you when it needs to be replaced.\u003cbr\/\u003e\u003cbr\/\u003eThe fire detector is equipped with a special lock to prevent accidental disassembly of the appliance by children or third parties.\u003cbr\/\u003e\u003cbr\/\u003eBattery operation allows quick and easy installation and ensures proper operation of the detector for 10 years after activation. The battery is activated when the detector is first placed in the mounting bracket.\u003cbr\/\u003e\u003cbr\/\u003eApproval\u003cbr\/\u003e\u003cbr\/\u003eKidde 10Y29 uses advanced photoelectric (optical) imaging technology and is independently tested to meet all European standards. Of course there is both CE certificate and approval according to ČSN, EN 14604: 2005 and CPD. Designed for installation into new buildings according to Decree 23\/2008 Coll. Decree on technical conditions of fire protection of buildings.\u003cbr\/\u003e\u003cbr\/\u003eAt least one fire detector should be installed on each floor of the house, in front of each sleeping area or in the immediate vicinity of the bedrooms.\u003cbr\/\u003e\u003cbr\/\u003eFunctional fire detector provides immediate warning of smoke or fire in the house, doubling the chances of survival of all persons in the house.\u003cbr\/\u003e\u003cbr\/\u003eThere are many different types of fire detectors with different functions for their easy operation. Kidde recommends installing both ionizing and photoelectric detectors to ensure maximum detection of the various types of fire that may occur in your home.\u003cbr\/\u003e\u003cbr\/\u003eFire detection technology\u003cbr\/\u003eTraditionally, 3 types of sensors are used for home fire and smoke detectors:\u003cbr\/\u003e\u003cbr\/\u003eOPTICAL DETECTORS are more effective for detecting slow burning, which can cause several hours of smoldering before the flames burn.\u003cbr\/\u003e\u003cbr\/\u003eIONIZATION TYPES OF FIRE DETECTORS are generally more effective for detecting fast-burning fires that rapidly spread and absorb flammable materials.\u003cbr\/\u003e\u003cbr\/\u003eHEAT DETECTORS start when the room temperature reaches the set value (usually 56 ° C). These detectors are usually used in places where other types of detectors are not suitable.\u003cbr\/\u003e\u003cbr\/\u003eRecommended location of fire detector: near kitchen, living room, dining room, bedroom, hallway, boiler room, cellar, attic, attic, for rooms and high ceiling areas or wherever limited access to the detector is foreseen.\u003cbr\/\u003e\u003cbr\/\u003eTesting\u003cbr\/\u003e\u003cbr\/\u003eThe best way to test and maintain the fire detector sensor is through the Detectasmoke calibration gas test kit. Detectasmoke verifies that the photoelectric and ionisation fire and smoke detector circuits and systems are working reliably and actively looking for any sign of fire.\u003cbr\/\u003e\u003cbr\/\u003eFor more information, visit www.detectagas.eu or contact your Detectagas Authorized Reseller.\u003cbr\/\u003e\u003cbr\/\u003eAdvantages of the device\u003cbr\/\u003eSmall and compact\u003cbr\/\u003eKidde photoelectric (optical) technology for smoke detection\u003cbr\/\u003eBuilt-in lithium battery - no need to replace power batteries throughout the life of the device.\u003cbr\/\u003eLoud alarm signaling strength 85dB\u003cbr\/\u003eFunction Test\u003cbr\/\u003eHUSH function\u003cbr\/\u003eBattery powered for 10 years\u003cbr\/\u003eInstallation on a wall or ceiling\u003cbr\/\u003eEnd-of-life signaling\u003cbr\/\u003eLow operating costs, small size and weight\u003cbr\/\u003eSimple assembly and handling\u003cbr\/\u003eTimeless and modern design\u003cbr\/\u003e10 years warranty on the device, including the battery\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters of the product\u003cbr\/\u003eSensor Technology: Optical (photoelectric) sensing technology.\u003cbr\/\u003e\u003cbr\/\u003eNANOWAX cover insert protecting the electronics of the device against moisture.\u003cbr\/\u003e\u003cbr\/\u003ePower supply: 3V DC, one lithium battery (integrated).\u003cbr\/\u003e\u003cbr\/\u003eMounting method: Ceiling or wall mounting (screws included).\u003cbr\/\u003e\u003cbr\/\u003eSignaling\u003cbr\/\u003e\u003cbr\/\u003eFire: 85 dB acoustic alarm and optically (pulsed red LED).\u003cbr\/\u003e\u003cbr\/\u003eFunction Test: The function of control and maintenance of the device, after its pressing the control unit performs a test.\u003cbr\/\u003e\u003cbr\/\u003eHUSH function: Function for temporarily silencing the fire detector in case of a false alarm.\u003cbr\/\u003e\u003cbr\/\u003eEnd of life signaling: Acoustic and optical indication for 30 days before 10 years have elapsed since power on\u003cbr\/\u003e\u003cbr\/\u003eOperating temperature: 0 ° C to + 40 ° C\u003cbr\/\u003e\u003cbr\/\u003eOperating Humidity: Up to 93% RH\u003cbr\/\u003e\u003cbr\/\u003eDimensions: diameter 104 mm, height 42 mm (with mounting bracket)\u003cbr\/\u003e\u003cbr\/\u003eWeight with batteries: 0.20 kg\u003cbr\/\u003e\u003cbr\/\u003eApprovals: EN 14604: 2006P \/ EN 14604: 2005 \/ VDS Q\u003cbr\/\u003e\u003cbr\/\u003eStamps: CE 086-CPD-535595\u003cbr\/\u003e\u003cbr\/\u003eWarranty: 10 years (on device and battery)","brand":"KIDDE","offers":[{"title":"Default Title","offer_id":52553391079762,"sku":"08831353","price":659.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08831353_c2ee5b82-7542-438f-81c4-7d1b150b9f6f.png?v=1776146105"},{"product_id":"detektor-plynu-kidde-k5dco-oxid-uhelnaty","title":"Detector KIDDE K5DCO carbon monoxide","description":"An economical solution and a low purchase price with an electrochemical sensor and a 7-year warranty, this is the Kidde K5DCO carbon monoxide (CO) detector, which continuously monitors the presence of poisonous carbon monoxide in homes or establishments, thus providing protection against its deadly effects. In addition to the three control LED indicators, it also has an LCD display, which continuously displays measured CO values ??and other status information. The detector can be firmly installed on the wall or simply placed freely on a table, shelf or other horizontal surface for better convenience. It is an ideal security element and reliable protection against this silent killer not only for households, but also in rented accommodation or on holidays.\u003cbr\/\u003e\u003cbr\/\u003eThe approval corresponds to the latest ČSN -EN50291:2018 standards for home carbon monoxide detectors. The K5DCO CO toxic gas leak detector is equipped with a sensor with a 7-year warranty and a 10-year lifespan. Its operating time is thus much longer than that of most conventional CO alarms normally offered on our market.\u003cbr\/\u003e\u003cbr\/\u003eAfter 10 years of protection, the device announces the end of its useful life and conveys the information that it needs to be replaced. ,\u003cbr\/\u003e\u003cbr\/\u003eCarbon monoxide detector with LCD display - Model Kidde K5DCO\u003cbr\/\u003eKidde products from the CO detection category meet the latest and most demanding criteria of the ČSN -EN50291-1:2018 standard and it is no coincidence that they belong to the world's top safety products, which have been relied on by both the general public and professionals around the world for many years.\u003cbr\/\u003e\u003cbr\/\u003eThe carbon monoxide detector K5DCO with a display is equipped with a second generation electrochemical sensor, it guarantees the service life and operability of the device for up to 10 years. Battery powered with two AA alkaline batteries (included in the package) allows the detector to be installed in an optimal location in the interior space, providing constant protection against this silent killer.\u003cbr\/\u003e\u003cbr\/\u003eThe built-in LCD display shows the carbon monoxide concentration level from 0 to 999 ppm*. The device measures the lethal danger in the form of carbon monoxide (CO) in seconds. Exceeding the permitted CO level is signaled visually (by a red LED indicator) and acoustically (by a loud, pulsating 85dB sound alarm).\u003cbr\/\u003e\u003cbr\/\u003eKidde carbon monoxide detectors are equipped with two buttons:\u003cbr\/\u003e\u003cbr\/\u003eTEST \/ RESET, which is intended for testing and verifying the proper functioning of the device and its reset\u003cbr\/\u003eMAX.CONCENTRATION, which is used to display the highest measured CO level detected since the device memory was reset.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eSensor technology: Kidde electrochemical technology - patent, is among the most accurate technologies in the world.\u003cbr\/\u003eSensor lifetime: 10 years\u003cbr\/\u003eSource: DC; two 1.5V AA alkaline batteries (included)\u003cbr\/\u003eMounting method: On the wall (screws and dowels are included in the package) or freely on a flat surface.\u003cbr\/\u003eExceeding the permissible CO concentration: Acoustic alarm 85 dB (at a distance of 3 m; 3.0 - 3.5 KHz), optical indication (red LED) with information on the display about the detected concentration (the display shows the CO concentration in the range 0 - 999 ppm ).\u003cbr\/\u003eEnd-of-life notification: Acoustic alarm tone (double short beep every 60 seconds), optical indication (yellow LED flashes twice every 60 seconds) with \"End\" information on the detector display.\u003cbr\/\u003eFault indication: Acoustic alarm tone (continuous tone or short beep every 30 seconds), optical indication (yellow LED flashes every 30 seconds) with the information \"Err\" on the detector display.\u003cbr\/\u003eAlarm activation memory: The red LED flashes every 60 seconds if the device has detected a CO concentration of 100 ppm or higher in the last 14 days.\u003cbr\/\u003eTEST \/ RESET button: Used to operate and control the device. After pressing the button, the device performs a control test of the device's electronics. It simultaneously serves to reset the measured values ??in the device's memory or silence the alarm during an alarm.\u003cbr\/\u003eMAX.CONCENTRATION button: After pressing the button, the display shows the values ??of the highest measured CO level stored in the detector's memory in the range of 11 - 999 ppm\u003cbr\/\u003eDisplay: LCD display (displaying values ??in the range 0 - 999 ppm)\u003cbr\/\u003eOperating conditions:\u003cbr\/\u003eTemperature: -10 °C - +45 °C\u003cbr\/\u003eHumidity: up to 90% relative humidity (RH) non-condensing\u003cbr\/\u003eStorage conditions:\u003cbr\/\u003eTemperature: -20 °C - +60 °C\u003cbr\/\u003eHumidity: 5% - 95% RH - non-condensing\u003cbr\/\u003eDimensions: 127mm x 73mm x 39mm\u003cbr\/\u003eWeight: 0.168 kg\u003cbr\/\u003eApproval: ČSN - 50291-1:2018+AC:2021\u003cbr\/\u003eMarks: CE\u003cbr\/\u003eWarranty: 7 years (does not apply to power batteries)\u003cbr\/\u003e\u003cbr\/\u003ePackage Contents:\u003cbr\/\u003e\u003cbr\/\u003e1x carbon monoxide detector with LCD display - model Kidde K5DCO\u003cbr\/\u003e1x mounting bracket\u003cbr\/\u003e1x wall mounting kit\u003cbr\/\u003e2x alkaline batteries 1.5 V type AA\u003cbr\/\u003eManual","brand":"KIDDE","offers":[{"title":"Default Title","offer_id":53044046463314,"sku":"08831609","price":759.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08831609_33d455eb-f99c-42f2-b95e-8ba3813df143.png?v=1776148556"},{"product_id":"detektor-plynu-kidde-k7co-oxid-uhelnaty","title":"Detector KIDDE K7CO carbon monoxide","description":"The Kidde K7CO carbon monoxide (CO) detector continuously monitors the presence of poisonous carbon monoxide in homes or businesses, thus providing protection against its deadly effects. It has three control LED indicators through which it indicates status information.\u003cbr\/\u003e\u003cbr\/\u003eThe detector can be firmly installed on the wall or simply placed freely on a table, shelf or other horizontal surface for better convenience. It is an ideal security element and reliable protection against this silent killer not only for households, but also in rented accommodation, on holidays, when traveling in motorhomes, caravans, trailers or boats. The approval corresponds to the latest ČSN -EN50291:2018 standards for home carbon monoxide detectors.\u003cbr\/\u003e\u003cbr\/\u003eThe Kidde K7CO poisonous gas CO detector is equipped with an industrial sensor with a 10-year warranty and service life. Its operating time is thus 40% longer than that of most conventional CO alarms normally offered on our market.\u003cbr\/\u003e\u003cbr\/\u003eAfter 10 years of protection, the device announces the end of its useful life and conveys the information that it needs to be replaced.\u003cbr\/\u003e\u003cbr\/\u003eKidde products from the CO detection category meet the latest and most demanding criteria of the ČSN -EN50291-1:2018 standard and it is no coincidence that they belong to the world's top safety products, which have been relied on by both the general public and professionals around the world for many years.\u003cbr\/\u003eThe carbon monoxide detector K7CO is equipped with an electrochemical sensor of the second generation, it guarantees the service life and operability of the device for up to 10 years. Battery powered with two AA alkaline batteries (included in the package) allows the detector to be installed in an optimal location in the interior space, providing constant protection against this silent killer.\u003cbr\/\u003e\u003cbr\/\u003eCO detector with conformal NANOWAX layer protecting device electronics even in very humid environments. It is thus possible to place or install the device in, for example, bathrooms with gas boilers, boiler rooms and the like.\u003cbr\/\u003eThe device measures the lethal danger in the form of carbon monoxide (CO) in seconds. Exceeding the permitted CO level is signaled visually (by a red LED indicator) and acoustically (by a loud, pulsating 85dB sound alarm).\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eDimensions: 119mm x 72mm x 40mm\u003cbr\/\u003eWeight: 0.160 kg (with batteries)\u003cbr\/\u003eApproval: ČSN -EN50291-1:2018 and part 2 (caravans, caravans and boats)\u003cbr\/\u003eMarks: CE\u003cbr\/\u003e Warranty: 10 years (does not apply to power batteries)\u003cbr\/\u003eOperating conditions:\u003cbr\/\u003eTemperature: -10 °C - +45 °C\u003cbr\/\u003eHumidity: up to 90% relative humidity (RH) non-condensing\u003cbr\/\u003eStorage conditions:\u003cbr\/\u003eTemperature: -20 °C - +60 °C\u003cbr\/\u003eHumidity: 5% - 95% RH - non-condensing\u003cbr\/\u003e\u003cbr\/\u003ePackage Contents:\u003cbr\/\u003e\u003cbr\/\u003e1x carbon monoxide detector - model Kidde K7CO\u003cbr\/\u003e2x alkaline batteries 1.5 V type AA\u003cbr\/\u003e1x mounting bracket\u003cbr\/\u003e1x wall mounting kit\u003cbr\/\u003eManual","brand":"KIDDE","offers":[{"title":"Default Title","offer_id":53044046692690,"sku":"08831616","price":929.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08831616_0060f1af-3a41-4d91-a288-d0f2e5f80ee2.png?v=1776148561"},{"product_id":"detektor-plynu-kidde-k7dco-oxid-uhelnaty","title":"Detector KIDDE K7DCO carbon monoxide","description":"The Kidde K7DCO carbon monoxide (CO) detector continuously monitors the presence of poisonous carbon monoxide in homes or businesses, thus providing protection against its deadly effects. In addition to the three control LED indicators, it also has an LCD display, which continuously displays measured CO values ??and other status information. The detector can be firmly installed on the wall or simply placed freely on a table, shelf or other horizontal surface for better convenience. It is an ideal security element and reliable protection against this silent killer not only for households, but also in rented accommodation, on holidays, when traveling in motorhomes, caravans, trailers or boats. The approval corresponds to the latest ČSN -EN50291:2018 standards for home carbon monoxide detectors.\u003cbr\/\u003e\u003cbr\/\u003eThe Kidde K7DCO CO leak detector is equipped with an industrial sensor with a 10-year warranty. Its operating time is thus 40% longer than that of most conventional CO alarms normally offered on our market.\u003cbr\/\u003e\u003cbr\/\u003eAfter 10 years of protection, the device announces the end of its useful life and conveys the information that it needs to be replaced.\u003cbr\/\u003e\u003cbr\/\u003eKidde carbon monoxide detectors are equipped with two buttons:\u003cbr\/\u003e\u003cbr\/\u003eWeekly test \/ reset, which is intended to test and verify the correct operation of the device and its reset\u003cbr\/\u003eMax. concentrations that are used to display the highest measured CO level detected since the device's memory was reset.\u003cbr\/\u003e\u003cbr\/\u003eNewly, the device also offers a function that informs about the activation of the alarm in the last 14 days, thanks to which the user can make sure that even during his absence, no unwanted concentration of carbon monoxide was recorded by the detector.\u003cbr\/\u003eThe condition of the sensor, batteries and internal circuits is automatically monitored by a microprocessor-controlled security system. In the event of detection of a malfunction, any operational anomaly or low capacity of the power batteries, this condition will be signaled optically by means of a yellow LED indicator with the display of the corresponding information on the LCD display, accompanied by the appropriate alarm acoustic signal.\u003cbr\/\u003e\u003cbr\/\u003eIn addition, the Kidde K7DCO detector is equipped with a simulation test function to quickly check the correct response of the CO sensor to the test gas.\u003cbr\/\u003e\u003cbr\/\u003eThanks to the special design, it is not necessary to fix the device on the wall in the room, but it is also possible to freely place the detector on flat surfaces, such as a bedside table, a shelf, etc. apartments, but also in caravans, caravans and boats.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eDimensions: 119mm x 72mm x 40mm\u003cbr\/\u003eWeight with batteries: 0.168 kg\u003cbr\/\u003eApproval: ČSN -EN50291-1:2018 and part 2 (caravans, caravans and boats)\u003cbr\/\u003eMarks: CE\u003cbr\/\u003e\u003cbr\/\u003ePackage Contents:\u003cbr\/\u003e\u003cbr\/\u003e1x carbon monoxide detector with LCD display - model Kidde K7DCO\u003cbr\/\u003e1x mounting bracket\u003cbr\/\u003e1x wall mounting kit\u003cbr\/\u003e2x alkaline batteries 1.5 V type AA\u003cbr\/\u003eManual","brand":"KIDDE","offers":[{"title":"Default Title","offer_id":53044528578898,"sku":"08831608","price":1019.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08831608_b8942cc5-41dc-42e1-bd14-aa6b4be74f80.png?v=1776148555"}],"url":"https:\/\/tipa-production.myshopify.com\/en\/collections\/brand-kidde.oembed","provider":"TIPA","version":"1.0","type":"link"}