{"title":"SAFE","description":null,"products":[{"product_id":"detektor-plynu-safe-808com-oxid-uhelnaty","title":"Detector SAFE 808COM carbon monoxide","description":"This product is a smart detector with voice warning designed to indicate the release of carbon monoxide and all commonly found explosive gases in households (natural gas, methane, propane, butane) and in living spaces without significant danger.\u003cbr\/\u003e\u003cbr\/\u003eThe device is ideally suited for gas detection from all domestic gas appliances, gas boilers and indicates the leakage of flammable gas used for heating, cooking or heating.\u003cbr\/\u003e\u003cbr\/\u003eThe SAFE 808COM is equipped with two independent sensors that do not require additional calibrations or a TEST button to start a function that allows the device to verify the serviceability of the internal circuits using an automatic efficiency monitoring system.\u003cbr\/\u003e\u003cbr\/\u003eThe device stands out for its measurement stability, high sensitivity, long service life and compact dimensions.\u003cbr\/\u003e\u003cbr\/\u003eThe device is controlled by a microprocessor and signals the leakage of CO and gas both optically and acoustically via an 85 dB buzzer.\u003cbr\/\u003e\u003cbr\/\u003eIf the detector detects a danger, the device will start an acoustic buzzer signal accompanied by flashing of the red \"ALARM\" LED signal and a voice warning \"Please be careful, carbon monoxide leak!\" or \"Please be careful, gas leak!\".\u003cbr\/\u003e\u003cbr\/\u003eSimultaneously with this warning message, the detector display shows the current measured value.\u003cbr\/\u003e\u003cbr\/\u003eThis combined detector of CO, flammable and explosive gases protects you and your family from two dangerous threats at the same time.\u003cbr\/\u003e\u003cbr\/\u003eThe device is powered by a 230V \/ AC network with a backup NiMH 9V battery in case of power failure in the electrical network (battery is not included in the package).\u003cbr\/\u003e\u003cbr\/\u003eTest function\u003cbr\/\u003eThe device is equipped with a test function, which is used to artificially simulate the presence of CO or gas and allows verification of the operability of the internal circuits through an automatic efficiency monitoring system.\u003cbr\/\u003e\u003cbr\/\u003eLCD display\u003cbr\/\u003eIt shows not only the current values ??of CO and flammable gas, but also other additional information such as the capacity of the backup battery via a bar graph, network connection, etc. The backlit LCD display allows recognition and comparison of low and high values ??of potential danger.\u003cbr\/\u003e\u003cbr\/\u003eVoice warning function\u003cbr\/\u003eThe acoustic signal of the alarm siren is accompanied by a human voice (in the Czech language) informing about the detected danger \"Please be careful, carbon monoxide leak!\" or \"Please be careful, gas leak!\".\u003cbr\/\u003e\u003cbr\/\u003eWhere to install the detector\u003cbr\/\u003eWe install combined detectors of carbon monoxide, flammable and explosive gases in rooms with the potential occurrence of CO or gas leakage (bathrooms, gas boiler rooms, kitchens, rooms with wavki, karma, direct heaters, heaters, etc.).\u003cbr\/\u003e\u003cbr\/\u003eThe basic criterion for the correct placement of the detector is gas identification, i.e. whether we will detect light gas (rises up to the ceiling) or heavy gas (falls to the floor).\u003cbr\/\u003e\u003cbr\/\u003eWe will choose the installation location according to this criterion. We always install the gas detector on the wall, depending on the type of gas detected, either under the ceiling (approx. 15-30 cm) or above the floor (approx. 15-30 cm), at a distance of at least 1.2 m from the fuel-burning device to minimize false alarms, which they can occur during a short gas leak, for example when lighting a gas boiler or stove and at a distance of approx. 60 cm from the corners, i.e. the place where two walls meet.\u003cbr\/\u003e\u003cbr\/\u003eProperties of gases and their weight relative to air\u003cbr\/\u003ePropane Butane (LPG): Heavier than air, sinks to the floor.\u003cbr\/\u003eCarbon monoxide (CO), natural gas (LNG, CNG): Lighter than air, rises up to the ceiling.\u003cbr\/\u003ePetroleum: Heavier than air, sinks to the floor.\u003cbr\/\u003eEthylene: Lighter than air, rises up to the ceiling.\u003cbr\/\u003e\u003cbr\/\u003eWhat is carbon monoxide?\u003cbr\/\u003eCarbon monoxide is a colorless, tasteless and odorless gas that is produced when fossil fuels such as coal, oil, natural gas, LPG, coal and wood are burned improperly. It can also be produced by poorly maintained or malfunctioning fuel-burning domestic heating appliances such as: boilers, gas appliances, cookers, grills, clogged chimneys, ventilation systems or damaged flue pipes.\u003cbr\/\u003e\u003cbr\/\u003eCommon symptoms of CO poisoning include headaches, nausea, fatigue or muscle pain - but these can easily be confused with a diagnosis of the flu.\u003cbr\/\u003e\u003cbr\/\u003eWhat is natural gas?\u003cbr\/\u003eNatural gas is piped into your home. Unless you live in the country, you probably use natural gas. It is the predominant energy for heating homes. Natural gas is a fossil fuel containing almost exclusively methane. Methane is much lighter than air and rises upwards when it escapes.\u003cbr\/\u003e\u003cbr\/\u003eIf you are a natural gas user, we recommend installing this detection device about 30 cm from the ceiling to ensure that a gas leak is detected as quickly as possible.\u003cbr\/\u003e\u003cbr\/\u003eWhat is propane?\u003cbr\/\u003ePropane is most often delivered to the home in liquid form and is stored near the house in propane tanks. Propane is used in homes in rural areas where natural gas is not installed. As propane is the most commonly used LPG (liquefied petroleum gas), pan and LPG are often used interchangeably. Unlike natural gas, propane is much heavier than air and stays low to the ground. We therefore recommend installing this detection device low to the floor to ensure the fastest possible detection of a gas leak.\u003cbr\/\u003e\u003cbr\/\u003eIt is therefore important to protect your family and home with carbon monoxide and flammable gas detectors.\u003cbr\/\u003e\u003cbr\/\u003eDevice benefits\u003cbr\/\u003eA unique combination of two devices for the detection of carbon monoxide and flammable gases\u003cbr\/\u003eVoice warning - informs about detected danger in a human voice\u003cbr\/\u003eAdvanced catalytic combustion and electrochemical sensor technology in one device\u003cbr\/\u003eDisplay of the current CO and gas concentration on the LCD display\u003cbr\/\u003ePowered by AC 90V-240V mains\u003cbr\/\u003eBackup power supply with 9V NiMH rechargeable batteries in case of power failure\u003cbr\/\u003eIntelligent detection control using a microprocessor\u003cbr\/\u003eInformation and warning LED indication\u003cbr\/\u003eTest function, verifying the proper functioning of the device\u003cbr\/\u003eSelf-monitoring detection system with automatic signaling of sensor failure\u003cbr\/\u003eBacklit LCD display for displaying measured values\u003cbr\/\u003eLoud alarm signaling alarm 85dB\u003cbr\/\u003eInstallation on the wall\u003cbr\/\u003eLow battery and sensor failure signaling\u003cbr\/\u003eLow operating costs, small dimensions and weight\u003cbr\/\u003eSimple assembly and handling\u003cbr\/\u003eModern and elegant design\u003cbr\/\u003e\u003cbr\/\u003eThis combined detector of carbon monoxide and flammable gases has a certificate confirming compliance with the requirements of the Czech technical standard ČSN-EN 50291-1:2010, Electrical devices for the detection of carbon monoxide in residential buildings and ČSN-EN 50194-1:2009, Electrical devices for the detection of flammable gases in residential buildings. Compliance with the standard was confirmed by the independent research laboratory TCT (Testing Certification Technology).\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eCarbon monoxide (CO): Electrochemical CO sensor\u003cbr\/\u003eSensor sensitivity: Depending on ambient conditions (temperature, humidity) and sensor condition\u003cbr\/\u003edisplayed values ??may differ. The tolerances of the displayed values ??are as follows:\u003cbr\/\u003eAmbient: 27 °C +\/- 12 °C (80 °F +\/- 10 °F), atmospheric pressure +\/- 10%, 40% +\/- 3% relative humidity\u003cbr\/\u003eAlarm: 50ppm (60 - 90 minutes)\u003cbr\/\u003eFlammable gases: Catalytic combustion sensor\u003cbr\/\u003eSensor sensitivity: 2500ppm+\/ - 1500PPM (0.25% - 2% DMV\/LEL)\u003cbr\/\u003eAlarm: ? 2500ppm (0.25% DMV\/LEL)\u003cbr\/\u003eReaction time: Max. 20 s\u003cbr\/\u003eMains power supply: AC 230 V \/ 50-60 Hz\u003cbr\/\u003eInitialization time: 180 s\u003cbr\/\u003eBackup power: NiMH battery 9V (optional - battery not included)\u003cbr\/\u003eOperating time on backup battery: 2 h operating mode \/ 30 min alarm\u003cbr\/\u003eSignaling\u003cbr\/\u003eSound signaling: 85 dB \/ 0.3 m\u003cbr\/\u003eExceeding the permissible concentration: 85 dB acoustic alarm accompanied by a voice warning \"Please be careful, carbon monoxide leak!\" or \"Please be careful, gas leak!\" and a visual indication of the red LED indicator, information on the display about the detected concentration.\u003cbr\/\u003eLED signaling indication:\u003cbr\/\u003eAC power supply: the green LED indicator lights continuously\u003cbr\/\u003eAlarm: rapid flashing of the red LED\u003cbr\/\u003eMalfunction: the yellow LED indicator lights up permanently\u003cbr\/\u003eMounting method: On the wall (screws are included in the package)\u003cbr\/\u003eProtection: IP30\u003cbr\/\u003eWorking temperature: 0 °C to +50 °C\u003cbr\/\u003eWorking relative humidity: 10%-95%.\u003cbr\/\u003eStorage temperature: -10 °C to 50 °C\u003cbr\/\u003eDimensions: 112 x 73 x 42 mm\u003cbr\/\u003eLength of power cable: approx. 1.35 m\u003cbr\/\u003eApproval: EN 50194-1:2009 \/ EN50291-1:2010\u003cbr\/\u003eMarks: CE","brand":"SAFE","offers":[{"title":"Default Title","offer_id":52553391178066,"sku":"08831359","price":1399.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08831359.png?v=1776146106"},{"product_id":"detektor-koure-safe-10y30-rf","title":"SAFE 10Y30-RF smoke detector","description":"SAFE 10Y30-RF wireless smoke detector with dual-spectrum detection and dust-proof optical chamber. SIC technology allows temporary silencing of the alarm with an IR remote control. Works stand-alone or in a FireSafe system with the SAFE 50HUB-WRF central unit; connects via CONNECTED. Integrated lithium battery for over 10 years of operation and 10-year warranty on battery and device.\u003cbr\/\u003e\u003cbr\/\u003eWireless communication in FireSafe network\u003cbr\/\u003e \u003cbr\/\u003eThe detector includes an integrated RF module that allows two or more FireSafe detectors to be connected wirelessly to form an interconnected wireless network, thanks to the CONNECTED function. In this case, if one of the devices triggers an alarm, it will send out a radio signal and all other FireSafe units connected in the network will respond to the alarm.\u003cbr\/\u003e\u003cbr\/\u003eFireSafe with central control unit\u003cbr\/\u003e \u003cbr\/\u003eAn intelligent FireSafe SAFE 50HUB-WRF central control unit can be added to the wireless network. These units then allow convenient setup and control of the complex FireSafe system remotely via an intuitive free mobile app (for Android and iOS) for smartphones, tablets and more. The Hub monitors the activity of all connected FireSafe detectors and devices, and immediately notifies system users via push notifications if a hazard is detected.\u003cbr\/\u003e\u003cbr\/\u003eUnique dual-spectrum smoke chamber technology\u003cbr\/\u003e \u003cbr\/\u003eA dual-spectrum optical sensor with blue and infrared LED sources with different wavelengths has been integrated into the dust and insect resistant, smoke detection chamber. The design of the chamber with direct link to the AI SAFE microprocessor thus offers the most reliable detection method, which, combined with a prediction algorithm, allows the measurement of microparticle concentrations directly in the air and in real time. This unique technology can thus determine the size of volatile particles inside the optical chamber and respond only to the real threat of smoke, ignoring the similar composition of water vapour or other fumes.\u003cbr\/\u003eResponding only to real threats\u003cbr\/\u003e \u003cbr\/\u003eFor residential fire detection systems, the priority is to inform occupants in a timely manner of an impending real danger. The AI SAFE microprocessor was developed based on a detailed analysis of the combustion properties of materials and works with a prediction algorithm that compares data from a dual-spectrum optical sensor and filters out the potential for false alarms in real time. If the recorded data corresponds to liquid water vapour particles or other types of fumes the detector will not respond. However, if the dynamics of the data pattern matches the actual smoke particulate parameters of the fire the detector will immediately trigger a fire alarm.\u003cbr\/\u003e\u003cbr\/\u003eFire alarm signalling\u003cbr\/\u003e \u003cbr\/\u003eIf the smoke concentration reaches a set value during detection, the detector automatically triggers a loud 85 dB audible alarm signal accompanied by the flashing of a red LED to indicate a fire alarm. This is a targeted way of attracting the attention of building occupants to the fact that a fire has started in a part of the building by means of a high noise level and an intense LED signal. The purpose of a fire alarm is to immediately respond to an alarm event or to move people from the scene of an emergency to a safe zone.\u003cbr\/\u003e\u003cbr\/\u003eSIC technology and remote alarm silencing by IR remote control\u003cbr\/\u003e \u003cbr\/\u003eThe detector has a combination button with TEST and SILENCE function, which is designed both for testing and verifying the correct functioning of the device and for temporary silencing of the detector. If you know the cause of the fire alarm activation and need to silence the loud siren sound, there is no need to go to the detector itself to silence it using the button. SIC technology allows you to remotely silence the audible alarm by pressing any button on a standard IR remote control (most controls for home appliances such as TVs).\u003cbr\/\u003e\u003cbr\/\u003eWith IZOVAX protection even in rooms with high humidity\u003cbr\/\u003e \u003cbr\/\u003eThe detector's electronic components and circuit board are coated with an insulating and protective layer of IZOVAX nanoparticle paint and, thanks to the innovative technology of the dual-spectrum optical sensing chamber, which can distinguish smoke particles from water vapour, the device can be installed in very humid environments (near bathrooms, drying rooms, kitchens or utility rooms), unlike conventional fire detectors.\u003cbr\/\u003e \u003cbr\/\u003eGuaranteed operating performance for decades\u003cbr\/\u003e \u003cbr\/\u003eThe power supply is provided by an integrated 3 V lithium battery (built-in, non-replaceable), guaranteeing extremely long detector operation for more than 10 years. Battery operation allows for quick and easy installation and ensures proper operation of the smoke and fire detector for more than 10 years after activation. Activation of the power battery occurs after the detector is placed and secured in the mounting bracket. After 10 years of protection and with 30 days notice, the detector will notify you of the end of life and automatically alert you that it needs to be replaced. The extended 10-year warranty covers both the battery and the device itself.\u003cbr\/\u003e\u003cbr\/\u003eSpecifications:\u003cbr\/\u003e\u003cbr\/\u003eSensor type.\u003cbr\/\u003ePower: 3V CR123A lithium battery (non-replaceable)\u003cbr\/\u003eBattery life: 10 years\u003cbr\/\u003eFeatures\u003cbr\/\u003eAlarm Signaling:\u003cbr\/\u003eOptical - dual LED indicator\u003cbr\/\u003eAcoustic - 85 dB at a distance of 3 m\u003cbr\/\u003ePreset alarm value: 0.2 dB\/m to 0.3 dB\/m\u003cbr\/\u003eConsumption: Standby: ?15 uA\u003cbr\/\u003eDuring alarm: ?35 mA\u003cbr\/\u003eWireless transmission\u003cbr\/\u003eOperating frequency: 868 MHz\u003cbr\/\u003eMaximum number of connected devices: 24\u003cbr\/\u003eRadio range: Up to 1000 m (unobstructed)\u003cbr\/\u003eCompatibility: FireSafe SAFE50HUB-WRF Central Unit\u003cbr\/\u003eDetection area: When the height of the room is less than 8 m, the area protected by the device is 20 m2 - 40 m2\u003cbr\/\u003eOperating temperature: -10 °C to +55 °C (+14 °F to 131 °F)\u003cbr\/\u003eOperating Humidity: Up to 95% relative humidity without condensation\u003cbr\/\u003eStorage conditions: Temperature: -20 °C to +60 °C\u003cbr\/\u003eHumidity: 5% to 95% relative humidity without condensation\u003cbr\/\u003eDimensions: 81.5 mm diameter × 51.6 mm height (with mounting bracket)\u003cbr\/\u003eWeight (with battery): 110 g (0.24 lb)\u003cbr\/\u003eNumber of pieces per carton 40 pcs\u003cbr\/\u003eCertification: EN 14604:2005+AC: 2008\u003cbr\/\u003eDeclaration of conformity: CE\u003cbr\/\u003e\u003cbr\/\u003ePackage contents:\u003cbr\/\u003e\u003cbr\/\u003eSAFE 10Y30 - RF\u003cbr\/\u003eUser manual with set of information labels\u003cbr\/\u003eMounting bracket\u003cbr\/\u003eMounting material","brand":"SAFE","offers":[{"title":"Default Title","offer_id":52896014270802,"sku":"08831641","price":790.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08831641_31b98fbe-fe97-4ef5-8cab-ad2fd75ea5fc.png?v=1776149813"},{"product_id":"detektor-koure-safe-set-fire-basic-sada-3ks","title":"Smoke detector SAFE SET FIRE BASIC set 3pcs","description":"The FIRE BASIC set includes 1x central unit (SAFE50HUB-WRF) and 2 x fire detectors (SAFE10Y30-RF ). The set offers extended protection of the home against smoke and fire. The wirelessly linked detectors with a long battery life of up to 10 years and the central hub provide instant notification throughout the property. Easy to install without cables, expandable with additional detectors. Ideal for apartments and homes.\u003cbr\/\u003e\u003cbr\/\u003eWhat the kit includes\u003cbr\/\u003e1× SAFE 50HUB-WRF - central control unit\u003cbr\/\u003e2× SAFE 10Y30-RF - FireSafe wirelessly connectable fire detectors\u003cbr\/\u003e Mounting accessories and instructions for use (per product)\u003cbr\/\u003e\u003cbr\/\u003eWhy buy this kit\u003cbr\/\u003eComplete coverage of key zones: two detectors for your critical areas.\u003cbr\/\u003eImmediate notification: both the sirens and the central unit notify you in the event of an alarm - the alert is spread wirelessly to all connected devices.\u003cbr\/\u003eWireless installation with no construction work: mounting material included, easy pairing, done in minutes.\u003cbr\/\u003eLong life and reliability: detectors with built-in 10-year battery minimise maintenance.\u003cbr\/\u003eOne-stop overview: the SAFE 50HUB-WRF central hub simplifies testing, status indication and kit management.\u003cbr\/\u003eScalable solution: you can add additional compatible detectors in your home at any time.\u003cbr\/\u003e\u003cbr\/\u003eKey benefits\u003cbr\/\u003eSafety 24\/7: smoke and fire is detected in time to enable a quick response.\u003cbr\/\u003eLess worry: 10-year battery life for detectors and automatic self-diagnosis.\u003cbr\/\u003eLinked alerts: an alarm from one sensor activates the others - you hear it across the apartment\/house.\u003cbr\/\u003eEasy to install: no wires, suitable for rentals and finished interiors.\u003cbr\/\u003eClear overview: the central unit indicates the status and facilitates tests.\u003cbr\/\u003eUnobtrusive in design: clean white design fits into any interior\u003cbr\/\u003e\u003cbr\/\u003eSAFE 50HUB-WRF - Central control unit:\u003cbr\/\u003e\u003cbr\/\u003ePurpose: control and signalling element for wirelessly connected FireSafe detectors.\u003cbr\/\u003e\u003cbr\/\u003eFunction:\u003cbr\/\u003eReceives status and alarm information from interconnected detectors.\u003cbr\/\u003eClear visual\/acoustic indications for quick reference.\u003cbr\/\u003eEnables test and silence (alarm silence by mode).\u003cbr\/\u003eBenefit: know what is happening from one place - minimizes false uncertainties and speeds family response.\u003cbr\/\u003e\u003cbr\/\u003eSAFE 10Y30-RF - FireSafe Wirelessly Connected Fire Alarm:\u003cbr\/\u003e\u003cbr\/\u003eDetection: optical smoke detection with fast response to smoldering and developing fires.\u003cbr\/\u003eConnectivity: RF communication with hub and other compatible detectors - sounds everywhere in the event of an alarm.\u003cbr\/\u003ePower: built-in long-life battery (up to 10 years).\u003cbr\/\u003eIndication: bright LED\/siren, test button.\u003cbr\/\u003eUse: bedrooms, living rooms, corridors - places with smoke risk.\u003cbr\/\u003e\u003cbr\/\u003eHow it works together\u003cbr\/\u003eThe detectors are paired wirelessly with the central unit.\u003cbr\/\u003eWhen smoke is detected, the sensors trigger a local siren.\u003cbr\/\u003eThe information is transmitted wirelessly to the hub and other connected detectors - the warning is heard throughout the building.\u003cbr\/\u003eYou can see the status on the hub and can run a test or use the silence function depending on the situation.\u003cbr\/\u003e\u003cbr\/\u003eRecommendations for placement\u003cbr\/\u003eSmoke detector (10Y30-RF): ceiling in central zones (corridors, bedrooms, living area), away from corners and strong flow.\u003cbr\/\u003eHub (50HUB-WRF): easily accessible location with good RF accessibility to detectors.\u003cbr\/\u003eQuick installation\u003cbr\/\u003eInstall mounting sockets, attach detectors, insert\/activate (if with integrated battery, activation only).\u003cbr\/\u003ePair the detectors with the hub as per the instructions - a few buttons, done.\u003cbr\/\u003ePerform a test: check the acoustic notification and communication between devices.\u003cbr\/\u003e\u003cbr\/\u003eTechnical summary:\u003cbr\/\u003e\u003cbr\/\u003eCommunication: wireless RF between hub and detectors.\u003cbr\/\u003eSignalling: acoustic siren, LED indication, alarm transmission between units.\u003cbr\/\u003ePower supply for detectors: integrated long-life battery (up to 10 years).\u003cbr\/\u003eMaintenance: regular push-button tests, occasional vacuuming\/dusting of sensors.\u003cbr\/\u003eCompatibility: detectors from the FireSafe range with RF link function.\u003cbr\/\u003eRefer to product datasheets for specific limits (RF range, sound pressure level, exact dimensions).\u003cbr\/\u003e\u003cbr\/\u003eFor whom the kit is ideal\u003cbr\/\u003eApartments and single family homes looking for fast and affordable smoke and fire protection.\u003cbr\/\u003eRentals and holiday homes where simple installation without interference with wiring is important.\u003cbr\/\u003eHomes with children and the elderly where a linked alarm can significantly reduce response times.","brand":"SAFE","offers":[{"title":"Default Title","offer_id":52896014467410,"sku":"08831642","price":2639.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08831642_099606df-bcbc-46cd-941e-9a259a76d57b.png?v=1776149815"},{"product_id":"detektor-plynu-safe-set-fire-co-sada-3ks","title":"Gas detector SAFE SET FIRE \u0026 CO set 3pcs","description":"The FIRE \u0026 CO SET includes 1x central unit (SAFE50HUB-WRF) + 1x CO detector (SAFE10YDCO-RF) plus 1 x fire detector (SAFE10Y30-RF ). The set offers extended protection of the home against smoke and fire and CO poisoning. Wirelessly linked detectors with long battery life of up to 10 years and a central hub provide instant notification throughout the property.\u003cbr\/\u003e\u003cbr\/\u003eWhat the kit includes\u003cbr\/\u003e1× SAFE 50HUB-WRF - central control unit\u003cbr\/\u003e1× SAFE 10Y30-RF - FireSafe wirelessly connectable fire detector\u003cbr\/\u003e1× SAFE 10YDCO-RF - wirelessly connectable FireSafe carbon monoxide (CO) detector\u003cbr\/\u003e Mounting accessories and instructions for use (per product)\u003cbr\/\u003e\u003cbr\/\u003eWhy buy this kit\u003cbr\/\u003eComplete home protection: covers both smoke\/fire and carbon monoxide risks in one connected kit.\u003cbr\/\u003eImmediate notification: both the sirens and the central unit inform you in the event of an alarm - the notification is spread wirelessly to all connected devices.\u003cbr\/\u003eWireless installation without construction intervention: mounting material included, easy pairing, done in minutes.\u003cbr\/\u003eLong life and reliability: detectors with built-in 10-year battery minimise maintenance.\u003cbr\/\u003eOne-stop overview: the SAFE 50HUB-WRF central hub simplifies testing, status indication and kit management.\u003cbr\/\u003eScalable solution: you can add additional compatible detectors in your home at any time.\u003cbr\/\u003e\u003cbr\/\u003eKey benefits\u003cbr\/\u003e24\/7 safety: smoke and CO detected in time to enable a quick response.\u003cbr\/\u003eLess worry: 10-year battery life for detectors and automatic self-diagnosis.\u003cbr\/\u003eLinked alerts: an alarm from one sensor activates the others - you hear it across the apartment\/house.\u003cbr\/\u003eEasy to install: no wires, suitable for rentals and finished interiors.\u003cbr\/\u003eClear overview: the central unit indicates the status and facilitates tests.\u003cbr\/\u003eUnobtrusive in design: clean white design fits into any interior\u003cbr\/\u003e\u003cbr\/\u003eSAFE 50HUB-WRF - Central control unit:\u003cbr\/\u003e\u003cbr\/\u003ePurpose: control and signalling element for wirelessly connected FireSafe detectors.\u003cbr\/\u003e\u003cbr\/\u003eFunction:\u003cbr\/\u003eReceives status and alarm information from interconnected detectors.\u003cbr\/\u003eClear visual\/acoustic indications for quick reference.\u003cbr\/\u003eEnables test and silence (alarm silence by mode).\u003cbr\/\u003eBenefit: know what is happening from one place - minimizes false uncertainties and speeds family response.\u003cbr\/\u003e\u003cbr\/\u003eSAFE 10Y30-RF - FireSafe Wirelessly Connected Fire Alarm:\u003cbr\/\u003e\u003cbr\/\u003eDetection: optical smoke detection with fast response to smoldering and developing fires.\u003cbr\/\u003eConnectivity: RF communication with hub and other compatible detectors - sounds everywhere in the event of an alarm.\u003cbr\/\u003ePower: built-in long-life battery (up to 10 years).\u003cbr\/\u003eIndication: bright LED\/siren, test button.\u003cbr\/\u003eUse: bedrooms, living rooms, corridors - places with smoke risk.\u003cbr\/\u003e\u003cbr\/\u003eSAFE 10YDCO-RF - FireSafe wirelessly connectable carbon monoxide (CO) detector:\u003cbr\/\u003e\u003cbr\/\u003eDetection: high sensitivity CO sensor for early warning of colorless, odorless and poisonous gas.\u003cbr\/\u003eConnectivity: RF link to hub and other detectors - alarm is transmitted across the network.\u003cbr\/\u003ePower: long battery life (up to 10 years) for maintenance-free operation.\u003cbr\/\u003eIndication: audible and visual indication, test\/silence.\u003cbr\/\u003eUse: rooms with gas appliances, boiler rooms, rooms with fireplaces, garages.\u003cbr\/\u003e\u003cbr\/\u003eHow it works together\u003cbr\/\u003eThe detectors are paired wirelessly with the central unit.\u003cbr\/\u003eWhen smoke or CO is detected, the sensors trigger a local siren.\u003cbr\/\u003eThe information is transmitted wirelessly to the hub and other connected detectors - the warning is heard throughout the building.\u003cbr\/\u003eYou can see the status on the hub and can run a test or use the silence function depending on the situation.\u003cbr\/\u003e\u003cbr\/\u003eRecommendations for placement\u003cbr\/\u003eSmoke detector (10Y30-RF): ceiling in central zones (corridors, bedrooms, living area), away from corners and strong flow.\u003cbr\/\u003eCO detector (10YDCO-RF): at breathing level near potential sources of CO (boiler, fireplace, gas appliance), not directly in the bathroom or above the sink.\u003cbr\/\u003eHub (50HUB-WRF): easily accessible location with good RF accessibility to detectors.\u003cbr\/\u003e\u003cbr\/\u003eQuick installation\u003cbr\/\u003eInstall mounting sockets, attach detectors, insert\/activate (if with integrated battery, activation only).\u003cbr\/\u003ePair the detectors with the hub as per the instructions - a few buttons, done.\u003cbr\/\u003ePerform a test: check the acoustic notification and communication between devices.\u003cbr\/\u003e\u003cbr\/\u003eTechnical summary\u003cbr\/\u003eCommunication: wireless RF between hub and detectors.\u003cbr\/\u003eSignalling: acoustic siren, LED indication, alarm transmission between units.\u003cbr\/\u003ePower supply for detectors: integrated long-life battery (up to 10 years).\u003cbr\/\u003eMaintenance: regular push-button tests, occasional vacuuming\/dusting of sensors.\u003cbr\/\u003eCompatibility: detectors from the FireSafe range with RF link function.\u003cbr\/\u003eRefer to product datasheets for specific limits (RF range, sound pressure level, exact dimensions).\u003cbr\/\u003e\u003cbr\/\u003eFor whom the kit is ideal\u003cbr\/\u003eApartments and houses looking for complete, fast and affordable smoke and CO security.\u003cbr\/\u003eRentals and holiday homes where simple installation without interference with wiring is important.\u003cbr\/\u003eHomes with children and the elderly where a linked alarm can significantly reduce response times.","brand":"SAFE","offers":[{"title":"Default Title","offer_id":52896014565714,"sku":"08831643","price":3119.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08831643_142be45c-3d69-4954-afb0-6a7a7e36b4bc.png?v=1776149814"},{"product_id":"detektor-plynu-safe-10ydco-rf-oxid-uhelnaty","title":"SAFE 10YDCO-RF carbon monoxide gas detector","description":"Wireless carbon monoxide (CO) detector\u003cbr\/\u003eA new generation of wireless carbon monoxide detector with breakthrough detection using a second generation electrochemical sensor and a colour LCD display with environmental features, which can operate as part of a FireSafe fire alarm system with support for the Hub FireSafe central control unit or completely stand-alone. Power is provided by an integrated lithium battery (built-in, non-replaceable) guaranteeing extremely long operation of the device for more than 10 years and an extended 10-year warranty on both the battery and the device itself.\u003cbr\/\u003e\u003cbr\/\u003eWireless carbon monoxide detector with 10 years warranty\u003cbr\/\u003eA new generation of wireless carbon monoxide detector for continuous air monitoring for carbon monoxide with breakthrough CO detection powered by an integrated lithium battery (built-in, non-removable) guaranteeing extremely long operation of the device for more than 10 years and an extended 10-year warranty.\u003cbr\/\u003eThe SAFE 10YDCO - RF is a carbon monoxide detector that boasts a timeless compact design and combines the latest hardware and software technology applied to a functional smart detector design representing a new level of standard in residential fire safety.\u003cbr\/\u003e\u003cbr\/\u003eFireSafe wireless network communication\u003cbr\/\u003eThe detector includes an integrated RF module which, thanks to the CONNECTED function, allows two or more FireSafe detectors to be connected wirelessly to create an interconnected wireless network. In this case, if one of the devices triggers an alarm, it will send out a radio signal and all other FireSafe units connected in the network will respond to the alarm.\u003cbr\/\u003e\u003cbr\/\u003eFireSafe with central control unit\u003cbr\/\u003eAn intelligent Hub FireSafe central control unit can be added to the wireless network. These units then enable convenient setup and control of the complex FireSafe system remotely via an intuitive free mobile app (for Android and iOS) for smartphones, tablets and more. The Hub monitors the activity of all connected sensors and FireSAFE CONNECTED devices, and in the event that a hazard is detected, it immediately notifies the system user in the form of an alarm and alarm push notifications in the FireSAFE app.\u003cbr\/\u003e\u003cbr\/\u003eAlarm notification of potentially dangerous carbon monoxide levels\u003cbr\/\u003eIn the event that the CO concentration reaches a specified threshold during detection, the detector will trigger a loud 85 dB audible alarm signal accompanied by the flashing of a red LED to indicate a carbon monoxide alarm, with the current measured CO concentration displayed on the detector's blue backlit display. This is a targeted way of attracting the attention of building occupants by means of high noise levels and intense LED signalling that a potential hazard is present in some part of the building. The purpose of the CO alarm is then to immediately respond to the alarm event or to move people from the scene of the emergency to a safe zone.\u003cbr\/\u003eEnvironmental display functions\u003cbr\/\u003eThe backlit multi-function LCD display shows the current measured CO concentration in ppm in alarm mode, while in standby mode it alternately displays the current room temperature and humidity information in the monitored area, thus allowing you to react to dangerously low or high humidity or temperature environmental conditions. The temperature level display can be set based on preference in degrees Celsius (°C) or Fahrenheit (°F).\u003cbr\/\u003eIf the detector is part of a fire safety system with a Hub FireSafe intelligent central control unit, individual data (battery status, room temperature and humidity, CO alarm information) is also displayed in the free FireSafe mobile app of your mobile phone or device.\u003cbr\/\u003e\u003cbr\/\u003eThe unique design of the device with IZOVAX protection\u003cbr\/\u003eThe combination of battery power and detector housing design allow for installation by placing the device in an optimal position on a horizontal surface. This eliminates the need for fixed installation of the carbon monoxide detector on a wall, but allows it to be variably and freely placed (stood up) on horizontal surfaces such as shelves, bedside tables, windowsills or other staging areas. The detector's electronic components and circuit board are coated with an insulating and protective coating of IZOVAX nanoparticle paint to protect the device's electronics even in very humid environments. The device can thus be placed or installed, for example, in bathrooms with karma, gas boilers, boiler rooms, drying rooms, etc.\u003cbr\/\u003e\u003cbr\/\u003eMemory of the highest measured value\u003cbr\/\u003eThe SAFE 10YDCO - RF carbon monoxide detector has a memory function for the highest measured value. The memory records information about the highest measured CO concentration even in your absence. By pressing the combined TEST\/SUSPEND button, you can recall and display this information on the LCD display regarding the highest levels of measured values since the last memory reset.\u003cbr\/\u003e\u003cbr\/\u003eTemporary alarm silencing function\u003cbr\/\u003eIf the detector detects a threshold level of carbon monoxide concentration, it will trigger an alarm to activate the alarm. In the event of an unwanted audible alarm, the alarm can be temporarily silenced by pressing the TEST\/SUSPEND button or directly in the FireSafe app (when the detector is added to a wireless network that includes the Hub FireSafe intelligent central control unit) for up to 9 minutes. The temporary silencing mode is signalled by the device with a red LED indicator that flashes 4 times every 5 seconds at a regularly recurring interval without an accompanying buzzer sound. If the CO concentration subsequently falls below the predetermined values, the detector automatically switches to normal operation mode.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eSensor technology: electrochemical.\u003cbr\/\u003eMicroprocessor: AI SAFE with prediction algorithm\u003cbr\/\u003eAlarm silencing: Manually by pressing the TEST \/ SILENCE button\u003cbr\/\u003ePCB protection: Insulating and protective coating with IZOVAX nanoparticles\u003cbr\/\u003ePower supply and consumption\u003cbr\/\u003ePower supply: 3V DC, one lithium battery (integrated for more than 10 years of operation)\u003cbr\/\u003eSignalling. Acoustic (85 dB siren) and optical (red, green and yellow LED indicator)\u003cbr\/\u003eConsumption: Standby: ?15 uA\u003cbr\/\u003eIn alarm: ?35 mA\u003cbr\/\u003eWireless transmission\u003cbr\/\u003eOperating radio frequency: 868 MHz\u003cbr\/\u003eMaximum number of connected devices: 24 FireSafe units\u003cbr\/\u003eRadio range: Up to 1000 m in an open area\u003cbr\/\u003eInstallation\u003cbr\/\u003eMounting method: Wall or horizontal surface\u003cbr\/\u003eInstallation type: Indoor\u003cbr\/\u003eOperating conditions\u003cbr\/\u003eOperating temperature: -10 °C to +55 °C\u003cbr\/\u003eOperating humidity. Up to 95% relative humidity without condensation\u003cbr\/\u003eStorage conditions: Temperature: -20 °C to +60 °C\u003cbr\/\u003eHumidity: 5% to 95% relative humidity without condensation\u003cbr\/\u003eDimensions and weight\u003cbr\/\u003eDimensions: 133.5 mm × 63.5 mm × 28.9 mm\u003cbr\/\u003eWeight: 122 g\u003cbr\/\u003eCertification: EN 50291-1:2018 and EN 50291-1:2018\/AC:2021\u003cbr\/\u003eDeclaration of conformity: CE","brand":"SAFE","offers":[{"title":"Default Title","offer_id":52896014827858,"sku":"08831644","price":1329.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08831644_3361664c-9322-4d4b-a8f6-9112a05c64c3.png?v=1776149815"},{"product_id":"detektor-koure-safe-fire-guard","title":"SAFE Fire Guard smoke detector","description":"Wireless smoke detector\u003cbr\/\u003eA new generation of wireless fire detector with breakthrough dual-spectrum dust-resistant optical chamber detection and SIC technology for temporary alarm silencing via IR remote control. It can operate as part of a SAFE alarm system supported by the Hub SAFE central control unit or completely autonomously. Power for up to 36 months is provided by a replaceable, lithium battery. The detector stands out for its fast response to detect danger combined with high sensitivity, stable performance and maximum resistance to false alarms.\u003cbr\/\u003e\u003cbr\/\u003eSAFE Wireless Fire Detector\u003cbr\/\u003eThe Fire Guard detector reacts in real time to the presence of smoke from incipient fires. In the event of an alarm, it activates the loud built-in siren and sends an alarm signal to the central control panel. When multiple detectors are used within a single system, they can be interconnected. The device is powered by a single 3 V CR123A lithium battery for up to 3 years of operation. The Fire Guard is a smoke detector in a timeless compact design combining the latest hardware and software technologies applied to a functional smart detector design representing a new level of standard in residential fire safety.\u003cbr\/\u003e\u003cbr\/\u003eFire Guard part of the SAFE alarm system\u003cbr\/\u003eThe Fire Guard smoke detectors, together with the Hub SAFE central control unit, are able to form the most effective basis of a comprehensive fire safety system for a building.\u003cbr\/\u003e\u003cbr\/\u003eSimply connect all ProSAFE-compatible devices to the Hub and conveniently manage them via the intuitive interface of the free mobile app of the same name (for Android and iOS) on your smartphone. Have effective control over a potential threat, allowing you to react immediately at its onset. Monitor the status of each device in real time. Remotely configure and adjust the settings of your security system from anywhere. All the information and instant alerts in one app on your phone 24 hours a day, 7 days a week!\u003cbr\/\u003e\u003cbr\/\u003eSAFE Keeper wireless communication\u003cbr\/\u003eSAFE Keeper is a radio protocol developed for SAFE alarm system products. It operates at an operating frequency of 868.0-868.6 MHz and provides a communication range between system devices of up to a distance in excess of 2,000 m in an open area without interruption. It ensures uninterrupted interaction between the central unit and the alarm system devices. It is protected by AES128 encryption and a bi-directional communication mechanism, thus ensuring a high level of security of the transmitted data. SAFE Keeper guarantees uninterrupted interaction between the central unit and the individual devices, underlining the maximum and effective protection of the wireless security system.\u003cbr\/\u003e\u003cbr\/\u003eUnique dual-spectrum smoke chamber technology\u003cbr\/\u003eA dual-spectrum optical sensor with blue and infrared LED sources with different wavelengths has been integrated into the dust- and insect-proof, smoke detection chamber. The chamber design is directly interfaced to the AI SAFE microprocessor. It thus offers the most reliable detection method, which, combined with a prediction algorithm, allows the measurement of microparticle concentrations directly in the air and in real time. This unique technology can determine the size of volatile particles inside the optical chamber and respond only to the real threat of smoke, ignoring the similar composition of water vapour or other fumes.\u003cbr\/\u003eResponding only to real threats\u003cbr\/\u003eFor residential fire detection systems, the priority is to inform occupants in a timely manner of an impending real danger. The AI SAFE microprocessor was developed based on a detailed analysis of the combustion properties of materials and works with a prediction algorithm that compares data from a dual-spectrum optical sensor and filters out the potential for false alarms in real time. If the recorded data corresponds to liquid water vapour particles or other types of fumes, the detector will not respond. However, if the dynamic pattern of the data matches the actual smoke particulate parameters of the fire, the detector will immediately trigger a fire alarm.\u003cbr\/\u003e\u003cbr\/\u003eFire alarm signalling\u003cbr\/\u003eIf the smoke concentration reaches a set value during detection, Fire Guard will automatically trigger a loud 85 dB audible alarm signal accompanied by the flashing of a red LED to indicate a fire alarm signal. This is a targeted way of attracting the attention of building occupants by means of a high level of noise and an intense LED indication that a fire has started in some part of the building. The purpose of a fire alarm is to immediately respond to an alarm event or to move people from the scene of an emergency to a safe zone.\u003cbr\/\u003e\u003cbr\/\u003eSIC technology and remote alarm silencing by IR remote control\u003cbr\/\u003eThe detector has a combination button with TEST and SILENCE function, which is designed both for testing and verifying the correct functioning of the device and for temporary silencing of the detector. If you know the cause of the fire alarm activation and need to silence the loud siren sound, there is no need to go to the detector itself to silence it using the button. SIC technology allows you to remotely silence the audible alarm by pressing any button on a standard IR remote control (most controls for home appliances such as TVs).\u003cbr\/\u003e\u003cbr\/\u003eWith IZOVAX protection even in rooms with high humidity\u003cbr\/\u003eThe electronic components and circuit board of the Fire Guard smoke detector are coated with an insulating and protective layer of IZOVAX nanoparticle paint and, thanks to the innovative technology of the dual-spectrum optical sensing chamber, which can distinguish smoke particles from water vapour, the device can be installed even in very humid environments (near bathrooms, drying rooms, kitchens or technical rooms), unlike conventional fire detectors.\u003cbr\/\u003e\u003cbr\/\u003eFire man bodyguard\u003cbr\/\u003eThe power supply is provided by an integrated 3 V lithium battery (replaceable) offering an extremely long service life of up to 3 years. Battery operation allows for quick and easy installation. As soon as the battery capacity falls below the preset limit level, the detector will inform you in advance and will continue to function properly after battery replacement. After more than 10 years of protection and with a 30-day advance notice, the detector will notify you of the end of life and automatically alert you that it needs to be completely replaced.\u003cbr\/\u003e\u003cbr\/\u003eSpecifications:\u003cbr\/\u003e\u003cbr\/\u003eInterface\u003cbr\/\u003eIndication.\u003cbr\/\u003eStandby: Green LED flashes once per minute\u003cbr\/\u003eAlarm: Red LED flashes once per second\u003cbr\/\u003eFault: Red LED flashes twice per minute\u003cbr\/\u003eFunctions\u003cbr\/\u003eRemote Update: Yes (Cloud)\u003cbr\/\u003eTemperature Sensor: Yes\u003cbr\/\u003eSearch: Signal strength detection\u003cbr\/\u003eLow battery warning: Yes\u003cbr\/\u003eFalse Alarm Protection: Yes\u003cbr\/\u003eWireless transmission\u003cbr\/\u003eCarrier frequency: 868.3 MHz\u003cbr\/\u003eCommunication distance. Up to 1,000 m (3,280.84 ft) in the open\u003cbr\/\u003eCommunication type: Two-way\u003cbr\/\u003eEncryption mode: AES128\u003cbr\/\u003eFrequency hopping: Yes\u003cbr\/\u003eDetection parameters\u003cbr\/\u003eDetection type: Smoke, fault warning, low battery warning\u003cbr\/\u003eSensor: Photoelectric - dual spectrum\u003cbr\/\u003eSampling time: 9 s\u003cbr\/\u003eRoom height: ?8 m\u003cbr\/\u003eDetection area: 20 m2 - 40 m2\u003cbr\/\u003eAlarm: Acoustic: 85 dB - 95 dB at a distance of 3 m (9.84 ft)\u003cbr\/\u003eOptical: LED indicator\u003cbr\/\u003eMaximum number of connected units: 24\u003cbr\/\u003eSilencing function: Yes\u003cbr\/\u003eSilencing time: approx. 9 min\u003cbr\/\u003eInfrared silencing: Yes\u003cbr\/\u003eDetector response threshold: 0.2 dB\/m - 0.3 dB\/m\u003cbr\/\u003eGeneral\u003cbr\/\u003ePower supply: 1×3V CR123A lithium battery (replaceable)\u003cbr\/\u003ePower consumption: ?35 µA (operation) \/ ?35 mA (alarm)\u003cbr\/\u003eBattery life: 3 years\u003cbr\/\u003eOperating temperature: -10 °C to +55 °C (+14 °F to +131 °F) (indoors)\u003cbr\/\u003eOperating humidity: ?95% (RH non-condensing)\u003cbr\/\u003eProduct dimensions (L × W × H): o98 mm × 43.1 mm (o3.85\" × 1.70\")\u003cbr\/\u003ePackage dimensions\u003cbr\/\u003eInstallation: ceiling mounted\u003cbr\/\u003eHousing Material: PC + ABS\u003cbr\/\u003eColor: White\u003cbr\/\u003eCompatibility: SAFE Hub 2 Plus LTE\u003cbr\/\u003eCompliance\u003cbr\/\u003eCE\u003cbr\/\u003eTÜV\u003cbr\/\u003eEN 14604:2005+AC:2008\u003cbr\/\u003eEN 62479:2010\u003cbr\/\u003eEN 50130-4:2011+A1\u003cbr\/\u003eEN 301489-1 V 2.2.3:2019\u003cbr\/\u003e\u003cbr\/\u003ePackage contents:\u003cbr\/\u003e\u003cbr\/\u003eSAFE Fire Guard\u003cbr\/\u003eManual","brand":"SAFE","offers":[{"title":"Default Title","offer_id":52896014991698,"sku":"08831645","price":990.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08831645_5ab12fc9-fb2d-4af8-b3e4-b223ed8883d5.png?v=1776149816"},{"product_id":"detektor-plynu-safe-10ydco-pro-oxid-uhelnaty","title":"Detector SAFE 10YDCO-PRO carbon monoxide","description":"A new generation carbon monoxide detector with breakthrough CO detection and immediate response using a second generation electrochemical sensor that tests every second for the deadly danger of carbon monoxide and displays the current concentration level in the monitored space on a color LCD display.\u003cbr\/\u003e\u003cbr\/\u003ePower is provided by an integrated lithium battery (built-in, non-changeable) guaranteeing an extremely long operation of the device for more than 10 years and an extended 10-year warranty for both the battery and the device itself. The carbon monoxide (CO) detector SAFE 10YDCO - PRO represents a new level of standard in the field of residential fire safety.\u003cbr\/\u003eThe CO SAFE 10YDCO - PRO detector has a whole range of innovative features, including AI SAFE microprocessor technology for filtering false alarms and measuring gas concentration directly in the air and in real time.\u003cbr\/\u003e\u003cbr\/\u003eUnique second generation electrochemical sensor technology\u003cbr\/\u003eThe second generation electrochemical sensor with de-ionized water electrolyte does not contain ions that could affect measurement accuracy or cause unwanted side reactions. In this way, the SAFE 10YDCO – PRO detector sensor provides reliable and accurate data on the concentration of carbon monoxide in the monitored area and at the same time represents a device with stable performance and a long service life. The second generation sensor of the SAFE 10YDCO – PRO detector has been designed to detect the presence of CO immediately as soon as the gas enters the sensor chamber.\u003cbr\/\u003eThe construction of the chamber with a direct link to the AI ??SAFE microprocessor then offers the most reliable detection method with the possibility of recognizing false stimuli and, in combination with the prediction algorithm, enables the measurement of gas concentration directly in the air and in real time.\u003cbr\/\u003e\u003cbr\/\u003eOnly respond to real threats\u003cbr\/\u003eIn the case of fire detection systems in residential buildings, the priority is to inform people in time about the imminent real danger. The AI ??SAFE microprocessor was developed based on a detailed analysis of the properties of carbon monoxide and works with a prediction algorithm that analyzes the data in relation to the current CO level in the monitored space, compares the data from the electrochemical sensor and filters the potential possibility of false alarms in real time to ensure immediate a response to the impending danger in the form of this silent killer.\u003cbr\/\u003eAlarm signaling of potentially dangerous levels of carbon monoxide\u003cbr\/\u003eIn the event that the CO concentration reaches a certain set limit during detection, the detector will trigger a loud 85 dB acoustic alarm signal accompanied by a flashing red LED indicator to indicate a carbon monoxide alarm, while the current measured CO concentration will be displayed on the detector's blue backlit display.\u003cbr\/\u003e\u003cbr\/\u003eEnvironmental function of the display\u003cbr\/\u003eThe backlit multi-function LCD display in alarm mode displays the current measured CO concentration expressed in ppm units, while in standby mode it alternately displays the current room temperature and humidity information in the monitored space, thus enabling you to react to dangerously low or conversely high humidity or temperature conditions in the environment. Temperature level display can be set based on preference in Celsius (°C) or Fahrenheit (°F).\u003cbr\/\u003e\u003cbr\/\u003eUnique design of the device\u003cbr\/\u003eThe combination of battery power supply and the design of the detector housing allow installation by placing the device in an optimal position on a horizontal surface. Thanks to this, a fixed installation of the carbon monoxide detector on the wall is not required, but it can be variably and freely placed (built) on horizontal surfaces, such as shelves, bedside tables, windowsills or other storage areas. The electronic components and the circuit board of the detector are equipped with an insulating and protective layer of varnish with IZOVAX nanoparticles, protecting the electronics of the device even in very humid environments. The device can thus be placed or installed, for example, in bathrooms with storage, gas boilers, boiler rooms, drying rooms and the like.\u003cbr\/\u003e\u003cbr\/\u003eMemory of the highest measured value\u003cbr\/\u003eThe carbon monoxide detector SAFE 10YDCO - PRO has a memory function of the highest measured value. The memory records information about the highest measured CO concentration even in your absence. By pressing the TEST\/SILENCE combined button, you can call up and display this information on the LCD display, regarding the highest levels of measured values ??since the last memory reset.\u003cbr\/\u003e\u003cbr\/\u003eTemporary alarm silence function\u003cbr\/\u003eIf the detector detects a threshold level of carbon monoxide concentration, it will trigger an alarm to activate the alarm. In case of unwanted acoustic alarm signaling, it can be silenced temporarily by pressing the TEST\/SILENCE button for up to 9 minutes. The temporary silence mode is signaled by the device with a red LED indicator that flashes 4x every 5 seconds in a regularly repeating interval without accompanying acoustic buzzer signaling. If the CO concentration subsequently drops below predetermined values, the detector automatically switches to normal operating mode.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eSensor technology: electrochemical\u003cbr\/\u003eMicroprocessor: AI SAFE with prediction algorithm\u003cbr\/\u003eSilence the alarm: manually by pressing the TEST\/SILENCE button\u003cbr\/\u003ePCB protection: insulating and protective layer of paint with IZOVAX nanoparticles\u003cbr\/\u003eSource: 3V DC, one lithium battery (integrated for more than 10 years of operation)\u003cbr\/\u003eMounting method: on the wall or on a horizontal surface\u003cbr\/\u003eSignaling: acoustic (siren 85 dB) and optical (red, green and yellow LED indicator)\u003cbr\/\u003eOperating temperature: -10 °C to +55 °C\u003cbr\/\u003eOperating humidity: up to 95% relative humidity without condensation\u003cbr\/\u003eStorage conditions:\u003cbr\/\u003eTemperature: -20 °C - +60 °C\u003cbr\/\u003eHumidity: 5% - 95% relative humidity without condensation\u003cbr\/\u003eDimensions: 133.5mm x 63.5mm x 28.9mm\u003cbr\/\u003eWeight with batteries: 122 g\u003cbr\/\u003eApproval: ČSN EN 50291-1:2018 and ČSN EN 50291-1:2018\/AC:2021\u003cbr\/\u003eMarks: CE\u003cbr\/\u003eWarranty: 10 years (for device and battery)","brand":"SAFE","offers":[{"title":"Default Title","offer_id":53044137623890,"sku":"08831615","price":990.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08831615_d86dc65e-2c26-4d0d-b217-82aa820cd333.png?v=1776148560"},{"product_id":"detektor-koure-safe-10y30-pro","title":"Smoke detector SAFE 10Y30-PRO","description":"Fire and smoke detector SAFE 10Y30 – PRO\u003cbr\/\u003eA new generation of fire detector with breakthrough dual-spectral dust detection of a resistant optical chamber and SIC technology for temporarily silencing the alarm using an IR remote control. Power is provided by an integrated lithium battery (built-in, non-changeable) guaranteeing an extremely long operation of the device for more than 10 years and an extended 10-year warranty for both the battery and the device itself. The fire detector SAFE 10Y30 – PRO represents a new level of standard in the field of fire safety in residential buildings.\u003cbr\/\u003e\u003cbr\/\u003eThe fire detector SAFE 10Y30 – PRO has a whole range of new technologies, including the AI SAFE microprocessor for filtering false alarms in real time.\u003cbr\/\u003e\u003cbr\/\u003eThe fire detector meets all the standards of the ČSN EN 14604:2009 standard for installations according to Decree 268\/2011 Coll. (formerly No. 23\/2008 Coll.), on the technical conditions for fire protection of buildings, which stipulates that every new building and defined construction object must be equipped with an autonomous detection and signaling device and offers an electronic version of the Declaration of Properties documentation, which is mandatory for the approval procedure.\u003cbr\/\u003e\u003cbr\/\u003eFire and smoke detector SAFE 10Y30 - PRO with a 10-year warranty\u003cbr\/\u003eA new generation of fire detector for continuous monitoring of air for the presence of smoke with breakthrough detection of dual-spectral dust-resistant optical chamber powered by an integrated lithium battery (built-in, non-changeable) guaranteeing an extremely long operation of the device for more than 10 years and an extended 10-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eSAFE 10Y30 – PRO is a smoke fire detector in a timeless compact design combining the latest hardware and software technologies applied to the functional design of an intelligent detector representing a new level of standard in the field of residential fire safety.\u003cbr\/\u003e\u003cbr\/\u003eUnique dual-spectral smoke chamber technology\u003cbr\/\u003eA dual-spectral optical sensor with a blue and infrared LED source with different wavelengths has been integrated into a dust and insect proof, smoke detection chamber. The construction of the chamber with a direct connection to the AI SAFE microprocessor thus offers the most reliable method of detection, which, in combination with a prediction algorithm, enables the measurement of the concentration of microparticles directly in the air and in real time. This unique technology can thus determine the size of volatile particles inside the optical chamber and react only to a real threat in the form of smoke, while ignoring the similar composition of water vapor or other vapors.\u003cbr\/\u003e\u003cbr\/\u003eOnly respond to real threats\u003cbr\/\u003eIn the case of fire detection systems in residential buildings, the priority is to inform people in time about the imminent real danger. The AI SAFE microprocessor was developed based on a detailed analysis of the burning properties of materials and works with a predictive algorithm that compares data from a dual-spectral optical sensor and filters the potential for false alarms in real time. If the recorded data corresponds to liquid particles of water vapor or other types of vapors, the detector will not respond. However, if the dynamics of the data pattern correspond to the actual parameters of the smoke solid particles of the fire, the detector will immediately trigger the fire alarm.\u003cbr\/\u003e\u003cbr\/\u003eFire alarm signaling\u003cbr\/\u003eIf the smoke concentration reaches a set value during detection, the detector will automatically trigger a loud acoustic alarm signal with a power of 85 dB, accompanied by flashing of the red LED indicator as a sign of a fire alarm.\u003cbr\/\u003e\u003cbr\/\u003eSIC technology and remote silencing of the alarm by IR remote control\u003cbr\/\u003eThe detector has a combined button with the function TEST and SILENCE, which is intended both for testing and verifying the correct functioning of the device and for temporarily silencing the detector. If you know the cause of the fire alarm activation and you need to silence the loud acoustic signaling of the siren, there is no need to get to the detector itself in any complicated way in order to silence it with the help of a button. SIC technology allows you to remotely silence acoustic signaling by pressing any button on a regular IR remote control (most controls for household appliances, for example, TV).\u003cbr\/\u003e\u003cbr\/\u003eNo false alarms\u003cbr\/\u003eThe electronic components and circuit board of the detector are equipped with an insulating and protective layer of varnish with IZOVAX nanoparticles, and thanks to the innovative technology of the dual-spectral optical sensing chamber, which can distinguish smoke particles from water vapor, unlike conventional fire detectors, the device can also be installed in very humid environments (in near bathrooms, dryers, kitchens or utility rooms).\u003cbr\/\u003e\u003cbr\/\u003eGuaranteed operational performance for decades\u003cbr\/\u003ePower supply is provided by an integrated 3 V lithium battery (built-in, non-changeable) guaranteeing extremely long operation of the detector for more than 10 years. Battery operation enables quick and easy installation and ensures proper smoke and fire alarm operation for more than 10 years after activation. The power battery is activated after placing and fixing the detector in the mounting bracket. After 10 years of protection and 30 days in advance, the detector will notify you of the end of its useful life and automatically notify you that it needs to be replaced. The extended 10-year warranty applies as and the battery, as well as on the device itself.\u003cbr\/\u003e\u003cbr\/\u003eApproval\u003cbr\/\u003eThe SAFE 10Y30 – PRO fire detector uses modern photoelectric (optical) technology using a dual-spectral sensing chamber and has been independently tested by the accredited German TÜV laboratory as meeting all European standards. It goes without saying that both the CE certificate and approval according to the ČSN EN 14604:2009 standard for installations according to Decree No. 268\/2011 Coll. (formerly No. 23\/2008 Coll.), on the technical conditions of fire protection of buildings, which stipulates that every new building and defined construction object must be equipped with an autonomous detection and signaling device.\u003cbr\/\u003e\u003cbr\/\u003eDocumentation for the approval procedure\u003cbr\/\u003eOn the basis of Construction Act No. 284\/2021 Coll. and according to Decree No. 268\/2011 Coll. (formerly No. 23\/2008 Coll.), on the technical conditions of fire protection of buildings, based on a fire report, the building must be equipped with an autonomous detection and signaling system in the form of a fire detector that meets the standards of ČSN EN 14604:2009. The above-mentioned fulfillment of the technical parameters must be declared by documenting the fire alarm as a construction product in accordance with the Regulation of the European Parliament and the Council (EU) No. 305\/2011 in the approved form \"Declaration of Properties\".\u003cbr\/\u003e\u003cbr\/\u003eHere you will find the electronic version of the Declaration of Properties for the SAFE 10Y30 - PRO fire detector documentation necessary for your acceptance procedure.\u003cbr\/\u003e\u003cbr\/\u003eWhere to install\u003cbr\/\u003eAt least one fire detector should be installed on each floor of the house, in front of each sleeping area or in the immediate vicinity of bedrooms.\u003cbr\/\u003e\u003cbr\/\u003eA functional fire detector provides immediate warning of smoke or fire in the house and thus doubles the chance of survival of all persons in the house.\u003cbr\/\u003e\u003cbr\/\u003eTesting\u003cbr\/\u003eThe best way to test and maintain a fire detector sensor in working order is with SAFE 220 spray test gas. This spray test gas verifies that fire and smoke detector circuits and systems are working reliably and are actively searching for any indication of smoke particles.\u003cbr\/\u003e\u003cbr\/\u003eSmall and compact fire and smoke detector\u003cbr\/\u003eDual-spectral optical (photoelectric) chamber for smoke detection\u003cbr\/\u003eIt can distinguish smoke from steam without false alarms\u003cbr\/\u003eUnique design of dust and insect resistant smoke detection chamber\u003cbr\/\u003eDocumentation Declaration of properties for approval procedure\u003cbr\/\u003eBuilt-in lithium battery - no replacement required, the battery will provide power for the entire life of the device\u003cbr\/\u003eLoud acoustic alarm signaling with a power of 85dB\u003cbr\/\u003eFunctionality of testing and verifying the proper functioning of the device\u003cbr\/\u003eSilence the alarm:\u003cbr\/\u003e– SIC technology for remote silencing of the alarm by IR remote control\u003cbr\/\u003e– Button for manual silence of the alarm\u003cbr\/\u003eBattery powered and guaranteed operating performance for more than 10 years\u003cbr\/\u003eInstallation on the wall or ceiling\u003cbr\/\u003eThanks to the protective layer with IZOVAX nanoparticles, installation is also possible in humid environments\u003cbr\/\u003eDevice end of life signaling\u003cbr\/\u003eMinimal operating costs\u003cbr\/\u003eSimple assembly and operation\u003cbr\/\u003eTimeless and modern design\u003cbr\/\u003e10-year warranty on the device, including the power battery\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eSensor technology: Dual-spectral optical (photoelectric)\u003cbr\/\u003eMicroprocessor: AI SAFE with prediction algorithm\u003cbr\/\u003eRemote alarm silencing: SIC technology for remote alarm silencing by IR remote control\u003cbr\/\u003ePCB protection: Insulating and protective varnish layer with IZOVAX nanoparticles\u003cbr\/\u003eSource: 3V DC, one lithium battery (integrated for more than 10 years of operation)\u003cbr\/\u003eMounting method: On the ceiling or wall (mounting material is included in the package)\u003cbr\/\u003eSignaling: acoustic (siren 85 dB) and optical (red LED indicator)\u003cbr\/\u003eOperating temperature: –10 °C to +55 °C\u003cbr\/\u003eOperating humidity: Up to 95% relative humidity without condensation\u003cbr\/\u003eStorage conditions:\u003cbr\/\u003eTemperature: –20 °C – +60 °C\u003cbr\/\u003eHumidity: 5% - 95% relative humidity without condensation\u003cbr\/\u003eDimensions: diameter 81.5 mm, height 51.6 mm (with mounting bracket)\u003cbr\/\u003eWeight with batteries: 110 g\u003cbr\/\u003eApproval: ČSN-EN 14604:2009\u003cbr\/\u003eMarks: CE 1008-CPR-MC 69266708","brand":"SAFE","offers":[{"title":"Default Title","offer_id":53044244939090,"sku":"08831596","price":490.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08831596_5a4f5034-3ba0-4a9a-b9a0-8f0adf1e5c22.png?v=1776147954"},{"product_id":"detektor-koure-safe-10y30-basic","title":"Smoke detector SAFE 10Y30-BASIC","description":"A new generation of fire detector with breakthrough dual-spectral dust detection of a resistant optical chamber and SIC technology for temporarily silencing the alarm using an IR remote control. Power is provided by an integrated lithium battery (built-in, non-changeable) guaranteeing an extremely long operation of the device for more than 10 years and an extended 7-year warranty for both the battery and the device itself. The fire detector SAFE 10Y30 – BASIC represents a new level of standard in the field of fire safety in residential buildings.\u003cbr\/\u003e\u003cbr\/\u003eThe fire detector SAFE 10Y30 – BASIC has a whole range of new technologies, including SIC for remote silencing of the alarm with an IR remote control.\u003cbr\/\u003e\u003cbr\/\u003eThe fire detector meets all the standards of the ČSN EN 14604:2009 standard for installations according to Decree 268\/2011 Coll. (formerly No. 23\/2008 Coll.), on the technical conditions for fire protection of buildings, which stipulates that every new building and defined construction object must be equipped with an autonomous detection and signaling device and offers an electronic version of the Declaration of Properties documentation, which is mandatory for the approval procedure.\u003cbr\/\u003e\u003cbr\/\u003eFire and smoke detector SAFE 10Y30 – BASIC with a 7-year warranty\u003cbr\/\u003eA new generation of fire detector for continuous monitoring of air for the presence of smoke with breakthrough detection of dual-spectral dust-resistant optical chamber powered by an integrated lithium battery (built-in, non-changeable) guaranteeing an extremely long operation of the device for more than 10 years and an extended 7-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eSAFE 10Y30 – BASIC is a smoke fire detector in a timeless compact design combining the latest hardware and software technologies applied to the functional design of an intelligent detector representing a new level of standard in the field of residential fire safety.\u003cbr\/\u003e\u003cbr\/\u003eUnique dual-spectral smoke chamber technology\u003cbr\/\u003eA dual-spectral optical sensor with a blue and infrared LED source with different wavelengths has been integrated into a dust and insect proof, smoke detection chamber. The construction of the chamber with a direct connection to the AI SAFE microprocessor thus offers the most reliable method of detection, which, in combination with a prediction algorithm, enables the measurement of the concentration of microparticles directly in the air and in real time. This unique technology can thus determine the size of volatile particles inside the optical chamber and react only to a real threat in the form of smoke, while ignoring the similar composition of water vapor or other vapors.\u003cbr\/\u003e\u003cbr\/\u003eOnly respond to real threats\u003cbr\/\u003eIn the case of fire detection systems in residential buildings, the priority is to inform people in time about the imminent real danger. The AI SAFE microprocessor was developed based on a detailed analysis of the burning properties of materials and works with a predictive algorithm that compares data from a dual-spectral optical sensor and filters the potential for false alarms in real time. If the recorded data corresponds to liquid particles of water vapor or other types of vapors, the detector will not respond. However, if the dynamics of the data pattern correspond to the actual parameters of the smoke solid particles of the fire, the detector will immediately trigger the fire alarm.\u003cbr\/\u003e\u003cbr\/\u003eFire alarm signaling\u003cbr\/\u003eIf the smoke concentration reaches a set value during detection, the detector will automatically trigger a loud acoustic alarm signal with a power of 85 dB, accompanied by flashing of the red LED indicator as a sign of a fire alarm.\u003cbr\/\u003e\u003cbr\/\u003eSIC technology and remote silencing of the alarm by IR remote control\u003cbr\/\u003eThe detector has a combined button with the function TEST and SILENCE, which is intended both for testing and verifying the correct functioning of the device and for temporarily silencing the detector. If you know the cause of the fire alarm activation and you need to silence the loud acoustic signaling of the siren, there is no need to get to the detector itself in any complicated way in order to silence it with the help of a button. SIC technology allows you to remotely silence acoustic signaling by pressing any button on a regular IR remote control (most controls for household appliances, for example, TV).\u003cbr\/\u003e\u003cbr\/\u003eNo false alarms\u003cbr\/\u003eThe electronic components and circuit board of the detector are equipped with an insulating and protective layer of varnish with IZOVAX nanoparticles, and thanks to the innovative technology of the dual-spectral optical sensing chamber, which can distinguish smoke particles from water vapor, unlike conventional fire detectors, the device can also be installed in very humid environments (in near bathrooms, dryers, kitchens or utility rooms).\u003cbr\/\u003e\u003cbr\/\u003eGuaranteed operational performance for decades\u003cbr\/\u003ePower supply is provided by an integrated 3 V lithium battery (built-in, non-changeable) guaranteeing extremely long operation of the detector for more than 10 years. Battery operation enables quick and easy installation and ensures proper smoke and fire alarm operation for more than 10 years after activation. The power battery is activated after placing and fixing the detector in the mounting bracket. After 10 years of protection and 30 days in advance, the detector will notify you of the end of its useful life and automatically notify you that it needs to be replaced. The extended 7-year warranty covers both the battery and the device itself.\u003cbr\/\u003e\u003cbr\/\u003efire detector SAFE 10Y30 – BASIC uses modern photoelectric (optical) technology using a dual-spectral sensing chamber and has been independently tested by the accredited German TÜV laboratory as meeting all European standards. It goes without saying that both the CE certificate and approval according to the ČSN EN 14604:2009 standard for installations according to Decree No. 268\/2011 Coll. (formerly No. 23\/2008 Coll.), on the technical conditions of fire protection of buildings, which stipulates that every new building and defined construction object must be equipped with an autonomous detection and signaling device.\u003cbr\/\u003e\u003cbr\/\u003eDocumentation for the approval procedure\u003cbr\/\u003eOn the basis of Construction Act No. 284\/2021 Coll. and according to Decree No. 268\/2011 Coll. (formerly No. 23\/2008 Coll.), on the technical conditions of fire protection of buildings, based on a fire report, the building must be equipped with an autonomous detection and signaling system in the form of a fire detector that meets the standards of ČSN EN 14604:2009. The above-mentioned fulfillment of the technical parameters must be declared by documenting the fire alarm as a construction product in accordance with the Regulation of the European Parliament and the Council (EU) No. 305\/2011 in the approved form \"Declaration of Properties\".\u003cbr\/\u003e\u003cbr\/\u003eHere you will find the electronic version of the Declaration of Properties for the fire detector SAFE 10Y30 – BASIC documentation necessary for your acceptance procedure.\u003cbr\/\u003e\u003cbr\/\u003eWhere to install\u003cbr\/\u003eAt least one fire detector should be installed on each floor of the house, in front of each sleeping area or in the immediate vicinity of bedrooms.\u003cbr\/\u003e\u003cbr\/\u003eA functional fire detector provides immediate warning of smoke or fire in the house and thus doubles the chance of survival of all persons in the house.\u003cbr\/\u003e\u003cbr\/\u003eDual-spectral optical (photoelectric) chamber for smoke detection\u003cbr\/\u003eIt can distinguish smoke from steam without false alarms\u003cbr\/\u003eUnique design of dust and insect resistant smoke detection chamber\u003cbr\/\u003eDocumentation Declaration of properties for approval procedure\u003cbr\/\u003eBuilt-in lithium battery - no replacement required, the battery will provide power for the entire life of the device\u003cbr\/\u003eLoud acoustic alarm signaling with a power of 85dB\u003cbr\/\u003eFunctionality of testing and verifying the proper functioning of the device\u003cbr\/\u003eSilence the alarm:\u003cbr\/\u003e– SIC technology for remote silencing of the alarm by IR remote control\u003cbr\/\u003e– Button for manual silence of the alarm\u003cbr\/\u003eBattery powered and guaranteed operating performance for more than 10 years\u003cbr\/\u003eInstallation on the wall or ceiling\u003cbr\/\u003eThanks to the protective layer with IZOVAX nanoparticles, installation is also possible in humid environments\u003cbr\/\u003eDevice end of life signaling\u003cbr\/\u003eMinimal operating costs\u003cbr\/\u003eSimple assembly and operation\u003cbr\/\u003eTimeless and modern design\u003cbr\/\u003e7-year warranty on the device including the power battery\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eSensor technology: Dual-spectral optical (photoelectric)\u003cbr\/\u003eMicroprocessor: AI SAFE with prediction algorithm\u003cbr\/\u003eRemote alarm silencing: SIC technology for remote alarm silencing by IR remote control\u003cbr\/\u003ePCB protection: Insulating and protective varnish layer with IZOVAX nanoparticles\u003cbr\/\u003eSource: 3V DC, one lithium battery (integrated for up to 10 years of operation)\u003cbr\/\u003eMounting method: On the ceiling or wall (mounting material is included in the package)\u003cbr\/\u003eSignaling: acoustic (siren 85 dB) and optical (red LED indicator)\u003cbr\/\u003eOperating temperature: –10 °C to +55 °C\u003cbr\/\u003eOperating humidity: Up to 95% relative humidity without condensation\u003cbr\/\u003eStorage conditions:\u003cbr\/\u003eTemperature: –20 °C – +60 °C\u003cbr\/\u003eHumidity: 5% - 95% relative humidity without condensation\u003cbr\/\u003eDimensions: diameter 81.5 mm, height 51.6 mm (with mounting bracket)\u003cbr\/\u003eWeight with batteries: 110 g\u003cbr\/\u003eApproval: ČSN-EN 14604:2009\u003cbr\/\u003eMarks: CE 1008-CPR-MC 69266708","brand":"SAFE","offers":[{"title":"Default Title","offer_id":53044354810194,"sku":"08831595","price":380.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08831595_e7785de5-6590-40e1-82f0-32427fd1951b.png?v=1776147954"}],"url":"https:\/\/tipa-production.myshopify.com\/en\/collections\/brand-safe.oembed","provider":"TIPA","version":"1.0","type":"link"}