{"title":"LUMIAX","description":null,"products":[{"product_id":"solarni-regulator-mppt-lumiax-mt2075-12-24v-20a","title":"Solar controller MPPT Lumiax MT2075, 12-24V\/20A","description":"MPPT controller 20A for all available types of batteries with a system voltage of 12V or 24V and for PV panels with a max. output of 260W(12V) or 520W(24V) with a max. input voltage of 55V and a min. input voltage of 1V higher than the battery charging voltage . It is therefore also suitable for panels with a system voltage of 12V, which generate 16-18V at maximum load. Using an internal inverter, this controller adjusts the V-A characteristic of the current source-solar panel to be optimal for charging the battery. It can use the energy from the solar panels better than the PWM controller, which regulates charging only by pulse limiting the direct connection of the solar panel and the battery, where the pulse width is proportional to the state of the battery being charged. In other words, the MPPT controller can generate the ideal voltage and current for charging the battery from the higher voltage and lower current of the source. For example, it converts 18V and 5A to 14.5V\/6.2A. The conversion efficiency of the V-A characteristic is usually over 95%, so losses are minimal and the regulators can usually be adapted to different types of batteries so that charging is as optimal as possible.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters.\u003cbr\/\u003e\u003cbr\/\u003e- system voltage 12 V or 24 V, usable batteries: Pb AGM, Pb AGM GEL, Pb liquid, LiFePO4\u003cbr\/\u003e- max. power of PV panels: 260W (520W-24V) for maximum use of the controller. When using a more powerful panel, the full power will not be used, but the function of the regulator will be preserved without damage.\u003cbr\/\u003e- max. PV panel voltage: 55V (-20°C), 50V(+25°C)\u003cbr\/\u003e- min. PV panel voltage when using a 12 V battery: 15.6 V - verified by own measurement\u003cbr\/\u003e- max. charging current: 20 A\u003cbr\/\u003e- own consumption: \u003c8mA(12V),\u003c12mA(24V)\u003cbr\/\u003e- 4 stage charging - only for Pb batteries (CC, CV – boost, CV – float, CV-equalize)\u003cbr\/\u003e- CC = charging with the full power of the PV panels up to the set value of the end of charging (CV-boost)\u003cbr\/\u003e- CV-boost = charging for 1-2 hours after reaching a terminal voltage of 14-15 V (adjustable)\u003cbr\/\u003e- CV-equalize = charging with increased voltage to mix the liquid electrolyte - optional only for lead-acid batteries with liquid electrolyte\u003cbr\/\u003e- CV-float = charging with a maintenance voltage of 13.5-13.8V (adjustable)\u003cbr\/\u003e- choice of battery type: With liquid dielectric, AGM, AGM GEL, LiFePO4\u003cbr\/\u003e- LCD display for setting and monitoring operating parameters\u003cbr\/\u003e- temperature compensation: –4.17mV\/K per cell when charging boost+equal  -3.33mV\/K per cell when charging float (sustaining)\u003cbr\/\u003e- protection IP32\u003cbr\/\u003e- RS485 interface\u003cbr\/\u003e- operating temperature: –25°C~55°C\u003cbr\/\u003e- dimensions: 189 × 182 × 64 mm\u003cbr\/\u003e- weight: 1 kg","brand":"LUMIAX","offers":[{"title":"Default Title","offer_id":52541912744274,"sku":"04280241","price":1490.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04280241_9c709de7-5ffc-4613-bf37-6f07393a79eb.png?v=1776147159"},{"product_id":"solarni-regulator-mppt-lumiax-mt1050eu-12v-10a","title":"Solar controller MPPT Lumiax MT1050EU, 12V\/10A","description":"MPPT regulator 10A for lead-acid batteries with a system voltage of 12V and for PV panels with a max. output of 130W with a max. input voltage of 45V and a min. input voltage of 15.8V. It is primarily intended for panels with a system voltage of 12V, which generate 16-18V at maximum load.\u003cbr\/\u003e\u003cbr\/\u003eBrief description of MPPT controllers:\u003cbr\/\u003eMPPT controllers use an internal V-A converter to adjust the characteristics of the current source-solar panel so that it is optimal for charging the battery. They can therefore use the energy from the solar panels better than PWM controllers, which regulate charging only by pulse limiting the direct connection of the solar panel and the battery, when the pulse width is proportional to the state of the battery being charged. In other words, the MPPT controller can generate the ideal voltage and current for charging the battery from the higher voltage and lower current of the source. For example, it converts 18V\/5A to 14.5V\/6.2A. The conversion efficiency of the V-A characteristic is usually over 95%, so the losses are minimal and the regulators can usually be adapted to different types of batteries so that the charging is as optimal as possible.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- system voltage 12 V\u003cbr\/\u003e- max. output of PV panels: 130 W for maximum use of the controller. When using a more powerful panel, the full power will not be used, but the function of the regulator will be preserved without damage.\u003cbr\/\u003e- max. PV panel output voltage: 45 V\u003cbr\/\u003e- minimum PV panel output voltage: 15.8 V – verified by own measurement\u003cbr\/\u003e- max. charging current: 10 A\u003cbr\/\u003e- own consumption: 7 mA\u003cbr\/\u003e- 4-stage battery charging (CC, CV – boost, CV – float, CV-equalize)\u003cbr\/\u003e- CC = charging with the full power of the PV panels up to the set value of the end of charging (CV-boost)\u003cbr\/\u003e- CV-boost = charging for 1-2 hours after reaching a terminal voltage of 14-15 V (adjustable)\u003cbr\/\u003e- CV-equalize = charging with increased voltage to mix the liquid electrolyte - optional only for batteries with liquid electrolyte\u003cbr\/\u003e- CV-float = charging with a maintenance voltage of 13.5-13.8 V (adjustable)\u003cbr\/\u003e- choice of Pb battery type: With liquid dielectric, AGM, AGM GEL\u003cbr\/\u003e- not suitable for Li-Ion, LiFePO4 or Li-Pol batteries\u003cbr\/\u003e- load disconnection at battery voltage 10.8–11.8V – adjustable\u003cbr\/\u003e- LCD display for setting and monitoring operating parameters\u003cbr\/\u003e- 2x USB interface\u003cbr\/\u003e- temperature compensation: –4.17mV\/K per cell when charging boost+equal - 3.33mV\/K per cell when charging float (maintenance)\u003cbr\/\u003e- Modbus protocol based on RS-485 interface maximizing communication possibilities.\u003cbr\/\u003e- protection IP32\u003cbr\/\u003e- operating temperature: –25°C~55°C\u003cbr\/\u003e- dimensions: 189 x 96 x 53 mm\u003cbr\/\u003e- weight: 0.42 kg","brand":"LUMIAX","offers":[{"title":"Default Title","offer_id":52554608968018,"sku":"04280240","price":899.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04280240_3af0c499-21c5-4d39-833a-893eb986e15b.png?v=1776147156"},{"product_id":"solarni-regulator-mppt-lumiax-mt3075-12-24v-30a","title":"Solar controller MPPT Lumiax MT3075, 12-24V\/30A","description":"MPPT controller 30A for all available types of batteries with a system voltage of 12V or 24V and for PV panels with a max. output of 390W(12V) or 780W(24V) with a max. input voltage of 55V and a min. input voltage of 1V higher than the battery charging voltage . It is therefore also suitable for panels with a system voltage of 12V, which generate 16-18V at maximum load. Using an internal inverter, this controller adjusts the V-A characteristic of the current source-solar panel to be optimal for charging the battery. It can use the energy from the solar panels better than the PWM controller, which regulates charging only by pulse limiting the direct connection of the solar panel and the battery, where the pulse width is proportional to the state of the battery being charged. In other words, the MPPT controller can generate the ideal voltage and current for charging the battery from the higher voltage and lower current of the source. For example, it converts 18V and 5A to 14.5V\/6.2A. The conversion efficiency of the V-A characteristic is usually over 95%, so losses are minimal and the regulators can usually be adapted to different types of batteries so that charging is as optimal as possible.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- system voltage 12 V or 24 V, usable batteries: Pb AGM, Pb AGM GEL, Pb liquid.\u003cbr\/\u003e- note: G923A must be purchased for LiFePO4 batteries.\u003cbr\/\u003e- max. output of PV panels: 390W (780W-24V) for maximum use of the controller. When using a more powerful panel, the full power will not be used, but the function of the regulator will be preserved without damage.\u003cbr\/\u003e- max. PV panel voltage: 55V (-20°C), 50V(+25°C)\u003cbr\/\u003e- min. PV panel voltage when using a 12V battery: 15.6V – verified by own measurement\u003cbr\/\u003e- max. charging current: 30 A\u003cbr\/\u003e- own consumption: \u003c8mA(12V),\u003c12mA(24V)\u003cbr\/\u003e- 4 stage charging-only for Pb batteries (CC, CV – boost, CV – float, CV-equalize)\u003cbr\/\u003e- CC = charging with the full power of the PV panels up to the set value of the end of charging (CV-boost)\u003cbr\/\u003e- CV-boost = charging for 1-2 hours after reaching a terminal voltage of 14-15V (adjustable)\u003cbr\/\u003e- CV-equalize = charging with increased voltage to mix the liquid electrolyte - optional only for lead-acid batteries with liquid electrolyte\u003cbr\/\u003e- CV-float = charging with a maintenance voltage of 13.5-13.8V (adjustable)\u003cbr\/\u003e- choice of battery type: With liquid dielectric, AGM, AGM GEL, LiFePO4\u003cbr\/\u003e- LCD display for setting and monitoring operating parameters\u003cbr\/\u003e- temperature compensation: –4.17mV\/K per cell when charging boost+equal -3.33mV\/K per cell when charging float (sustaining)\u003cbr\/\u003e- protection IP32\u003cbr\/\u003e- RS485 interface\u003cbr\/\u003e- operating temperature: –25°C~55°C\u003cbr\/\u003e- dimensions: 189 × 182 × 64 mm\u003cbr\/\u003e- weight: 1.3 kg","brand":"LUMIAX","offers":[{"title":"Default Title","offer_id":52556543754578,"sku":"04280243","price":1650.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04280243_9e4dbd67-0dd7-4d71-8911-ef30975dc84c.png?v=1775538732"},{"product_id":"solarni-regulator-mppt-lumiax-mt4010-bt-12-24v-40a-bluetooth","title":"Solárny regulátor MPPT Lumiax MT4010-BT, 12-24V\/40A, bluetooth","description":"The MPPT regulator adjusts the V-A characteristic of the current source-solar panel with the help of an internal converter so that it is optimal for charging the battery. It can therefore use the energy from solar panels much better than the PWM controller, which regulates charging only by pulse limiting the direct connection of the solar panel and the battery, when the pulse width is proportional to the state of the battery being charged. In other words, the MPPT controller can generate the ideal voltage and current for charging the battery from the higher voltage and lower current of the source. For example, it generates approx. 15V and 10A from 30V and 5A. The conversion efficiency of the V-A characteristic is usually over 95%, so the losses are minimal and the regulators can usually be adapted to different types of batteries so that the charging is as optimal as possible.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- system voltage 12–24V, usable batteries: Pb AGM, Pb AGM GEL, Pb liquid, LiFePO4\u003cbr\/\u003e- max. power of PV panels: 520W (1040W-24V) for maximum use of the regulator. When using a more powerful panel, the full power will not be used, but the function of the fegulator will be preserved without damage.\u003cbr\/\u003e- max. PV panel voltage: 100V (-20°C), 90V (+25°C)\u003cbr\/\u003e- max. charging current: 40A\u003cbr\/\u003e- own consumption: \u003c8mA(12V),\u003c12mA(24V)\u003cbr\/\u003e- 4-stage Pb battery charging (CC, CV – boost, CV – float, CV-equalize)\u003cbr\/\u003e- CC = charging with full power of PV panels up to the set value of the end of charging (CV-boost)\u003cbr\/\u003e- CV-boost = charging for 1–2 hours after reaching a terminal voltage of 14–15V (adjustable)\u003cbr\/\u003e- CV-equalize = charging with increased voltage to mix the liquid electrolyte - optional only for batteries with liquid electrolyte\u003cbr\/\u003e- CV-float = charging with a maintenance voltage of 13.5–13.8V (adjustable)\u003cbr\/\u003e- choice of battery type: With liquid dielectric, AGM, AGM GEL, LiFePO4\u003cbr\/\u003e- LCD display for setting and monitoring operating parameters\u003cbr\/\u003e- temperature compensation: –4.17mV\/K per cell when charging boost+equal -3.33mV\/K per cell when charging float (maintenance)\u003cbr\/\u003e- protection IP32\u003cbr\/\u003e- RS485 interface\u003cbr\/\u003e- operating temperature: –25°C~55°C\u003cbr\/\u003e- dimensions: 189×255×69mm\/1.8kg\u003cbr\/\u003e\u003cbr\/\u003eNote: for correct pairing using bluetooth, the battery must be charged to at least 12.5V. Solar Life application (skywise).","brand":"LUMIAX","offers":[{"title":"Default Title","offer_id":52556544344402,"sku":"04280246","price":2700.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04280246_39ade125-2a80-4ccd-8fc8-924114b069c7.png?v=1776147173"},{"product_id":"solarni-regulator-mppt-lumiax-mt1550euli-12v-15a-pro-lithiove-baterie","title":"Solar controller MPPT Lumiax MT1550EULi, 12V\/15A for lithium batteries","description":"MPPT regulator 15A for LiFePO4 batteries with system voltage 12V and for PV panels with max. Power 200W with max. Input voltage 35V and min. Input voltage 15.8V. It is primarily intended for panels with a system voltage of 12V, which generate 16-18V at maximum load.\u003cbr\/\u003e\u003cbr\/\u003eBrief description of MPPT controllers:\u003cbr\/\u003eThe MPPT controllers use the internal V-A converter to adjust the characteristics of the current source-solar panel so that it is optimal for battery charging. Thus, they can use energy from solar panels better than PWM controllers, which regulate charging only by pulse limitation of direct connection of solar panel and battery, where the pulse width is proportional to the state of the charged battery. In other words, the MPPT controller can generate the ideal voltage and current to charge the battery from the higher voltage and lower current of the source. For example, 18V \/ 5A converts to 14.5V \/ 6.2A. The V-A conversion efficiency is usually over 95%, so losses are minimal and controllers can usually be adapted to different types of batteries so that charging is as optimal as possible.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- system voltage: 12V\u003cbr\/\u003e- for LiFePO4 batteries with a nominal voltage of 12.8V\u003cbr\/\u003e- max. power of PV panels: 200W for maximum use of the controller. When using a more powerful panel, the full power will not be used, but the function of the controller will remain without damage.\u003cbr\/\u003e- max. output voltage of the PV panel: 35V\u003cbr\/\u003e- minimum output voltage of the PV panel: 15.8V - verified by own measurement\u003cbr\/\u003e- max. charging current: 15A\u003cbr\/\u003e- own consumption: 7mA\u003cbr\/\u003e- 3-stage battery charging (CC, CV - boost, CV - float)\u003cbr\/\u003e- CC = charging at full power of the PV modules to the set end-of-charge value (CV-boost)\u003cbr\/\u003e- CV-boost = charging for 1-2 hours after reaching the terminal voltage of 15V\u003cbr\/\u003e- CV-float = charging with a holding voltage of 13.8V\u003cbr\/\u003e- not suitable for lead batteries\u003cbr\/\u003e- load disconnection at 11-12V battery voltage - adjustable\u003cbr\/\u003e- LCD display for setting and monitoring operating parameters\u003cbr\/\u003e- 2 × USB interface\u003cbr\/\u003e- temperature compensation: –4.17mV \/ K per cell when charging boost + equal -3.33mV \/ K per cell when charging float (maintenance)\u003cbr\/\u003e- Modbus protocol based on RS-485 interface maximizing communication possibilities.\u003cbr\/\u003e- IP32 protection\u003cbr\/\u003e- operating temperature: -25 ° C ~ 55 ° C\u003cbr\/\u003e- dimensions: 189 × 96 × 53mm \/ 0.42kg","brand":"LUMIAX","offers":[{"title":"Default Title","offer_id":52556547326290,"sku":"04280227","price":1240.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04280227_dbabb9c9-fc2a-40f7-8d4f-45cbe3958a65.png?v=1776147360"},{"product_id":"solarni-regulator-mppt-lumiax-mt1550eu-12v-15a","title":"Solar controller MPPT Lumiax MT1550EU, 12V\/15A","description":"MPPT regulator 15A for lead batteries with system voltage 12V and for PV panels with max. Output 200W with max. Input voltage 35V and min. Input voltage 15.8V. It is primarily intended for panels with a system voltage of 12V, which generate 16-18V at maximum load. This controller adjusts the characteristics of the current source-solar panel using the internal V-A converter so that it is optimal for charging the battery. It can therefore use energy from solar panels better than the PWM controller, which regulates charging only by pulse limitation of the direct connection of the solar panel and the battery, where the pulse width is proportional to the state of the charged battery. In other words, the MPPT controller can generate the ideal voltage and current to charge the battery from the higher voltage and lower current of the source. For example, 18V \/ 5A converts to 14.5V \/ 6.2A. The V-A conversion efficiency is usually over 95%, so losses are minimal and controllers can usually be adapted to different types of batteries so that charging is as optimal as possible.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- system voltage 12V\u003cbr\/\u003e- max. power of PV panels: 200W for maximum use of the controller. When using a more powerful panel, the full power will not be used, but the function of the controller will remain without damage.\u003cbr\/\u003e- max. output voltage of the PV panel: 35V\u003cbr\/\u003e- minimum output voltage of the PV panel: 15.8V - verified by own measurement\u003cbr\/\u003e- max. charging current: 15A\u003cbr\/\u003e- max. discharge current: 10A (only if the load is connected via a controller)\u003cbr\/\u003e- own consumption: 7mA\u003cbr\/\u003e- 4-stage battery charging (CC, CV - boost, CV - float, CV-equalize)\u003cbr\/\u003e- CC = charging at full power of the PV modules to the set end-of-charge value (CV-boost)\u003cbr\/\u003e- CV-boost = charging for 1-2 hours after reaching terminal voltage 14-15V (adjustable)\u003cbr\/\u003e- CV-equalize = increased voltage charging for liquid electrolyte mixing-optional only for liquid electrolyte batteries\u003cbr\/\u003e- CV-float = charging with maintenance voltage 13.5–13.8V (adjustable)\u003cbr\/\u003e- choice of Pb battery type: With liquid dielectric, AGM, AGM GEL\u003cbr\/\u003e- not suitable for Li-Ion, LiFePO4 or Li-Pol batteries\u003cbr\/\u003e- load disconnection at battery voltage 10.8–11.8V - adjustable\u003cbr\/\u003e- LCD display for setting and monitoring operating parameters\u003cbr\/\u003e- 2 × USB interface\u003cbr\/\u003e- Temperature compensation: -4.17mV \/ K per cell when charging boost + equal -3.33mV \/ K per cell when charging float (maintenance)\u003cbr\/\u003e- Modbus protocol based on RS-485 interface maximizing communication possibilities.\u003cbr\/\u003e- IP32 protection\u003cbr\/\u003e- operating temperature: -25 ° C ~ 55 ° C\u003cbr\/\u003e- dimensions: 189 × 96 × 53mm \/ 0.42kg","brand":"LUMIAX","offers":[{"title":"Default Title","offer_id":52556548407634,"sku":"04280228","price":990.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04280228_64ca0b83-d1b8-43db-8ebb-64dee418ff21.png?v=1776147361"},{"product_id":"solarni-regulator-mppt-lumiax-mt2075-bt-12-24v-20a-bluetooth","title":"Solar controller MPPT Lumiax MT2075-BT, 12-24V\/20A, bluetooth","description":"MPPT controller 20A for all available types of batteries with a system voltage of 12V or 24V and for PV panels with a max. output of 260W(12V) or 520W(24V) with a max. input voltage of 55V and a min. input voltage of 1V higher than the battery charging voltage . It is therefore also suitable for panels with a system voltage of 12V, which generate 16-18V at maximum load. Using an internal inverter, this controller adjusts the V-A characteristic of the current source-solar panel to be optimal for charging the battery. It can use the energy from the solar panels better than the PWM controller, which regulates charging only by pulse limiting the direct connection of the solar panel and the battery, where the pulse width is proportional to the state of the battery being charged. In other words, the MPPT controller can generate the ideal voltage and current for charging the battery from the higher voltage and lower current of the source. For example, it converts 18V and 5A to 14.5V\/6.2A. The conversion efficiency of the V-A characteristic is usually over 95%, so the losses are minimal and the regulators can usually be adapted to different types of batteries so that the charging is as optimal as possible.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- system voltage 12 V or 24 V, usable batteries: Pb AGM, Pb AGM GEL, Pb liquid, LiFePO4\u003cbr\/\u003e- max. power of PV panels: 260W (520W-24V) for maximum use of the controller. When using a more powerful panel, the full power will not be used, but the function of the regulator will be preserved without damage.\u003cbr\/\u003e- max. PV panel voltage: 55V (-20°C), 50V(+25°C)\u003cbr\/\u003e- min. PV panel voltage when using a 12V battery: 15.6V – verified by own measurement\u003cbr\/\u003e- max. charging current: 20A\u003cbr\/\u003e- own consumption: \u003c8mA(12V),\u003c12mA(24V)\u003cbr\/\u003e- 4 stage charging-only for Pb batteries (CC, CV – boost, CV – float, CV-equalize)\u003cbr\/\u003e- CC = charging with the full power of the PV panels up to the set value of the end of charging (CV-boost)\u003cbr\/\u003e- CV-boost = charging for 1-2 hours after reaching a terminal voltage of 14-15V (adjustable)\u003cbr\/\u003e- CV-equalize = charging with increased voltage to mix the liquid electrolyte - optional only for lead-acid batteries with liquid electrolyte\u003cbr\/\u003e- CV-float = charging with a maintenance voltage of 13.5-13.8V (adjustable)\u003cbr\/\u003e- choice of battery type: With liquid dielectric, AGM, AGM GEL, LiFePO4\u003cbr\/\u003e- LCD display for setting and monitoring operating parameters\u003cbr\/\u003e- temperature compensation: –4.17mV\/K per cell when charging boost+equal, –3.33mV\/K per cell when charging float (sustaining)\u003cbr\/\u003e- protection IP32\u003cbr\/\u003e- RS485 interface\u003cbr\/\u003e- operating temperature: –25°C~55°C\u003cbr\/\u003e- dimensions: 189 × 182 × 64 mm\u003cbr\/\u003e- weight: 1 kg","brand":"LUMIAX","offers":[{"title":"Default Title","offer_id":53044236026194,"sku":"04280242","price":1499.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04280242_6849482e-122a-46a9-a804-0faf7a2f147d.png?v=1776147160"},{"product_id":"solarni-regulator-mppt-lumiax-mt3075-bt-12-24v-30a-bluetooth","title":"Solar controller MPPT Lumiax MT3075-BT, 12-24V\/30A, bluetooth","description":"MPPT controller 30A for all available types of batteries with a system voltage of 12V or 24V and for PV panels with a max. output of 390W(12V) or 780W(24V) with a max. input voltage of 55V and a min. input voltage of 1V higher than the battery charging voltage . It is therefore also suitable for panels with a system voltage of 12V, which generate 16-18V at maximum load. Using an internal inverter, this controller adjusts the V-A characteristic of the current source-solar panel to be optimal for charging the battery. It can use the energy from the solar panels better than the PWM controller, which regulates charging only by pulse limiting the direct connection of the solar panel and the battery, where the pulse width is proportional to the state of the battery being charged. In other words, the MPPT controller can generate the ideal voltage and current for charging the battery from the higher voltage and lower current of the source. For example, it converts 18V and 5A to 14.5V\/6.2A. The conversion efficiency of the V-A characteristic is usually over 95%, so losses are minimal and the regulators can usually be adapted to different types of batteries so that charging is as optimal as possible.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- system voltage 12 V or 24 V, usable batteries: Pb AGM, Pb AGM GEL, Pb liquid, LiFePO4\u003cbr\/\u003e- max. output of PV panels: 390W (780W-24V) for maximum use of the controller. When using a more powerful panel, the full power will not be used, but the function of the regulator will be preserved without damage.\u003cbr\/\u003e- max. PV panel voltage: 55V (-20°C), 50V(+25°C)\u003cbr\/\u003e- min. PV panel voltage when using a 12V battery: 15.6V – verified by own measurement\u003cbr\/\u003e- max. charging current: 30A\u003cbr\/\u003e- own consumption: \u003c8mA(12V),\u003c12mA(24V)\u003cbr\/\u003e- 4 stage charging - only for Pb batteries (CC, CV – boost, CV – float, CV-equalize)\u003cbr\/\u003e- CC = charging with the full power of the PV panels up to the set value of the end of charging (CV-boost)\u003cbr\/\u003e- CV-boost = charging for 1-2 hours after reaching a terminal voltage of 14-15V (adjustable)\u003cbr\/\u003e- CV-equalize = charging with increased voltage to mix the liquid electrolyte - optional only for lead-acid batteries with liquid electrolyte\u003cbr\/\u003e- CV-float = charging with a maintenance voltage of 13.5-13.8V (adjustable)\u003cbr\/\u003e- choice of battery type: With liquid dielectric, AGM, AGM GEL, LiFePO4\u003cbr\/\u003e- LCD display for setting and monitoring operating parameters\u003cbr\/\u003e- temperature compensation: –4.17mV\/K per cell when charging boost+equal -3.33mV\/K per cell when charging float (maintenance)\u003cbr\/\u003e- protection IP32\u003cbr\/\u003e- RS485 interface\u003cbr\/\u003e- operating temperature: –25°C~55°C\u003cbr\/\u003e- dimensions: 189 × 182 × 64 mm\u003cbr\/\u003e- weight: 1.3 kg\u003cbr\/\u003e\u003cbr\/\u003eNote: for pairing using bluetooth, the battery must be charged to at least 12.5V. Solar Life (skywise) app.","brand":"LUMIAX","offers":[{"title":"Default Title","offer_id":53159135740242,"sku":"04280244","price":1850.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04280244_a067fcc7-b3ee-467f-9692-7d04633212a3.png?v=1776147172"},{"product_id":"solarni-regulator-mppt-lumiax-mc2010-12-24v-20a","title":"Solar controller MPPT Lumiax MC2010, 12-24V\/20A","description":"MPPT regulator 20A for all available types of batteries with system voltage 12V or 24V and for PV panels with max. power 260W(12V) or 520W(24V) with max. input voltage 100V and min. input voltage 1V higher than battery charging voltage. It is therefore also suitable for panels with a system voltage of 12V, which generate 16-18V at maximum load. This regulator uses an internal inverter to adjust the V-A characteristic of the current source-solar panel to be optimal for battery charging. It can utilize the energy from the solar panels better than a PWM controller that regulates charging only by pulse limiting the direct connection between the solar panel and the battery, where the pulse width is proportional to the state of the battery being charged. In other words, the MPPT controller can generate the ideal voltage and current for charging the battery from a higher voltage and lower current source. For example, 18V and 5A converts to 14.5V\/6.2A. The conversion efficiency of the V-A characteristic tends to be above 95%, so losses are minimal and the regulators can usually be adapted to different types of batteries to provide the most optimal charging.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eSystem voltage 12 or 24V , applicable batteries: Pb AGM, Pb AGM GEL, Pb liquid, LiFePO4\u003cbr\/\u003eMax. power of PV panels: 260W (520W-24V) for maximum use of the controller. When using more powerful panels, the full power will not be used, but the function of the controller will be maintained without damage.\u003cbr\/\u003eMax. PV panel voltage: 100V (-20°C), 50V(+25°C)\u003cbr\/\u003eMin PV panel voltage when using 12V battery: 15.0V\u003cbr\/\u003eMax. charging current: 20A\u003cbr\/\u003eSelf-consumption: \u003c8mA(12V),\u003c12mA(24V)\u003cbr\/\u003e4 stage charging-only for Pb batteries (CC, CV-boost, CV-float, CV-equalize)\u003cbr\/\u003eCC = charging with full power of PV panels until the set value of the end of charging (CV-boost)\u003cbr\/\u003eCV-boost = charging for 1-2 hours after reaching the clamp voltage of 14-15V (adjustable)\u003cbr\/\u003eCV-equalize = charge with increased voltage to mix liquid electrolyte - only selectable for lead acid batteries with liquid electrolyte\u003cbr\/\u003eCV-float = charge with a holding voltage of 13.0-14.5V (adjustable), preset 13.7V\u003cbr\/\u003eBattery type selection: liquid dielectric, AGM, AGM GEL, LiFePO4\u003cbr\/\u003eLCD display for setting and monitoring operating parameters\u003cbr\/\u003eTemperature compensation: -4.17mV\/K per cell during boost+equal charging\u003cbr\/\u003e-3.33mV\/K per cell during float charging\u003cbr\/\u003eIP32 protection\u003cbr\/\u003eRS485 interface\u003cbr\/\u003eOperating temperature: -25°C~55°C\u003cbr\/\u003eRozměry: 136,6x136,4x67mm\/0,9kg\u003cbr\/\u003e\u003cbr\/\u003eNotice\u003cbr\/\u003eA battery charge of at least 12.5V is required for Bluetooth pairing. SolarLifeBT app\u003cbr\/\u003e\u003cbr\/\u003eThe 12\/24 versions can be switched in the bluetooth interface using the Solarlife app. Turn on the controller on the 12V battery and connect via the app. In Battery param and Advanced settings, change the Rated voltage to 24V and select SEND then disconnect the controller and reconnect already at 24V. Then it should be OK. Alternatively you can change the Rated Voltage to AUTO again 12 or 24V will be detected automatically.","brand":"LUMIAX","offers":[{"title":"Default Title","offer_id":53620970488146,"sku":"04280501","price":1350.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04280501.jpg?v=1780344609"},{"product_id":"solarni-regulator-mppt-lumiax-mc2010bt-12-24v-20a-bluetooth","title":"Solar controller MPPT Lumiax MC2010BT, 12-24V\/20A, bluetooth","description":"MPPT regulator 20A for all available types of batteries with system voltage 12V or 24V and for PV panels with max. power 260W(12V) or 520W(24V) with max. input voltage 100V and min. input voltage 1V higher than battery charging voltage. It is therefore also suitable for panels with a system voltage of 12V, which generate 16-18V at maximum load. This regulator uses an internal inverter to adjust the V-A characteristic of the current source-solar panel to be optimal for battery charging. It can harness the energy from the solar panels better than a PWM controller that regulates charging only by pulse limiting the direct connection between the solar panel and the battery, where the pulse width is proportional to the state of the battery being charged. In other words, the MPPT controller can generate the ideal voltage and current for charging the battery from a higher voltage and lower current source. For example, 18V and 5A converts to 14.5V\/6.2A. The conversion efficiency of the V-A characteristic tends to be above 95%, so losses are minimal and the regulators can usually be adapted to different types of batteries to provide the most optimal charging. The integrated Bluetooth module (Solarlife app) can monitor operating status and parameters in real time.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eSystem voltage 12 or 24V , applicable batteries: Pb AGM, Pb AGM GEL, Pb liquid, LiFePO4\u003cbr\/\u003eMax PV panel power: 260W (520W-24V) for maximum controller utilization. When using more powerful panels, the full power will not be used, but the function of the controller will be preserved without damage.\u003cbr\/\u003eMax PV panel voltage: 100V (-20°C), 90V(+25°C)\u003cbr\/\u003eMin PV panel voltage when using a 12V battery: 15.0V\u003cbr\/\u003eMax. charging current: 20A\u003cbr\/\u003eMax.load current: 20A\u003cbr\/\u003eSelf-consumption: \u003c8mA(12V),\u003c12mA(24V)\u003cbr\/\u003e4 stage charging-only for Pb batteries (CC, CV-boost, CV-float, CV-equalize)\u003cbr\/\u003eCC = charging with full power of PV panels until the set value of the end of charging (CV-boost)\u003cbr\/\u003eCV-boost = charging for 1-2 hours after reaching the clamp voltage of 14-15V (adjustable)\u003cbr\/\u003eCV-equalize = charge with increased voltage to mix liquid electrolyte - only selectable for lead acid batteries with liquid electrolyte\u003cbr\/\u003eCV-float = charge with a holding voltage of 13.0-14.5V (adjustable), preset 13.7V\u003cbr\/\u003eBattery type selection: liquid dielectric, AGM, AGM GEL, LiFePO4\u003cbr\/\u003eLCD display for setting and monitoring operating parameters\u003cbr\/\u003eTemperature compensation: -4.17mV\/K per cell during boost+equal charging\u003cbr\/\u003e-3.33mV\/K per cell during float charging\u003cbr\/\u003eIP32 protection\u003cbr\/\u003eRS485 interface\u003cbr\/\u003eOperating temperature: -25°C~55°C\u003cbr\/\u003eRozměry: 136,6x136,6x67mm\/0,9kgfe.\u003cbr\/\u003e\u003cbr\/\u003eTurn on the controller on 12V battery and connect through the app. In Battery param and Advanced settings, change Rated voltage to 24V and select SEND then disconnect the controller and reconnect to 24V. Then it should be OK. Alternatively you can change the Rated Voltage to AUTO again 12 or 24V will be detected automatically.","brand":"LUMIAX","offers":[{"title":"Default Title","offer_id":53620970553682,"sku":"04280502","price":1590.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04280502.jpg?v=1780344627"},{"product_id":"solarni-regulator-mppt-lumiax-mc4010-12-24v-40a","title":"Solar controller MPPT Lumiax MC4010, 12-24V\/40A","description":"MPPT regulator 40A for all available types of batteries with system voltage 12V or 24V and for PV panels with max. power 520W(12V) or 1040W(24V) with max. input voltage 100V and min. input voltage 1V higher than the battery charging voltage. It is therefore also suitable for panels with a system voltage of 12V, which generate 16-18V at maximum load. This regulator uses an internal inverter to adjust the V-A characteristic of the current source-solar panel to be optimal for battery charging. It can harness the energy from the solar panels better than a PWM controller that regulates charging only by pulse limiting the direct connection between the solar panel and the battery, where the pulse width is proportional to the state of the battery being charged. In other words, the MPPT controller can generate the ideal voltage and current for charging the battery from a higher voltage and lower current source. For example, 18V and 5A converts to 14.5V\/6.2A. The conversion efficiency of the V-A characteristic tends to be above 95%, so losses are minimal and the regulators can usually be adapted to different types of batteries to provide the most optimal charging.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eSystem voltage 12 or 24V , applicable batteries: Pb AGM, Pb AGM GEL, Pb liquid, LiFePO4\u003cbr\/\u003eMax. power of PV panels: 520W (1040W-24V) for maximum use of the controller. When using more powerful panels, the full power will not be used, but the function of the controller will be maintained without damage.\u003cbr\/\u003eMax. PV panel voltage: 100V (-20°C), 90V(+25°C)\u003cbr\/\u003eMin PV panel voltage when using 12V battery: 15.0V\u003cbr\/\u003eMax. charging current: 40A\u003cbr\/\u003eMax.load current: 30A\u003cbr\/\u003eSelf-consumption: \u003c8mA(12V),\u003c12mA(24V)\u003cbr\/\u003e4 stage charging-only for Pb batteries (CC,CV - boost, CV - float, CV-equalize)\u003cbr\/\u003eCC = charging with full power of PV panels until the set value of the end of charging (CV-boost)\u003cbr\/\u003eCV-boost = charging for 1-2hrs after reaching clamp voltage of 14-15V (adjustable)\u003cbr\/\u003eCV-equalize= charging with increased voltage to mix liquid electrolyte - only selectable for lead acid batteries with liquid electrolyte\u003cbr\/\u003eCV-float = charge with a holding voltage of 13.0-14.5V(adjustable), preset 13.7V\u003cbr\/\u003eBattery type selection: liquid dielectric, AGM, AGM GEL, LiFePO4\u003cbr\/\u003eLCD display for setting and monitoring operating parameters\u003cbr\/\u003eTemperature compensation: -4.17mV\/K charge during boost+equal charging\u003cbr\/\u003e-3.33mV\/K per cell during float charging\u003cbr\/\u003eIP32 protection\u003cbr\/\u003eRS485 interface\u003cbr\/\u003eOperating temperature: -25°C~55°C\u003cbr\/\u003eDimensions: 136.6x200x67mm\/1.45kg","brand":"LUMIAX","offers":[{"title":"Default Title","offer_id":53620970619218,"sku":"04280503","price":2100.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04280503.jpg?v=1780344645"},{"product_id":"solarni-regulator-mppt-lumiax-mc4010bt-12-24v-40a-bluetooth","title":"Solar controller MPPT Lumiax MC4010BT, 12-24V\/40A, bluetooth","description":"MPPT regulator 40A for all available types of batteries with system voltage 12V or 24V and for PV panels with max. power 520W(12V) or 1040W(24V) with max. input voltage 100V and min. input voltage 1V higher than the battery charging voltage. It is therefore also suitable for panels with a system voltage of 12V, which generate 16-18V at maximum load. This regulator uses an internal inverter to adjust the V-A characteristic of the current source-solar panel to be optimal for battery charging. It can harness the energy from the solar panels better than a PWM controller that regulates charging only by pulse limiting the direct connection between the solar panel and the battery, where the pulse width is proportional to the state of the battery being charged. In other words, the MPPT controller can generate the ideal voltage and current for charging the battery from a higher voltage and lower current source. For example, 18V and 5A converts to 14.5V\/6.2A. The conversion efficiency of the V-A characteristic tends to be above 95%, so losses are minimal and the regulators can usually be adapted to different types of batteries to provide the most optimal charging. The integrated Bluetooth module (Solarlife app) can monitor operating status and parameters in real time.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eSystem voltage 12 or 24V , applicable batteries: Pb AGM, Pb AGM GEL, Pb liquid, LiFePO4\u003cbr\/\u003eMaximum PV panel power: 520W (1040W-24V) for maximum controller utilization. When using more powerful panels, the full power will not be used, but the function of the controller will be maintained without damage.\u003cbr\/\u003eMax. PV panel voltage: 100V (-20°C), 90V(+25°C)\u003cbr\/\u003eMin PV panel voltage when using 12V battery: 15.0V\u003cbr\/\u003eMax. charging current: 40A\u003cbr\/\u003eMax.load current: 30A\u003cbr\/\u003eSelf-consumption: \u003c8mA(12V),\u003c12mA(24V)\u003cbr\/\u003e4 stage charging-only for Pb batteries (CC, CV-boost, CV-float, CV-equalize)\u003cbr\/\u003eCC = charging with full power of PV panels until the set value of the end of charging (CV-boost)\u003cbr\/\u003eCV-boost = charging for 1-2hrs after reaching clamp voltage of 14-15V (adjustable)\u003cbr\/\u003eCV-equalize= charging with increased voltage to mix liquid electrolyte-optional only for lead acid batteries with liquid electrolyte\u003cbr\/\u003eCV-float = charge with a holding voltage of 13.0-14.5V (adjustable), preset 13.7V\u003cbr\/\u003eBattery type selection: liquid dielectric, AGM, AGMGEL, LiFePO4\u003cbr\/\u003eLCD display for setting and monitoring operating parameters\u003cbr\/\u003eTemperature compensation: -4.17mV\/K per cell during boost+equal charging\u003cbr\/\u003e-3.33mV\/K per cell during float charging\u003cbr\/\u003eIP32 protection\u003cbr\/\u003eRS485 interface\u003cbr\/\u003eOperating temperature: -25°C~55°C\u003cbr\/\u003eDimensions: 136.6x200x67mm\/1.45kg","brand":"LUMIAX","offers":[{"title":"Default Title","offer_id":53620970684754,"sku":"04280504","price":2390.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04280504.jpg?v=1780344666"}],"url":"https:\/\/tipa-production.myshopify.com\/en\/collections\/brand-lumiax.oembed","provider":"TIPA","version":"1.0","type":"link"}