{"title":"Water heating","description":"Using photovoltaics to heat water not only saves money, but also helps to protect the environment. We offer controllers, wattrouters and complete kits that allow you to \u003ca href=\"https:\/\/www.tipa.eu\/cz\/hv-vysokonapetove-baterie\/c-2937\/\"\u003euse solar energy\u003c\/a\u003e to heat water in your home.","products":[{"product_id":"solarni-regulator-volt-green-boost-pro-5000-sinus-bypass-pro-ohrev-vody","title":"Solar controller VOLT Green Boost Pro 5000 Sinus BYPASS for water heating","description":"Solar inverter GREEN BOOST PRO 5000 SINUS BYPASS is used to power heating devices from photovoltaic panels and the electricity grid.\u003cbr\/\u003e\u003cbr\/\u003eWhat makes the GREEN BOOST PRO 5000 SINUS BYPASS solar inverter unique?\u003cbr\/\u003e\u003cbr\/\u003eMultifunctionality (BYPASS) - the inverter can be connected to both solar panels and the electrical grid.\u003cbr\/\u003ePure sine wave - the inverter produces a \"sine wave\" output voltage. This allows it to power inductive devices such as power tools, air conditioners, refrigerators, freezers, etc.\u003cbr\/\u003e\u003cbr\/\u003eHow does the GREEN BOOST PRO 5000 SINUS BYPASS solar inverter work?\u003cbr\/\u003eThe direct current generated by solar panels is not suitable for directly powering heating devices. The inverter converts it into alternating current that can be used to power heating devices. The panels should be connected in series with a total voltage of up to 500 V (Voc) and an impedance of up to 15 A.\u003cbr\/\u003e\u003cbr\/\u003eWhat devices does the GREEN BOOST PRO 5000 SINUS BYPASS solar inverter power?\u003cbr\/\u003e\u003cbr\/\u003eElectric boilers\u003cbr\/\u003eRadiators\u003cbr\/\u003eElectric heaters\u003cbr\/\u003eElectric mats\u003cbr\/\u003eUnderfloor heating\u003cbr\/\u003e\u003cbr\/\u003eTechnical data\u003cbr\/\u003e\u003cbr\/\u003eMaximum power:5000 W\u003cbr\/\u003eOutput voltage range:70-245 V AC \/ 50 Hz\u003cbr\/\u003eAllowable voltage range from Voc panels:160 V DC - 500 V DC\u003cbr\/\u003eMaximum power output of PV panels:? 5000 W\u003cbr\/\u003eMaximum DC current from Imp panels:15A\u003cbr\/\u003eOutput voltage type:Pure sine\u003cbr\/\u003eSolar panel connection:In series\u003cbr\/\u003eOutput socket:1 pcs\/1 connection rail\u003cbr\/\u003eOperating mode:MPPT \/ STABLE\u003cbr\/\u003eDisplay:LED\u003cbr\/\u003eOverload protection:Yes\u003cbr\/\u003eShort circuit protection:Yes\u003cbr\/\u003eOver temperature protection:Yes - 100±10?\u003cbr\/\u003eCooling:Active fans\u003cbr\/\u003eWarning:Audible and visual signals\u003cbr\/\u003eOverheat protection:Yes \/ 100±10?\u003cbr\/\u003eOperating Temperature:-25 to +55°C\u003cbr\/\u003eStorage temperature:-20 to +55°C\u003cbr\/\u003eProtection Class:IP20\u003cbr\/\u003eDimensions:311x232x140mm (including MC-4)\u003cbr\/\u003eWeight:5.2 kg","brand":"VOLT","offers":[{"title":"Default Title","offer_id":52541905469778,"sku":"04280462","price":8459.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04280462_0d032b5a-586a-40a5-a903-83a417fb6bef.png?v=1776149602"},{"product_id":"wattrouter-eco","title":"Wattrouter ECO","description":"WATTrouter ECO is a programmed controller for optimizing self-consumption for buildings with a photovoltaic power plant installed. The current measuring range is 3x20A, continuous load 3x40A. When properly installed and set up, the controller perfectly optimizes the use of the excess energy produced by your PV plant. The return on the equipment according to the output of the PV plant and the possibilities of using the produced energy can be as little as 4 months!\u003cbr\/\u003e\u003cbr\/\u003eWATTrouter ECO is based on the development of WATTrouter M, integrates some of its features in the standard version while maintaining a very low purchase price.\u003cbr\/\u003e\u003cbr\/\u003eThe WATTrouter ECO is completely noiseless, as the power triacs known from the WATTrouter CWx have been replaced by SSR outputs to which passively cooled power SSR relays are connected. Thus, a total of 4 SSR outputs are available. This eliminates problems with fan noise, dust and the need to repair the controller in the event of damage to the power triacs by a short circuit. Power SSR can also be dimensioned according to both current carrying capacity and cooling options.\u003cbr\/\u003e\u003cbr\/\u003eWATTrouter ECO is an ideal choice for users who do not want to invest a lot of money in surplus regulation, do not need increased connection comfort (monitoring via the Internet, etc.), but need a reliable and functional product.\u003cbr\/\u003e\u003cbr\/\u003eThe ECO WATTrouter consists of a measuring module and its own controller. The controller settings are made from a personal computer (notebook, mini-notebook, or desktop PC) using the USB interface.\u003cbr\/\u003e\u003cbr\/\u003eThe package contains: 1 pc WATTrouter ECO controller, 1 pc WATTrouter ECO measuring module, 1 pc USB cable, 1 pc instruction.","brand":"SOLAR CONTROLS","offers":[{"title":"Default Title","offer_id":52555003035986,"sku":"04290089","price":5138.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04290089.png?v=1776147179"},{"product_id":"solarni-invertor-geti-gwh01-4000w-mppt-pro-pv-ohrev-vody","title":"GETI GWH01 4000W MPPT solar inverter for PV water heating","description":"The GETI GWH01 4000W MPPT inverter enables the direct use of photovoltaic panel systems to power resistance heating devices such as electric boilers, heaters, heating mats, water heating, etc. The inverter is also equipped with an AC input, which allows connecting the inverter to the mains voltage and heating water even in a time when sunlight is insufficient for heating.\u003cbr\/\u003e\u003cbr\/\u003eNote: The GETI GWH inverter is only suitable for resistive loads with a bimetallic thermostat (not suitable for electronically controlled thermostats!)\u003cbr\/\u003e           The inverter output (L, N) must not be connected to the mains or earth!\u003cbr\/\u003e\u003cbr\/\u003eThe system is simple, it only requires the connection of the appropriate number of photovoltaic panels with a maximum output of 4000W with an operating voltage of 160 ~ 350V DC, a mains voltage of 230C AC and a connection with a resistive load, e.g. electric heater, electric boiler, heating coils, underfloor heating, etc.\u003cbr\/\u003e\u003cbr\/\u003eThe GETI GWH01 inverter is equipped with an LED diode panel that informs the user about the current status of the inverter. :\u003cbr\/\u003e- indication of water heating from PV panels\u003cbr\/\u003e- indication of water heating from the 230V AC network\u003cbr\/\u003e- traffic indication\u003cbr\/\u003e- error status indication\u003cbr\/\u003e\u003cbr\/\u003eThe direct current generated in the panels, which cannot be fed directly to the heating devices, is converted into alternating current in the inverter, which can be used to power the heating devices.\u003cbr\/\u003e\u003cbr\/\u003eThe maximum power of the system is 4000 W. The inverter has a priority input from the photovoltaic panels, and when this voltage drops below 120V, the water heating will be powered from the mains voltage of 230V AC.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- input voltage (VDC): 160 to 350 (VDC)\u003cbr\/\u003e- input voltage (VAC): 230 V AC\u003cbr\/\u003e- output voltage [VAC]:  0-260 V AC (VAC)\u003cbr\/\u003e- maximum power: 4000 W\u003cbr\/\u003e- load type: resistive with bimetal thermostat (not suitable for electronically controlled thermostats!)\u003cbr\/\u003e- the value of the resistive load must not be lower than 13 Ohm\u003cbr\/\u003e- MPPT function: YES\u003cbr\/\u003e- connection of PV panels: Series or series-parallel\u003cbr\/\u003e- priority input: PV panels\u003cbr\/\u003e- backup input: mains 230V AC\u003cbr\/\u003e- working temperature: -25 °C ~ + 55 °C\u003cbr\/\u003e- efficiency: \u003e 99%\u003cbr\/\u003e- cooling: passive\u003cbr\/\u003e- protection against short circuit at the input\u003cbr\/\u003e- protection against overheating\u003cbr\/\u003e- cooling: passive\u003cbr\/\u003e- input connection of PV panels: MC4 connectors\u003cbr\/\u003e- input connection 230V AC: screw terminal\u003cbr\/\u003e- 230V AC output connection: screw terminal\u003cbr\/\u003e- material: Aluminum\u003cbr\/\u003e- degree of protection: IP65\u003cbr\/\u003e- dimensions L x W x H [mm]: 250 x 155 x 80 mm\u003cbr\/\u003e- weight: 3 kg\u003cbr\/\u003e\u003cbr\/\u003ePackaging: 1 pc\u003cbr\/\u003e\u003cbr\/\u003ePackage contents: 1 pc Solar inverter GETI GWH01 4000W ","brand":"GETI","offers":[{"title":"Default Title","offer_id":52557103038802,"sku":"04290246","price":4499.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04290246_f6bdeb49-8dfc-486e-8676-55a593a21e1f.png?v=1776147689"},{"product_id":"greenbono-set-pro-ostrovni-menice","title":"GreenBonO set for island inverters","description":"Regulátor s plynulou regulací výkonu pro dokonalé využití elektřiny z libovolné fotovoltaické elektrárny. (v režimu wattrouteru nebo vytěžovače pro off-grid měniče).\u003cbr\u003e\u003cbr\u003eSet obsahuje:\u003cbr\u003e1x GBO Aku (1f)\u003cbr\u003e1x SSR RM1B23D50 s chladičom RHS100\u003cbr\u003e1x DCSG\u003cbr\u003e","brand":"GBO-AKU","offers":[{"title":"Default Title","offer_id":52557307052370,"sku":"04290277","price":6999.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04290277.png?v=1776147487"},{"product_id":"ohrivac-vody-midea-m-d10-20vio-10l","title":"Water heater MIDEA M-D10-20VIO 10l","description":"Midea electric storage water heater\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eVolume: 10 l\u003cbr\/\u003eHeating power: 2000 W\u003cbr\/\u003eMechanical thermostat\u003cbr\/\u003eWater temperature: 30°C-65°C.\u003cbr\/\u003eMax. temperature: 105°C\u003cbr\/\u003eMax. operating pressure: 0.75 MPa\u003cbr\/\u003eConnection type: bottom\u003cbr\/\u003eVertical wall mounting\u003cbr\/\u003eHeating indicator\u003cbr\/\u003eProtection: against overheating, against corrosion (magnesium anode), against switching on without water\u003cbr\/\u003eSafety valve\u003cbr\/\u003eInner tank: enamelled steel\u003cbr\/\u003eOuter casing: HIPS\u003cbr\/\u003eHeating element: enamelled stainless steel SUS316L\u003cbr\/\u003eConnector type: G1\/2\u003cbr\/\u003eCable length: 1.5 m\u003cbr\/\u003eProtection class: I\u003cbr\/\u003eDegree of protection: IPX4\u003cbr\/\u003eEnergy class: A\u003cbr\/\u003eDimensions: 32.4 x 32.4 x 31.5 cm\u003cbr\/\u003eColour: white\u003cbr\/\u003e\u003cbr\/\u003eSet includes: safety valve, mounting screws and dowels","brand":"MIDEA","offers":[{"title":"Default Title","offer_id":52613070586194,"sku":"06445979","price":2999.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06445979_6192e480-cced-47c9-8f13-0d5db596043b.png?v=1776149600"},{"product_id":"solarni-regulator-volt-green-boost-4000-bypass","title":"Solárny regulátor VOLT Green Boost 4000 BYPASS","description":"The GREEN BOOST 4000 BYPASS solar regulator is used to power heating devices from PV solar panels and the electrical network.\u003cbr\/\u003e\u003cbr\/\u003eWhat makes the GREEN BOOST 4000 BYPASS solar controller different?\u003cbr\/\u003eMultifunctionality (BYPASS) - the controller can be connected to both solar panels and the electrical network.\u003cbr\/\u003eThe panels should be connected in series with a total voltage of up to 350V. The maximum PV input current is 20A.\u003cbr\/\u003e\u003cbr\/\u003eWhat devices does the GREEN BOOST 4000 BYPASS solar controller power?\u003cbr\/\u003e\u003cbr\/\u003eElectric boilers\u003cbr\/\u003eRadiators\u003cbr\/\u003eElectric heaters\u003cbr\/\u003eElectric mats\u003cbr\/\u003eFloor heating\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eMaximum power: 4000W\u003cbr\/\u003eOutput voltage range: 180-260VAC\/50Hz\u003cbr\/\u003ePermissible voltage range from the panels: 160VDC-350VDC\u003cbr\/\u003eAllowable voltage range from panels (MPPT): 120VDC-340VDC\u003cbr\/\u003eMaximum direct current from the panels: 20A\u003cbr\/\u003eSolar panel connection: Serial\u003cbr\/\u003eInput socket: 2 pcs\u003cbr\/\u003eWorking mode: MPPT\/STABLE\u003cbr\/\u003eView: GUIDED\u003cbr\/\u003eOverload protection: Yes\u003cbr\/\u003eShort circuit protection: Yes\u003cbr\/\u003eOverheat protection: Yes - 100±10?\u003cbr\/\u003eCooling: Active \u003cbr\/\u003eWarning: Audible and visual signals\u003cbr\/\u003eOverheat protection: Yes \/ 100±10?\u003cbr\/\u003eWorking temperature: From -25 to +55°C\u003cbr\/\u003eStorage temperature: From -20 to +55°C\u003cbr\/\u003eDimensions: 195 x 183 x 100 mm\u003cbr\/\u003eWeight: 2.4 kg","brand":"VOLT","offers":[{"title":"Default Title","offer_id":53037399474514,"sku":"04280385","price":6820.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04280385_4170604c-bd5a-4f2e-839c-6aafd60d3252.png?v=1776148420"},{"product_id":"solarni-invertor-geti-gwh02d-4000w-mppt-pro-pv-ohrev-vody","title":"GETI GWH02D 4000W MPPT solar inverter for PV water heating","description":"The GETI GWH02D solar inverter is particularly suitable for use in systems for photovoltaic water heating.\u003cbr\/\u003e\u003cbr\/\u003eSave costs and heat water using solar energy today. With the GETI GWH02D Solar Inverter, featuring automatic switching to the grid and the ability to independently set the water heating temperature from PV or AC, you can significantly reduce your hot water heating costs.\u003cbr\/\u003e\u003cbr\/\u003eThe GETI GWH02D 4000W MPPT inverter, developed for PV water heating, allows direct use of photovoltaic panel systems to power resistive heating devices, such as water heaters, heaters, heating mats, or heating coils. Additionally, the inverter is equipped with an AC input, allowing it to be connected to the mains power and heat water even when solar radiation is insufficient for heating.\u003cbr\/\u003e\u003cbr\/\u003eNote: The GETI GWH inverter is only suitable for resistive loads with a bimetal thermostat (not suitable for electronically controlled thermostats!).\u003cbr\/\u003eThe inverter output (L, N) must not be connected to the electrical grid or grounded!\u003cbr\/\u003e\u003cbr\/\u003eThe system is simple, requiring only the connection of the appropriate number of photovoltaic panels with a maximum output of 4000W and an operating voltage of 160 ~ 350V DC, mains voltage of 230V AC, and connection to a resistive load, such as a heating coil, electric water heater, electric radiator, or underfloor heating and protective devices.\u003cbr\/\u003e\u003cbr\/\u003eThe direct current generated in the panels, which cannot be directly supplied to heating devices, is converted in the inverter to alternating current that can be used to power heating devices.\u003cbr\/\u003e\u003cbr\/\u003eThe maximum system power is 4000W. The inverter has a priority input from photovoltaic panels, and when this voltage drops below 120V, water heating will be powered by mains voltage 230V AC.\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- solar inverter for heating water using resistive load (heating coil, water heater)\u003cbr\/\u003e- temperature sensor\u003cbr\/\u003e- automatic switching between networks (PV \/ grid 230V AC)\u003cbr\/\u003e- operating modes: PV only as an island system or PV + grid\u003cbr\/\u003e- quiet operation ensured by passive cooling\u003cbr\/\u003e- effective maximum power tracking on panels using MPPT\u003cbr\/\u003e- high efficiency \u003e 99%\u003cbr\/\u003e\u003cbr\/\u003eThe GETI GWH02D inverter is equipped with a clear LED display that informs the user about current and set values:\u003cbr\/\u003e\u003cbr\/\u003e- indication of water heating from PV panels\u003cbr\/\u003e- indication of water heating from the 230V AC grid\u003cbr\/\u003e- water temperature (PV, AC) current and set\u003cbr\/\u003e- PV power\u003cbr\/\u003e- PV voltage\u003cbr\/\u003e- operation indication\u003cbr\/\u003e- error status indication\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- input voltage (VDC): 160 to 350 (VDC)\u003cbr\/\u003e- input voltage (VAC): 230 V AC\u003cbr\/\u003e- output voltage [VAC]:  0-260 V AC (VAC)\u003cbr\/\u003e- maximum power: 4000 W\u003cbr\/\u003e- PV input current: 20A max.\u003cbr\/\u003e- AC output current: 20A max.\u003cbr\/\u003e- load type: resistive with bimetal thermostat (not suitable for electronically controlled thermostats!)\u003cbr\/\u003e- the value of the resistive load must not be lower than 13 Ohm\u003cbr\/\u003e- MPPT function: YES\u003cbr\/\u003e- connection of PV panels: Series or series-parallel\u003cbr\/\u003e- priority input: PV panels\u003cbr\/\u003e- backup input: mains 230V AC\u003cbr\/\u003e- working temperature: -25 °C ~ + 55 °C\u003cbr\/\u003e- efficiency: \u003e 99%\u003cbr\/\u003e- temperature sensor length: 3m\u003cbr\/\u003e- cooling: passive\u003cbr\/\u003e- protection against short circuit at the input\u003cbr\/\u003e- protection against overheating\u003cbr\/\u003e- cooling: passive\u003cbr\/\u003e- input connection of PV panels: MC4 connectors\u003cbr\/\u003e- input connection 230V AC: screw terminal\u003cbr\/\u003e- 230V AC output connection: screw terminal\u003cbr\/\u003e- material: Aluminum\u003cbr\/\u003e- degree of protection: IP65\u003cbr\/\u003e- dimensions L x W x H [mm]: 255 x 201 x 95 mm\u003cbr\/\u003e- weight: 3 kg\u003cbr\/\u003e\u003cbr\/\u003ePackaging: 1 pc\u003cbr\/\u003e\u003cbr\/\u003ePackage contents: 1 pc Solar inverter GETI GWH02D 4000W","brand":"GETI","offers":[{"title":"Default Title","offer_id":53044412842322,"sku":"04291121","price":7399.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04291121_8da4f8f6-2df5-42bb-b79c-38b6bf8ca57a.png?v=1776148658"},{"product_id":"greenbono-aku-1f-rozbaleno-bez-originalniho-obalu","title":"GreenBonO-AKU (1f) - rozbaleno - bez originálního obalu","description":"GBO-Aku ( nový model regulátoru \"GreenBonO\" ). Regulátor s plynulou regulací výkonu pro dokonalé využití elektřiny z libovolné fotovoltaické elektrárny (v módu \"wattrouter\" nebo \"vytěžovač\"). Regulátor přebytku slouží k zapínání spotřebičů v době vyšší výroby než je samotná spotřeba v objektu. Regulátor přebytku plynule reguluje výkon elektrické spirály pomocí speciálních SSR relé. Tím pádem dosáhnete maximálně využijete vyrobené energie a minimalizujte nežádoucí průtoky do veřejné sítě.\u003cbr\u003e\u003cbr\u003eUpozornění:  pro firmy navyklé montovat Wattrouter Eco, polarita řídících signálů pro SSR je u nás obráceně, než u Wattrouteru Eco; u nás je společný vodič záporný, živé signály jsou kladné.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eTechnoické parametry:\u003cbr\u003e\u003cbr\u003e- napájecí napětí:\t230V 50Hz (nutné je připojení na tu fázi, na kterou je vyvedena FVE)\u003cbr\u003e- povolené napětí na svorkovnicích:\t- horní svorkovnice (vedle LED diod): 5V DC\u003cbr\u003e \u003cbr\u003e- dolní svorkovnice (napájení regulátoru a kontakty relé): 250V 50Hz\u003cbr\u003e  (jediná fáze na všech svorkách!)\u003cbr\u003e- bipolární analogové vstupy:\t3 vstupy, rozsah {-2,5V ... +2,5 V DC} (proti svorce Vcc\/2 ) 10 bit D\/A převod, pro externí proudové transformátory\u003cbr\u003e- volitelně: jeden vestavěný proud. transformátor 0 ... 12A~ (pro jednofázovou verzi)\u003cbr\u003e\u003cbr\u003e- unipolární analogové vstupy:\t2 vstupy, rozsah {0V ... +5,0 V DC} (proti svorce GND ) 10 bit D\/A převod, pro snímače napětí a proudu baterie\u003cbr\u003e- digitální (dvoustavové) vstupy:\t1 vstup 0\/5V, (proti svorce GND ) pro načtení signálu NT bezpotenciálovým kontaktem\u003cbr\u003e- digitální výstupy pro plynulé řízení výkonu: výstupy SSR\u003cbr\u003e\u003cbr\u003e- 6 výstupů s řídícím signálem 5V\/20mA: (pro externí SSR)\u003cbr\u003e\u003cbr\u003eFirmwary trojkové řady podporují všech 6 SSR. První zveřejněná verze je 3.002. Starší firmwary dvojkové řady (poslední=2.046) podporují pouze 3 SSR\u003cbr\u003e\u003cbr\u003e1.) (standardně) pro SSR (solid state relay) se spínáním v nule (pulsní modulace), volitelně:\u003cbr\u003e\u003cbr\u003e- spíná po jednotlivých, celých sinusových periodách (vždy obě půlvlny - bez ss.složky a vf.rušení, ale zdroj flikru)\u003cbr\u003e- spíná po půlperiodách (menší flikr, ss.složka)\u003cbr\u003e- spíná s v jednosekundových cyklech (kombinace tří stavů: vypnuto; každá druhá půlperioda; zapnuto) (nejpříznivější míra flikru při spínání v nule)\u003cbr\u003e\u003cbr\u003e2.) nebo (pomocí firmwaru \"phctrl\") pro SSR s okamžitým spínáním (fázové řízení (*) - toto provedení nevytváří flikr, generuje ale vyšší harmonické)\u003cbr\u003e\u003cbr\u003e- každý jeden výstup může ovládat 2 SSR doporučeného typu (s odběrem řídící elektrody 8,5mA\/5V), a dokáže tak symetricky řídit 3-fázový spotřebič\u003cbr\u003e- reléové výstupy: výstupy relé, celkem 5 relé, každé se spínacím kontaktem 230V~\/5A:  4 x relé pro postupné připojování zátěže, 1 x relé (K5) s volitelnou funkcí: spínací hodiny, páté relé kaskády, nebo indikace přebytků\u003cbr\u003e\u003cbr\u003e- ostatní výstupy:\tvýstup +5V\/20mA pro napájení proudového DC snímače\u003cbr\u003e- datové rozhraní pro komunikaci s PC:\t  RS485, protokol MODBUS, (9600,8,N,1)\u003cbr\u003e- regulace spotřeby přebytků z FVE:\tprozatím je v prvním stupni každé fáze plynulé řízení příkonu 0 ... 100% (v jednofázové verzi až kaskáda tří plynule řízených spotřebičů), výhledově bude v prvním stupni každé fáze kaskáda dvou plynule řízených spotřebičů, v jednofázovém provedení kaskáda až šesti plynule řízených spotřebičů\u003cbr\u003ev dalších stupních připínání neregulovaných spotřebičů se současnou regulací v prvním stupni\u003cbr\u003e- galvanické oddělení: elektrická pevnost mezi elektronikou (5V DC - horní svorkovnice) a silovou částí (230v AC - dolní svorkovnice):\t 4kV 50Hz, 1 minuta\u003cbr\u003e- stupeň krytí (ČSN EN 60529):\t IP 20\u003cbr\u003e- doporučené prostředí (ČSN 33 2000-3):\ttřída AB4 (-5...40°C, 5...95% rel.vlhkosti)\u003cbr\u003e- přípustné skladovací podmínky:\t-15...70°C, 5...95% rel.vlhkosti\u003cbr\u003e- rozměry [mm] (š,v,hl): 105 x 95 x 59 (skříňka MODULBOX 6M)\u003cbr\u003e\u003cbr\u003eInstalace zařízení je určena jen proškoleným technikům s elektrotechnickým vzděláním, vyhláškou č. 50\/1978 Sb. a se zkušenostmi s instalacemi regulační techniky pro FVE.\u003cbr\u003e\u003cbr\u003eBalení: 1ks\u003cbr\u003e\u003cbr\u003eObsah balení: 1ks GBO-AKU (1f)","brand":"GBO-AKU","offers":[{"title":"Default Title","offer_id":53047433888082,"sku":"90328186","price":5499.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/90328186.png?v=1776148693"},{"product_id":"wattrouter-mx-rozbaleno-bez-originalniho-obalu","title":"Wattrouter Mx - rozbaleno - bez originálního obalu","description":"U standardní varianty je proudový rozsah měření 3x20A, trvalého zatížení 3x40A, u varianty 100A je rozsah měření 3x100A, trvalého zatížení 3x125A. Po správné instalaci a nastavení regulátor dokonale optimalizuje využtí přebytků energie vyrobených vaší FVE. Návratnost zařízení dle výkonu FVE a možností využití vyrobené energie může být i pouhé 4 měsíce!\u003cbr\u003e\u003cbr\u003eWATTrouter Mx nabízí 6 SSR výstupů s možností plynulé regulace tepelných spotřebičů nebo PWM řízení, dále pak 2 reléové výstupy. Obsahuje též možnost instalace bezdrátového modulu SC-Gateway, dokonalejší časové plány, víceúčelové vstupy ANDI, integrovanou MicroSD kartu, snažší montáž\/demontáž díky rozpojitelným svorkovnicím a další vylepšení oproti předchozímu modelu M. WATTrouter Mx je tedy vhodný i pro ty nejnáročnější aplikace.\u003cbr\u003e\u003cbr\u003eWATTrouter Mx se skládá z měřicího modulu a vlastního regulátoru. Nastavení regulátoru se provádí z osobního počítače (notebook, mininotebook, popř. stolní PC) pomocí rozhraní USB nebo Ethernet. Přes rozhraní Ethernet lze nastavovat a sledovat i z jiných zařízení podporujících webový přístup.\u003cbr\u003e\u003cbr\u003eWATTrouter Mx je zcela bezhlučný, neboť výkonové triaky známé z WATTrouteru M byly nahrazeny SSR výstupy, na které se připojují pasivně chlazená výkonová SSR relé. Tímto odpadají potíže s hlukem ventilátoru, prašností a dále s nutností opravy regulátoru při případném poškození výkonových triaků zkratem. Výkonová SSR lze také dimenzovat jak podle proudové zatížitelnosti, tak podle možností chlazení.","brand":"SOLAR CONTROLS","offers":[{"title":"Default Title","offer_id":53047434477906,"sku":"90328088","price":9399.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/90328088.png?v=1776148851"},{"product_id":"solarni-regulator-volt-green-boost-mppt-3000-bypass-pro-ohrev-vody","title":"Solar regulator for water heating VOLT Green Boost MPPT 3000 BYPASS","description":"The VOLT GREEN BOOST MPPT 3000 BAYPASS solar converter is an advanced device for directly supplying heating systems with energy from photovoltaic panels. Thanks to the MPPT function, it ensures maximum energy efficiency, while the BAYPASS system allows automatic switching to the mains in case of insufficient energy production. The perfect solution for powering boilers, heaters, electric mats and underfloor heating.\u003cbr\/\u003e\u003cbr\/\u003eThe VOLT GREEN BOOST MPPT 3000 BAYPASS is a modern solar converter that converts the direct current generated by photovoltaic panels into alternating current, allowing direct powering of heating devices. The MPPT (Maximum Power Point Tracking) system optimizes the operation of the installation and maximizes the efficiency of energy conversion.\u003cbr\/\u003e\u003cbr\/\u003eThanks to the built-in BAYPASS function, the converter automatically switches to power from the mains in case of a lack of energy supplied by the PV panels. This ensures continuous heating operation even on days with low sunlight.\u003cbr\/\u003e\u003cbr\/\u003eFor the device to function properly, it is enough to connect 4 to 9 photovoltaic panels with a power of 250W to 400W each. The panels can be configured both in series and in series-parallel, thus adapting the installation to the user's conditions.\u003cbr\/\u003e\u003cbr\/\u003eThe VOLT GREEN BOOST MPPT 3000 BAYPASS solar inverter is ideal for powering:\u003cbr\/\u003e\u003cbr\/\u003eElectric boilers\u003cbr\/\u003eElectric heaters\u003cbr\/\u003eElectric mats\u003cbr\/\u003eRadiators\u003cbr\/\u003eUnderfloor heating\u003cbr\/\u003e\u003cbr\/\u003eThe device, thanks to its solid construction and numerous protections (overload, short circuit, thermal), ensures long-term and trouble-free operation. Active cooling and audible and visual warnings further increase user safety.\u003cbr\/\u003e\u003cbr\/\u003eDual output socket - Intelligent power management\u003cbr\/\u003e\u003cbr\/\u003eThe converter is equipped with two GB 3000 output sockets, which allow the connection of two heating devices simultaneously.\u003cbr\/\u003e\u003cbr\/\u003eThe first socket (PRIMARY) serves the main device and always has power priority.\u003cbr\/\u003eThe second outlet (SECONDARY) is activated automatically when the device connected to the first outlet stops consuming power. If the load on the PRIMARY outlet reappears, the power to the SECONDARY outlet will be interrupted.\u003cbr\/\u003eIn MPPT mode, the output voltage can range from 120V to 245V AC, depending on the power obtained from the PV panels.\u003cbr\/\u003eIn STABLE mode, the output voltage is 230V AC with sufficient PV energy.","brand":"VOLT","offers":[{"title":"Default Title","offer_id":53047437197650,"sku":"04280410","price":5299.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04280410.png?v=1776148872"},{"product_id":"solarni-regulator-volt-green-boost-pro-5000-sinus-bypass-pro-ohrev-vody-rozbaleno-poskozeny-obal","title":"Solární regulátor VOLT Green Boost Pro 5000 Sinus BYPASS pro ohřev vody - rozbaleno - poškozený obal","description":"Solární invertor GREEN BOOST PRO 5000 SINUS BYPASS se používá k napájení topných zařízení z fotovoltaických panelů a elektrické sítě.\u003cbr\u003e\u003cbr\u003eCo dělá solární invertor GREEN BOOST PRO 5000 SINUS BYPASS jedinečným?\u003cbr\u003e\u003cbr\u003eMultifunkčnost (BYPASS) - měnič lze připojit jak k solárním panelům, tak k elektrické síti.\u003cbr\u003eČistý sinus – měnič produkuje „sinusové“ výstupní napětí. To mu umožňuje napájet indukční zařízení, jako je elektrické nářadí, klimatizace, ledničky, mrazničky atd.\u003cbr\u003e\u003cbr\u003eJak funguje solární invertor GREEN BOOST PRO 5000 SINUS BYPASS?\u003cbr\u003eStejnosměrný proud generovaný solárními panely není vhodný pro přímé napájení topných zařízení. Invertor jej převádí na střídavý proud, který lze použít k napájení topných zařízení. Panely by měly být zapojeny sériově s celkovým napětím až 500 V (Voc) a impedancí až 15 A.\u003cbr\u003e\u003cbr\u003eJaká zařízení solární invertor GREEN BOOST PRO 5000 SINUS BYPASS napájí?\u003cbr\u003e\u003cbr\u003eElektrické kotle\u003cbr\u003eRadiátory\u003cbr\u003eElektrické ohřívače\u003cbr\u003eElektrické rohože\u003cbr\u003ePodlahové vytápění\u003cbr\u003e\u003cbr\u003eTechnické údaje\u003cbr\u003e\u003cbr\u003eMaximální výkon:5000 W\u003cbr\u003eRozsah výstupního napětí:70–245 V AC \/ 50 Hz\u003cbr\u003ePřípustný rozsah napětí z panelů Voc:160 V DC - 500 V DC\u003cbr\u003eMaximální výkon FV panelů:? 5000 W\u003cbr\u003eMaximální stejnosměrný proud z panelů Imp:15A\u003cbr\u003eTyp výstupního napětí:Čistý sinus\u003cbr\u003ePřipojení solárního panelu:V sérii\u003cbr\u003eVýstupní zásuvka:1 ks\/1 připojovací lišta\u003cbr\u003eProvozní režim:MPPT \/ STABILNÍ\u003cbr\u003eZobrazit:LED\u003cbr\u003eOchrana proti přetížení:Ano\u003cbr\u003eOchrana proti zkratu:Ano\u003cbr\u003eOchrana proti přehřátí:Ano - 100±10?\u003cbr\u003eChlazení:Aktivní ventilátory\u003cbr\u003eVarování:Zvukové a vizuální signály\u003cbr\u003eOchrana proti přehřátí:Ano \/ 100±10?\u003cbr\u003eProvozní teplota:Od -25 do +55 °C\u003cbr\u003eSkladovací teplota:Od -20 do +55 °C\u003cbr\u003eTřída ochrany: IP20\u003cbr\u003eRozměry:311x232x140mm (včetně MC-4)\u003cbr\u003eVáhy:5,2 kg","brand":"VOLT","offers":[{"title":"Default Title","offer_id":53204222869842,"sku":"90329957","price":8199.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/90329957.jpg?v=1777021983"}],"url":"https:\/\/tipa-production.myshopify.com\/en\/collections\/ohrev-vody.oembed","provider":"TIPA","version":"1.0","type":"link"}