{"title":"Off-grid Inverters","description":"Island (Off-grid) inverters are ideal for systems that are not connected to the public power grid.","products":[{"product_id":"menic-napeti-victron-energy-1200va-12v-ve-direct","title":"Voltage converter Victron Energy 1200VA 12V VE.Direct","description":"The drive features a rugged toroidal transformer that has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eThe inverters are short - circuit proof and protected against overheating, whether due to overload or overload\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e \u003cbr\/\u003eThis inverter is fully configurable - it is a completely unique function, where you can set the following parameters using a PC:\u003cbr\/\u003e• Low and high battery alarm and reset level\u003cbr\/\u003e• Inverter shutdown level at low and high battery voltage and reset level\u003cbr\/\u003e• Output voltage 220\/230 \/ 240V\u003cbr\/\u003e• Frequency 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode enable \/ disable sensitivity setting (setting the level when the drive \"sleeps\" and when it \"wakes up\" again)\u003cbr\/\u003e \u003cbr\/\u003eMonitoring is also available:\u003cbr\/\u003e• input and output voltage and current, temperature, alarms\u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eNeeded to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it sleeps and the inverter's own consumption is then only about 1W). In standby mode with very low self-consumption, the inverter will then switch on regularly for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter switches on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eVE.Direct communication port that can be connected to:\u003cbr\/\u003e \u003cbr\/\u003e• Computers (VE.Direct to USB cable required)\u003cbr\/\u003e• Apple and Android smartphones, MacBooks and other devices (VE.Direct Bluetooth dongle required)\u003cbr\/\u003e \u003cbr\/\u003eFree software\u003cbr\/\u003eCurrent SW versions are available here https:\/\/www.victronenergy.com\/support-and-downloads\/software#victronconnect-app\u003cbr\/\u003e \u003cbr\/\u003eRemote on \/ off, LED diagnostics - see manual.\u003cbr\/\u003e \u003cbr\/\u003eCables for connection to the battery are not included, we will be happy to make the necessary lengths for you. So do not hesitate to contact us.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25 ° C (VA): 1200\u003cbr\/\u003eContinuous active power at 25 ° C \/ 40 ° C (W): 1000\/850\u003cbr\/\u003ePeak active power (W): 2200\u003cbr\/\u003eWeight (kg): 7.4\u003cbr\/\u003eDimensions h x w x d (mm): 117x232x327\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52541842915666,"sku":"04230482","price":6850.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230482_8890191f-4836-4f3a-ab0b-b723fba0fd89.png?v=1776146107"},{"product_id":"menic-napeti-victron-energy-1600va-12v-smart","title":"Voltage converter Victron Energy 1600VA 12V Smart","description":"New in the Victron Energy offer. Fully programmable sine wave inverter 12V\/1600VA with built-in Bluetooth, wireless settings and ECO mode.\u003cbr\/\u003e\u003cbr\/\u003eProven reliability of professional Victron Energy inverters \u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eThe power required to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e \u003cbr\/\u003eThe drive incorporates a robust toroidal transformer which has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003e \u003cbr\/\u003eThe inverters are short-circuit proof and protected against overheating, either due to overload or\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e\u003cbr\/\u003eBuilt-in Bluetooth technology and Victron Connect App\u003cbr\/\u003e \u003cbr\/\u003eThis inverter has built-in Bluetooth technology and is fully configurable via tablet or smartphone. This is a completely unique function and you can therefore set the parameters of the converter and monitor the operation simply wirelessly.\u003cbr\/\u003e \u003cbr\/\u003eSetting options:\u003cbr\/\u003e• Low battery voltage alarm\u003cbr\/\u003e• Setting the voltage level for switching off and restarting the inverter when the battery is discharged\u003cbr\/\u003e• Dynamic disconnection from the battery during discharge: the voltage level for disconnection is dependent on the size of the load\u003cbr\/\u003e• Output voltage: 210 - 245V\u003cbr\/\u003e• Frequency: 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode on \/ off and ECO shooting level\u003cbr\/\u003e• Alarm relay\u003cbr\/\u003e\u003cbr\/\u003eMonitoring:\u003cbr\/\u003e• Input and output voltage, load level and alarms\u003cbr\/\u003e \u003cbr\/\u003eDownload the application for free under the name VictronConnect app in the App Store or Google Play.\u003cbr\/\u003eThe application can be downloaded from this software page of the manufacturer Victron Energy:\u003cbr\/\u003e \u003cbr\/\u003eIf you prefer to set up and monitor via cable and PC, the inverter is equipped with a VE.Direct communication port that you can connect to using a VE.Direct to USB cable\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it goes to sleep and the inverter's own consumption is then only approx. 0.6W). In standby mode with very low self-consumption, the inverter will then switch on periodically for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter will turn on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eRemote on\/off\u003cbr\/\u003eA remote on\/off switch or relay contact can be connected to the two-pole connector.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25°C (VA): 1600\u003cbr\/\u003eContinuous active power at 25°C \/ 40°C (W): 1300\/1200\u003cbr\/\u003ePeak active power (W): 3000\u003cbr\/\u003eWeight (kg): 12\u003cbr\/\u003eDimensions hxwxd (mm): 485x219x125\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52541958521170,"sku":"04230537","price":14490.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230537_d0bebb98-4d9d-4b94-ae36-f543ac8413c9.png?v=1776147304"},{"product_id":"menic-napeti-victron-energy-2000va-12v-smart","title":"Voltage converter Victron Energy 2000VA 12V Smart","description":"Fully programmable sine wave inverter 12V\/2000VA with built-in Bluetooth, wireless settings and ECO mode.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003eHigh starting power\u003cbr\/\u003eThe power required to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003eThe drive incorporates a robust toroidal transformer which has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eThe inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.\u003cbr\/\u003e\u003cbr\/\u003eBuilt-in Bluetooth technology and Victron Connect App\u003cbr\/\u003eThis inverter has built-in Bluetooth technology and is fully configurable via tablet or smartphone. This is a completely unique function and you can therefore set the parameters of the converter and monitor the operation simply wirelessly.\u003cbr\/\u003e \u003cbr\/\u003eSetting options:\u003cbr\/\u003e• Low battery voltage alarm\u003cbr\/\u003e• Setting the voltage level for switching off and restarting the inverter when the battery is discharged\u003cbr\/\u003e• Dynamic disconnection from the battery during discharge: the voltage level for disconnection is dependent on the size of the load\u003cbr\/\u003e• Output voltage: 210 - 245V\u003cbr\/\u003e• Frequency: 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode on \/ off and ECO shooting level\u003cbr\/\u003e• Alarm relay\u003cbr\/\u003e \u003cbr\/\u003eMonitoring:\u003cbr\/\u003e• Input and output voltage, load level and alarms\u003cbr\/\u003e \u003cbr\/\u003eDownload the application for free under the name VictronConnect app in the App Store or Google Play.\u003cbr\/\u003eThe application can be downloaded from this software page of the manufacturer Victron Energy:\u003cbr\/\u003e \u003cbr\/\u003eIf you prefer to set up and monitor via cable and PC, the inverter is equipped with a VE.Direct communication port that you can connect to using a VE.Direct to USB cable\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it goes to sleep and the inverter's own consumption is then only approx. 0.6W). In standby mode with very low self-consumption, the inverter will then switch on periodically for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter will turn on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eRemote on\/off\u003cbr\/\u003eA remote on\/off switch or relay contact can be connected to the two-pole connector.\u003cbr\/\u003e \u003cbr\/\u003eCables for connecting to the battery are not included.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- continuous output power at 25°C (VA): 2000\u003cbr\/\u003e- continuous active power at 25 °C \/ 40 °C (W): 1600 \/ 1450\u003cbr\/\u003e- peak active power (W): 4000\u003cbr\/\u003e- weight (kg): 13\u003cbr\/\u003e- dimensions h x w x d (mm): 485 x 219 x 125\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below.","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52541958717778,"sku":"04230538","price":16490.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230538_57dc6d63-3604-4e8d-8129-137d13225234.png?v=1776147305"},{"product_id":"menic-napeti-victron-energy-375va-24v-ve-direct","title":"Voltage converter SINUS Victron Energy 375VA 24V VE.Direct","description":"The drive features a rugged toroidal transformer that has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eThe inverters are short - circuit proof and protected against overheating, whether due to overload or overload\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e \u003cbr\/\u003eThis inverter is fully configurable - it is a completely unique function, where you can set the following parameters using a PC:\u003cbr\/\u003e• Low and high battery alarm and reset level\u003cbr\/\u003e• Inverter shutdown level at low and high battery voltage and reset level\u003cbr\/\u003e• Output voltage 220\/230 \/ 240V\u003cbr\/\u003e• Frequency 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode enable \/ disable sensitivity setting (setting the level when the drive \"sleeps\" and when it \"wakes up\" again)\u003cbr\/\u003e \u003cbr\/\u003eMonitoring is also available:\u003cbr\/\u003e• input and output voltage and current, temperature, alarms\u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eNeeded to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it sleeps and the inverter's own consumption is then only about 1W). In standby mode with very low self-consumption, the inverter will then switch on regularly for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter switches on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eVE.Direct communication port that can be connected to:\u003cbr\/\u003e \u003cbr\/\u003e• Computers (VE.Direct to USB cable required)\u003cbr\/\u003e• Apple and Android smartphones, MacBooks and other devices (VE.Direct Bluetooth dongle required)\u003cbr\/\u003e \u003cbr\/\u003eFree software\u003cbr\/\u003eCurrent SW versions are available here https:\/\/www.victronenergy.com\/support-and-downloads\/software#victronconnect-app\u003cbr\/\u003e \u003cbr\/\u003eRemote on \/ off, LED diagnostics - see manual.\u003cbr\/\u003e \u003cbr\/\u003eCables for connection to the battery are not included, we will be happy to make the necessary lengths for you. So do not hesitate to contact us.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25 ° C (VA): 375\u003cbr\/\u003eContinuous active power at 25 ° C \/ 40 ° C (W): 300\/250\u003cbr\/\u003ePeak active power (W): 700\u003cbr\/\u003eWeight (kg): 3.0\u003cbr\/\u003eDimensions h x w x d (mm): 86x165x260\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52553895182674,"sku":"04230477","price":2990.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230477_8e262785-cc1c-4964-8712-39358113e18d.png?v=1776146103"},{"product_id":"menic-napeti-victron-energy-250va-12v-ve-direct","title":"Voltage converter Victron Energy 250VA 12V VE.Direct","description":"The drive features a rugged toroidal transformer that has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eThe inverters are short - circuit proof and protected against overheating, whether due to overload or overload\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e \u003cbr\/\u003eThis inverter is fully configurable - it is a completely unique function, where you can set the following parameters using a PC:\u003cbr\/\u003e• Low and high battery alarm and reset level\u003cbr\/\u003e• Inverter shutdown level at low and high battery voltage and reset level\u003cbr\/\u003e• Output voltage 220\/230 \/ 240V\u003cbr\/\u003e• Frequency 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode enable \/ disable sensitivity setting (setting the level when the drive \"sleeps\" and when it \"wakes up\" again)\u003cbr\/\u003e \u003cbr\/\u003eMonitoring is also available:\u003cbr\/\u003e• input and output voltage and current, temperature, alarms\u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eNeeded to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it sleeps and the inverter's own consumption is then only about 1W). In standby mode with very low self-consumption, the inverter will then switch on regularly for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter switches on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eVE.Direct communication port that can be connected to:\u003cbr\/\u003e \u003cbr\/\u003e• Computers (VE.Direct to USB cable required)\u003cbr\/\u003e• Apple and Android smartphones, MacBooks and other devices (VE.Direct Bluetooth dongle required)\u003cbr\/\u003e \u003cbr\/\u003eFree software\u003cbr\/\u003eCurrent SW versions are available on our software page\u003cbr\/\u003e \u003cbr\/\u003eRemote on \/ off, LED diagnostics - see manual.\u003cbr\/\u003e \u003cbr\/\u003eCables for connection to the battery are not included, we will be happy to make the necessary lengths for you. So do not hesitate to contact us.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25 ° C (VA): 250\u003cbr\/\u003eContinuous active power at 25 ° C \/ 40 ° C (W): 200\/150\u003cbr\/\u003ePeak active power (W): 350\u003cbr\/\u003eWeight (kg): 2.4\u003cbr\/\u003eDimensions h x w x d (mm): 86x165x260\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52553957343570,"sku":"04230474","price":2290.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230474_3d84db5e-9a2c-4aa5-b1fa-25c1982badb0.png?v=1776146100"},{"product_id":"menic-napeti-victron-energy-800va-12v-ve-direct","title":"Voltage converter Victron Energy 800VA 12V VE.Direct","description":"The drive features a rugged toroidal transformer that has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eThe inverters are short - circuit proof and protected against overheating, whether due to overload or overload\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e \u003cbr\/\u003eThis inverter is fully configurable - it is a completely unique function, where you can set the following parameters using a PC:\u003cbr\/\u003e• Low and high battery alarm and reset level\u003cbr\/\u003e• Inverter shutdown level at low and high battery voltage and reset level\u003cbr\/\u003e• Output voltage 220\/230 \/ 240V\u003cbr\/\u003e• Frequency 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode enable \/ disable sensitivity setting (setting the level when the drive \"sleeps\" and when it \"wakes up\" again)\u003cbr\/\u003e \u003cbr\/\u003eMonitoring is also available:\u003cbr\/\u003e• input and output voltage and current, temperature, alarms\u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eNeeded to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it sleeps and the inverter's own consumption is then only about 1W). In standby mode with very low self-consumption, the inverter will then switch on regularly for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter switches on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eVE.Direct communication port that can be connected to:\u003cbr\/\u003e \u003cbr\/\u003e• Computers (VE.Direct to USB cable required)\u003cbr\/\u003e• Apple and Android smartphones, MacBooks and other devices (VE.Direct Bluetooth dongle required)\u003cbr\/\u003e \u003cbr\/\u003eFree software\u003cbr\/\u003eCurrent SW versions are available here https:\/\/www.victronenergy.com\/support-and-downloads\/software#victronconnect-app\u003cbr\/\u003e \u003cbr\/\u003eRemote on \/ off, LED diagnostics - see manual.\u003cbr\/\u003e \u003cbr\/\u003eCables for connection to the battery are not included, we will be happy to make the necessary lengths for you. So do not hesitate to contact us.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25 ° C (VA): 800\u003cbr\/\u003eContinuous active power at 25 ° C \/ 40 ° C (W): 650\/560\u003cbr\/\u003ePeak active power (W): 1500\u003cbr\/\u003eWeight (kg): 5.5\u003cbr\/\u003eDimensions h x w x d (mm): 105x230x325\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52553957441874,"sku":"04230480","price":5890.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230480_488f2e92-9fe5-478f-86b7-c6aa4bcfcaa1.png?v=1776146105"},{"product_id":"menic-napeti-victron-energy-500va-24v-ve-direct","title":"Voltage converter Victron Energy 500VA 24V VE.Direct","description":"The drive features a rugged toroidal transformer that has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eThe inverters are short - circuit proof and protected against overheating, whether due to overload or overload\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e \u003cbr\/\u003eThis inverter is fully configurable - it is a completely unique function, where you can set the following parameters using a PC:\u003cbr\/\u003e• Low and high battery alarm and reset level\u003cbr\/\u003e• Inverter shutdown level at low and high battery voltage and reset level\u003cbr\/\u003e• Output voltage 220\/230 \/ 240V\u003cbr\/\u003e• Frequency 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode enable \/ disable sensitivity setting (setting the level when the drive \"sleeps\" and when it \"wakes up\" again)\u003cbr\/\u003e \u003cbr\/\u003eMonitoring is also available:\u003cbr\/\u003e• input and output voltage and current, temperature, alarms\u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eNeeded to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it sleeps and the inverter's own consumption is then only about 1W). In standby mode with very low self-consumption, the inverter will then switch on regularly for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter switches on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eVE.Direct communication port that can be connected to:\u003cbr\/\u003e \u003cbr\/\u003e• Computers (VE.Direct to USB cable required)\u003cbr\/\u003e• Apple and Android smartphones, MacBooks and other devices (VE.Direct Bluetooth dongle required)\u003cbr\/\u003e \u003cbr\/\u003eFree software\u003cbr\/\u003eCurrent SW versions are available here https:\/\/www.victronenergy.com\/support-and-downloads\/software#victronconnect-app\u003cbr\/\u003e \u003cbr\/\u003eRemote on \/ off, LED diagnostics - see manual.\u003cbr\/\u003e \u003cbr\/\u003eCables for connection to the battery are not included, we will be happy to make the necessary lengths for you. So do not hesitate to contact us.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25 ° C (VA): 500\u003cbr\/\u003eContinuous active power at 25 ° C \/ 40 ° C (W): 400\/350\u003cbr\/\u003ePeak active power (W): 900\u003cbr\/\u003eWeight (kg): 3.9\u003cbr\/\u003eDimensions h x w x d (mm): 86x172x275\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52554035298642,"sku":"04230479","price":4190.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230479_f71d8078-2a21-4c52-8b5e-6035631708e5.png?v=1776146105"},{"product_id":"menic-napeti-victron-energy-375va-12v-ve-direct","title":"Voltage converter Victron Energy 375VA 12V VE.Direct","description":"The drive features a rugged toroidal transformer that has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eThe inverters are short - circuit proof and protected against overheating, whether due to overload or overload\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e \u003cbr\/\u003eThis inverter is fully configurable - it is a completely unique function, where you can set the following parameters using a PC:\u003cbr\/\u003e• Low and high battery alarm and reset level\u003cbr\/\u003e• Inverter shutdown level at low and high battery voltage and reset level\u003cbr\/\u003e• Output voltage 220\/230 \/ 240V\u003cbr\/\u003e• Frequency 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode enable \/ disable sensitivity setting (setting the level when the drive \"sleeps\" and when it \"wakes up\" again)\u003cbr\/\u003e \u003cbr\/\u003eMonitoring is also available:\u003cbr\/\u003e• input and output voltage and current, temperature, alarms\u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eNeeded to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it sleeps and the inverter's own consumption is then only about 1W). In standby mode with very low self-consumption, the inverter will then switch on regularly for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter switches on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eVE.Direct communication port that can be connected to:\u003cbr\/\u003e \u003cbr\/\u003e• Computers (VE.Direct to USB cable required)\u003cbr\/\u003e• Apple and Android smartphones, MacBooks and other devices (VE.Direct Bluetooth dongle required)\u003cbr\/\u003e \u003cbr\/\u003eFree software\u003cbr\/\u003eCurrent SW versions are available on our software page\u003cbr\/\u003e \u003cbr\/\u003eRemote on \/ off, LED diagnostics - see manual.\u003cbr\/\u003e \u003cbr\/\u003eCables for connection to the battery are not included, we will be happy to make the necessary lengths for you. So do not hesitate to contact us.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25 ° C (VA): 375\u003cbr\/\u003eContinuous active power at 25 ° C \/ 40 ° C (W): 300\/250\u003cbr\/\u003ePeak active power (W): 700\u003cbr\/\u003eWeight (kg): 3.0\u003cbr\/\u003eDimensions h x w x d (mm): 86x165x260\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52554434249042,"sku":"04230475","price":2790.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230475_926f9754-4f85-49b8-860d-63b69b1f7139.png?v=1776146101"},{"product_id":"menic-napeti-victron-energy-500va-12v-ve-direct","title":"Voltage converter Victron Energy 500VA 12V VE.Direct","description":"The drive features a rugged toroidal transformer that has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eThe inverters are short - circuit proof and protected against overheating, whether due to overload or overload\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e \u003cbr\/\u003eThis inverter is fully configurable - it is a completely unique function, where you can set the following parameters using a PC:\u003cbr\/\u003e• Low and high battery alarm and reset level\u003cbr\/\u003e• Inverter shutdown level at low and high battery voltage and reset level\u003cbr\/\u003e• Output voltage 220\/230 \/ 240V\u003cbr\/\u003e• Frequency 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode enable \/ disable sensitivity setting (setting the level when the drive \"sleeps\" and when it \"wakes up\" again)\u003cbr\/\u003e \u003cbr\/\u003eMonitoring is also available:\u003cbr\/\u003e• input and output voltage and current, temperature, alarms\u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eNeeded to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it sleeps and the inverter's own consumption is then only about 1W). In standby mode with very low self-consumption, the inverter will then switch on regularly for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter switches on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eVE.Direct communication port that can be connected to:\u003cbr\/\u003e \u003cbr\/\u003e• Computers (VE.Direct to USB cable required)\u003cbr\/\u003e• Apple and Android smartphones, MacBooks and other devices (VE.Direct Bluetooth dongle required)\u003cbr\/\u003e \u003cbr\/\u003eFree software\u003cbr\/\u003eCurrent SW versions are available here https:\/\/www.victronenergy.com\/support-and-downloads\/software#victronconnect-app\u003cbr\/\u003e \u003cbr\/\u003eRemote on \/ off, LED diagnostics - see manual.\u003cbr\/\u003e \u003cbr\/\u003eCables for connection to the battery are not included, we will be happy to make the necessary lengths for you. So do not hesitate to contact us.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25 ° C (VA): 500\u003cbr\/\u003eContinuous active power at 25 ° C \/ 40 ° C (W): 400\/350\u003cbr\/\u003ePeak active power (W): 900\u003cbr\/\u003eWeight (kg): 3.9\u003cbr\/\u003eDimensions h x w x d (mm): 86x172x275\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52554842243410,"sku":"04230478","price":3499.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230478_29b078c7-810a-4e43-a29d-472b5013ed09.png?v=1776146104"},{"product_id":"menic-napeti-victron-energy-250va-24v-ve-direct","title":"Voltage converter Victron Energy 250VA 24V VE.Direct","description":"The drive features a rugged toroidal transformer that has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eThe inverters are short - circuit proof and protected against overheating, whether due to overload or overload\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e \u003cbr\/\u003eThis inverter is fully configurable - it is a completely unique function, where you can set the following parameters using a PC:\u003cbr\/\u003e• Low and high battery alarm and reset level\u003cbr\/\u003e• Inverter shutdown level at low and high battery voltage and reset level\u003cbr\/\u003e• Output voltage 220\/230 \/ 240V\u003cbr\/\u003e• Frequency 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode enable \/ disable sensitivity setting (setting the level when the drive \"sleeps\" and when it \"wakes up\" again)\u003cbr\/\u003e \u003cbr\/\u003eMonitoring is also available:\u003cbr\/\u003e• input and output voltage and current, temperature, alarms\u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eNeeded to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it sleeps and the inverter's own consumption is then only about 1W). In standby mode with very low self-consumption, the inverter will then switch on regularly for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter switches on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eVE.Direct communication port that can be connected to:\u003cbr\/\u003e \u003cbr\/\u003e• Computers (VE.Direct to USB cable required)\u003cbr\/\u003e• Apple and Android smartphones, MacBooks and other devices (VE.Direct Bluetooth dongle required)\u003cbr\/\u003e \u003cbr\/\u003eFree software\u003cbr\/\u003eCurrent SW versions are available here https:\/\/www.victronenergy.com\/support-and-downloads\/software#victronconnect-app\u003cbr\/\u003e \u003cbr\/\u003eRemote on \/ off, LED diagnostics - see manual.\u003cbr\/\u003e \u003cbr\/\u003eCables for connection to the battery are not included, we will be happy to make the necessary lengths for you. So do not hesitate to contact us.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25 ° C (VA): 250\u003cbr\/\u003eContinuous active power at 25 ° C \/ 40 ° C (W): 200\/150\u003cbr\/\u003ePeak active power (W): 350\u003cbr\/\u003eWeight (kg): 2.4\u003cbr\/\u003eDimensions h x w x d (mm): 86x165x260\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52555111596370,"sku":"04230476","price":2390.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230476_c031b23a-5099-4922-9db0-8bc3b71f9994.png?v=1776146102"},{"product_id":"menic-napeti-sinus-victron-energy-ve-direct-500va-48v","title":"Voltage converter SINUS Victron Energy VE.Direct 500VA 48V","description":"Professional programmable voltage converter 48V\/500VA with toroidal transformer, with ECO mode and VE.Direct interface. \u003cbr\/\u003e\u003cbr\/\u003eThe drive incorporates a robust toroidal transformer which has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eInverters are short-circuit proof and protected against overheating, either due to overload or\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e \u003cbr\/\u003eThis converter is fully configurable - this is a completely unique function, where you can set the following parameters using a PC:\u003cbr\/\u003e• low and high battery voltage alarm and reset level\u003cbr\/\u003e• inverter shutdown level at low and high battery voltage and reset level\u003cbr\/\u003e• Output voltage 220\/230\/240V\u003cbr\/\u003e• Frequency 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode on \/ off sensitivity settings (setting the level when the inverter \"sleeps\" and when it \"wakes up\" again)\u003cbr\/\u003e \u003cbr\/\u003eMonitoring is also available:\u003cbr\/\u003e• input and output voltage and current, temperature, alarms\u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eNeeded to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e\u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load input drops below the preset value, the inverter switches to standby mode (it goes to sleep and the inverter's own consumption is then only approx. 1W). In standby mode with very low self-consumption, the inverter will then switch on periodically for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter will turn on again. Thanks to this function, you will save a large amount of energy that the inverter would otherwise have used for its operation.\u003cbr\/\u003e \u003cbr\/\u003eVE.Direct communication port that can be connected to:\u003cbr\/\u003e \u003cbr\/\u003e• Computers (VE.Direct to USB cable required)\u003cbr\/\u003e• Apple and Android smartphones, MacBook tablets and other devices (necessary VE.Direct Bluetooth dongle)\u003cbr\/\u003e \u003cbr\/\u003eFree software\u003cbr\/\u003eCurrent SW versions are available on our software page\u003cbr\/\u003e \u003cbr\/\u003eRemote on\/off, LED diagnostics - see manual.\u003cbr\/\u003e \u003cbr\/\u003eCables for connecting to the battery are not included, we will be happy to advise you on the design of a suitable cable cross-section. So don't hesitate to contact us.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25°C (VA): 500\u003cbr\/\u003eContinuous active power at 25°C \/ 40°C (W): 400\/350\u003cbr\/\u003ePeak active power (W): 900\u003cbr\/\u003eWeight (kg): 3.9\u003cbr\/\u003eDimensions h x w x d (mm): 86x172x275\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52556545163602,"sku":"04230543","price":3699.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230543_73e48501-45f8-4dff-8b10-00cf23257c30.png?v=1776147311"},{"product_id":"menic-napeti-smart-victron-energy-2000va-48v","title":"Voltage converter Smart Victron Energy 2000VA 48V","description":"The converter contains a robust toroidal transformer that has demonstrated its reliability in Victron Energy's transducers for many years. The transducers are short-resistant and protected against overheating, whether due to overload or high ambient temperatures. This changer has built-in Bluetooth technology and is fully configurable with a tablet or smartphone. This is a completely unique function and therefore you have the ability to set the parameters of the changer and monitor the operation simply wirelessly. It provides the performance needed to run loads such as power changers for LED lamps, halide lamps or power tools.\u003cbr\/\u003e\u003cbr\/\u003eSettings options: \u003cbr\/\u003e- low voltage battery alarm \u003cbr\/\u003e- voltage level setting for switching off and restarting the inverter when the battery is low \u003cbr\/\u003e- dynamic disconnection from the battery when discharged: voltage level for disconnection is dependent on the load size \u003cbr\/\u003e- output voltage: 210 - 245V \u003cbr\/\u003e- frequency: 50 Hz or 60 Hz \u003cbr\/\u003e- ECO on\/off mode and ECO sensing level \u003cbr\/\u003e- alarm relays \u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters: \u003cbr\/\u003e- sustained output power at 25°C (VA): 2000 \u003cbr\/\u003e- continuous active power at 25 °C \/ 40 °C (W):1600\/1450 \u003cbr\/\u003e- peak active power (W): 4000 \u003cbr\/\u003e- weight (kg): 13 \u003cbr\/\u003e- dimensions in x w x h (mm): 485 x 219 x 125\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52556545327442,"sku":"04230546","price":12690.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230546_f19d6747-2689-4b7a-92da-52580cfb34a2.png?v=1776147311"},{"product_id":"menic-napeti-victron-energy-3000va-12v-smart","title":"Voltage converter Smart Victron Energy 3000VA 12V Smart","description":"Sinus plne programovateľný 12V\/3000VA prevodník so zabudovaným Bluetooth, bezdrôtové nastavenia a ekologický režim.\u003cbr\/\u003e\u003cbr\/\u003e- Vysoký počiatočný výkon:\u003cbr\/\u003eSila potrebná na spustenie záťaže, ako sú LED žiarovky, halogénové žiarovky alebo elektrické náradie. Invertor obsahuje robustný toroidný transformátor, ktorý už mnoho rokov preukázal svoju spoľahlivosť vo Victron Energy. Invertory sú odolné voči krátkym obvodom a chránené prehrievaním, buď v dôsledku preťaženia alebo vysokých okolitých teplôt.\u003cbr\/\u003e\u003cbr\/\u003e- Vstavaná technológia Bluetooth a Victron Connect:\u003cbr\/\u003eTento prevodník má postavenú technológiu Bluetooth a je plne konfigurovateľná pomocou tabletu alebo smartfónu. Toto je jedinečná funkcia a máte možnosť nastaviť parametre meniča a monitorovať operáciu jednoducho bezdrôtovo.\u003cbr\/\u003e \u003cbr\/\u003eMožnosti nastavenia:\u003cbr\/\u003eAlarm s nízkym napätím batérie\u003cbr\/\u003eNastavenie úrovne napätia na vypnutie a reštartovanie meniča pri vypustení batérie\u003cbr\/\u003eDynamické odpojenie od batérie pri výbore: úroveň napätia pre odpojenie závisí od veľkosti záťaže\u003cbr\/\u003eVýstupné napätie: 210 - 245V\u003cbr\/\u003eFrekvencia: 50 Hz alebo 60 Hz\u003cbr\/\u003eECO režim zapnuté \/ vypnuté a úroveň snímania ECO\u003cbr\/\u003eRelé alarmu\u003cbr\/\u003e \u003cbr\/\u003e- Monitorovanie:\u003cbr\/\u003eVstupné a výstupné napätie, úroveň zaťaženia a alarmy\u003cbr\/\u003e \u003cbr\/\u003eStiahnite si aplikáciu zadarmo pod názvom VictronConnect App v App Store alebo Google Play.\u003cbr\/\u003eAplikáciu je možné stiahnuť na tejto softvérovej stránke Victron Energy.\u003cbr\/\u003eAk uprednostňujete nastavenia a monitorovanie pomocou kábla a PC, menič je vybavený komunikačným portom V.Direct, ku ktorému sa môžete pripojiť pomocou kábla v.direct k USB\u003cbr\/\u003e \u003cbr\/\u003e- Eco režim:\u003cbr\/\u003eV režime ECO - Keď spotreba energie klesne pod predvolenú hodnotu, menič prepne do pohotovostného režimu (je spánkom a spotreba konvertora je potom iba asi 0,6 W). V pohotovostnom režime s veľmi nízkou spotrebou bude menič pravidelne prepínaný na krátky čas (nastaviteľný parameter, štandard: každých 2,5 sekundy). Ak napájanie zaťaženia prekročí vopred určenú hodnotu, menič sa znova zapne. Vďaka tejto funkcii ušetríte veľké množstvo energie, ktorú by menič inak spotreboval na svoju prevádzku.\u003cbr\/\u003e \u003cbr\/\u003e- diaľkové zapnutie \/ vypnutie:\u003cbr\/\u003eDiaľkový spínač zapnutí \/ vypnutia alebo relé je možné pripojiť k konektoru dvojpolu.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnické parametre :\u003cbr\/\u003e- trvalý výstupný výkon pri 25 ° C (VA): 3000\u003cbr\/\u003e- trvalý aktívny výkon pri 25 ° C \/ 40 ° C (W): 2400\/2200\u003cbr\/\u003e- Najvyšší aktívny výkon (W): 6000\u003cbr\/\u003e- Hmotnosť (kg): 19\u003cbr\/\u003e- Rozmery v x w x h (mm): 533 x 285 x 150","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52557099073874,"sku":"04230600","price":22390.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230600_fa1124a4-c51d-49be-b26d-d58e8be3b5e7.png?v=1776147546"},{"product_id":"menic-napeti-sinus-victron-energy-ve-direct-800va-48v-zanovni","title":"Měnič napětí SINUS Victron Energy VE.Direct  800VA 48V. - zánovní","description":"Profesionální programovatelný měnič napětí 48V\/800VA s toroidním transformátorem, s ECO módem a rozhraním VE.Direct. \u003cbr\u003e\u003cbr\u003eOsvědčená spolehlivost profesionálních měničů Victron Energy s plnou zárukou na 5 let.\u003cbr\u003e \u003cbr\u003eMěnič obsahuje robustní toroidní transformátor, který prokazuje svou spolehlivost v měničích Victron Energy již po mnoho let.\u003cbr\u003eMěniče jsou odolné proti zkratu a chráněný proti přehřátí, ať už v důsledku přetížení nebo\u003cbr\u003evysoké teploty okolí.\u003cbr\u003e \u003cbr\u003eTento měnič je plně konfigurovatelný – jedná se zcela unikátní funkci, kdy máte možnost nastavit si pomocí PC následující parametry:\u003cbr\u003e• alarm nízkého a vysokého napětí baterie a resetovací úroveň\u003cbr\u003e• úroveň vypnutí měniče při nízkém a vysokém napětí baterie a resetovací úroveň\u003cbr\u003e• Výstupní napětí 220\/230\/240V\u003cbr\u003e• Frekvence 50 Hz nebo 60 Hz\u003cbr\u003e• Režim ECO zapnutí \/ vypnutí nastavení citlivosti ( nastavení úrovně kdy se měnič „uspí“ a kdy se opět „probudí“)\u003cbr\u003e \u003cbr\u003eK dispozici je také monitoring:\u003cbr\u003e• vstupní a výstupní napětí a proud, teplota, alarmy\u003cbr\u003e \u003cbr\u003eVysoký startovací výkon\u003cbr\u003ePotřebný ke spuštění zátěží, jako jsou výkonové měniče pro LED lampy, halogenové lampy nebo elektrické nářadí.\u003cbr\u003e \u003cbr\u003eRežim ECO\u003cbr\u003eV režimu ECO - když příkon zátěže klesne pod přednastavenou hodnotu měnič se přepne do pohotovostního režimu (uspí se a vlastní spotřeba měniče je pak pouze cca 1W). V pohotovostním režimu s velmi nízkou vlastní spotřebou se pak bude měnič pravidelně na krátkou dobu zapínat (nastavitelný parametr, standardně: každý 2,5 sekundy). Pokud příkon zátěže překročí předem nastavenou hodnotu, měnič se opět zapne. Díky této funkci ušetříte velké množství energie, kterou jinak měnič spotřeboval pro svůj provoz.\u003cbr\u003e \u003cbr\u003eVE.Direct komunikační port, který může být připojen k:\u003cbr\u003e \u003cbr\u003e• Počítači (nutný kabel VE.Direct to USB)\u003cbr\u003e• Smartphony Apple a Android, tablety MacBooky a jiná zařízení ( nutný VE.Direct Bluetooth dongle)\u003cbr\u003e \u003cbr\u003eSoftware zdarma\u003cbr\u003eAktuální verze SW jsou k dispozici na naší softwarové stránce\u003cbr\u003e \u003cbr\u003eVzdálené zapnutí \/ vypnutí, LED diagnostika – viz manuál.\u003cbr\u003e \u003cbr\u003eKabely pro připojení k baterii nejsou součástí, rádi Vám poradíme s návrhem vhodného průřezu kabelů. Neváhejte nás proto kontaktovat.\u003cbr\u003e\u003cbr\u003eTechnické parametry:  \u003cbr\u003eTrvalý výst. výkon při 25°C (VA): 800\u003cbr\u003eTrvalý činný výkon při 25°C \/ 40°C (W):650\/560\u003cbr\u003eŠpičkový činný výkon (W): 1500\u003cbr\u003eHmotnost (kg): 5,5\u003cbr\u003eRozměry v x š x h (mm):105x216x305\u003cbr\u003e\u003cbr\u003eTechnické specifikace naleznete níže v dokumentech ke stažení","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":53159140458834,"sku":"90329645","price":3969.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/90329645.png?v=1776149783"},{"product_id":"menic-napeti-sinus-victron-energy-ve-direct-800va-24v","title":"Voltage converter SINUS Victron Energy VE.Direct 800VA 24V","description":"The drive features a rugged toroidal transformer that has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eThe inverters are short - circuit proof and protected against overheating, whether due to overload or overload\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e \u003cbr\/\u003eThis inverter is fully configurable - it is a completely unique function, where you can set the following parameters using a PC:\u003cbr\/\u003e• Low and high battery alarm and reset level\u003cbr\/\u003e• Inverter shutdown level at low and high battery voltage and reset level\u003cbr\/\u003e• Output voltage 220\/230 \/ 240V\u003cbr\/\u003e• Frequency 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode enable \/ disable sensitivity setting (setting the level when the drive \"sleeps\" and when it \"wakes up\" again)\u003cbr\/\u003e \u003cbr\/\u003eMonitoring is also available:\u003cbr\/\u003e• input and output voltage and current, temperature, alarms\u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eNeeded to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it sleeps and the inverter's own consumption is then only about 1W). In standby mode with very low self-consumption, the inverter will then switch on regularly for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter switches on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eVE.Direct communication port that can be connected to:\u003cbr\/\u003e \u003cbr\/\u003e• Computers (VE.Direct to USB cable required)\u003cbr\/\u003e• Apple and Android smartphones, MacBooks and other devices (VE.Direct Bluetooth dongle required)\u003cbr\/\u003e \u003cbr\/\u003eFree software\u003cbr\/\u003eCurrent SW versions are available on our software page\u003cbr\/\u003e \u003cbr\/\u003eRemote on \/ off, LED diagnostics - see manual.\u003cbr\/\u003e \u003cbr\/\u003eCables for connection to the battery are not included, we will be happy to make the necessary lengths for you. So do not hesitate to contact us.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25 ° C (VA): 800\u003cbr\/\u003eContinuous active power at 25 ° C \/ 40 ° C (W): 650\/560\u003cbr\/\u003ePeak active power (W): 1500\u003cbr\/\u003eWeight (kg): 5.5\u003cbr\/\u003eDimensions h x w x d (mm): 105x216x305\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":53159180730706,"sku":"04230481","price":6290.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230481.png?v=1776146106"},{"product_id":"menic-napeti-victron-energy-1200va-24v-ve-direct","title":"Voltage converter Victron Energy 1200VA 24V VE.Direct","description":"Victron Energy 24V\/1200VA VE.Direct. Fully programmable 24V\/1200VA pure sine wave inverter with toroidal transformer, built-in VE.Direct interface and ECO mode.\u003cbr\/\u003eThe Victron Energy voltage converter is an efficient and reliable voltage converter built on a proven and field-tested platform. The inverter incorporates a robust toroidal transformer that has proven its reliability in Victron Energy inverters for many years.\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- Easily accessible terminals: installation is easier than ever because terminals are now more accessible to the installer.\u003cbr\/\u003e\u003cbr\/\u003eVE.Direct:\u003cbr\/\u003e\u003cbr\/\u003eThe VE.Direct port can be connected to:\u003cbr\/\u003e- computer (VE.Direct to USB interface cable required)\u003cbr\/\u003e- Smartphones, tablets, MacBooks and other Apple and Android devices (VE.Direct Bluetooth Smart dongle required)\u003cbr\/\u003e\u003cbr\/\u003eFully configurable:\u003cbr\/\u003e- Low battery alarm triggering and level reset\u003cbr\/\u003e- Low battery shutdown and restart levels\u003cbr\/\u003e- Dynamic shutdown: load-dependent shutdown level\u003cbr\/\u003e- output voltage 210 - 245 V\u003cbr\/\u003e- frequency 50 Hz or 60 Hz\u003cbr\/\u003e- ECO mode on\/off and ECO mode sensing level\u003cbr\/\u003e\u003cbr\/\u003eTracking:\u003cbr\/\u003e- Input and output voltages, % load and alarms\u003cbr\/\u003e\u003cbr\/\u003eProven reliability:\u003cbr\/\u003e- Full bridge and toroidal transformer topology has proven its reliability over many years. The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.\u003cbr\/\u003e\u003cbr\/\u003eHigh starting performance:\u003cbr\/\u003e- Required to start loads such as inverters for LED bulbs, halogen bulbs, refrigerators or power tools.\u003cbr\/\u003e\u003cbr\/\u003eECO mode:\u003cbr\/\u003eIn ECO mode, the inverter switches to standby mode when the load drops below a preset value. In standby mode, the inverter turns on for a short period of time every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.\u003cbr\/\u003e\u003cbr\/\u003eRemote on\/off:\u003cbr\/\u003eThe remote switch can be connected to the two-pole connector or between the battery plus and left contact of the two-pole connector.\u003cbr\/\u003e\u003cbr\/\u003eLED diagnostics:\u003cbr\/\u003eThe status LEDs can be used to diagnose the device, see instructions for use.\u003cbr\/\u003e\u003cbr\/\u003eVictron Connect:\u003cbr\/\u003eThe VictronConnect application is used to monitor, control and configure the inverter. The app can be installed on a phone, tablet or computer. The app is available for Android, iOS, Windows and macOS. The app communicates either via Bluetooth or via a USB interface with the VE.Direct port.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- 230 V AC +\/- 3% 50 Hz or 60 Hz +\/- 0.1%.\u003cbr\/\u003e- continuous power at 25 oC: 1200 VA \/ 1000 W\u003cbr\/\u003e- Peak power: 2200 W\u003cbr\/\u003e- max. efficiency: 91%\u003cbr\/\u003e- self-consumption at zero load: max 8 W\u003cbr\/\u003e- self-consumption in ECO mode: max 1.5 W\u003cbr\/\u003e- 230 V AC connection: Schuko (CEE 7\/4)\u003cbr\/\u003e- Operating temperature range: -40 to +65oC (fan-assisted cooling)\u003cbr\/\u003e- Humidity (non-condensing): max. 95%\u003cbr\/\u003e- Protection class: IP21\u003cbr\/\u003e- weight: 7.4 kg\u003cbr\/\u003e- Dimension: 117 x 232 x 327 mm\u003cbr\/\u003e\u003cbr\/\u003e","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":53159180763474,"sku":"04230483","price":7890.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230483_6a44892b-6282-4cbd-91a9-cf77480cdc98.png?v=1776933984"},{"product_id":"menic-napeti-victron-energy-1600va-24v-smart","title":"Victron Energy 1600VA 24V Smart Voltage Converter","description":"The converter contains a robust toroidal transformer that has demonstrated its reliability in Victron Energy's transducers for many years. The transducers are short-resistant and protected against overheating, whether due to overload or high ambient temperatures. This changer has built-in Bluetooth technology and is fully configurable with a tablet or smartphone. This is a completely unique function and therefore you have the ability to set the parameters of the changer and monitor the operation simply wirelessly. It provides the performance needed to run loads such as power changers for LED lamps, halide lamps or power tools.\u003cbr\/\u003e\u003cbr\/\u003eSettings options: \u003cbr\/\u003e- low voltage battery alarm \u003cbr\/\u003e- voltage level setting for switching off and restarting the inverter when the battery is low \u003cbr\/\u003e- dynamic disconnection from the battery when discharged: voltage level for disconnection is dependent on the load size \u003cbr\/\u003e- output voltage: 210 - 245V \u003cbr\/\u003e- frequency: 50 Hz or 60 Hz \u003cbr\/\u003e- ECO on\/off mode and ECO sensing level \u003cbr\/\u003e- alarm relays \u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters: \u003cbr\/\u003e- sustained output power at 25°C (VA): 1600 \u003cbr\/\u003e- continuous active power at 25 °C \/ 40 °C (W):1300\/1200\u003cbr\/\u003e- peak active power (W): 3000 \u003cbr\/\u003e- weight (kg): 12 \u003cbr\/\u003e- dimensions in x w x h (mm): 485 x 219 x 125\u003cbr\/\u003e\u003cbr\/\u003e","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":53159211630930,"sku":"04230539","price":14590.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230539_fe8a9ac8-52da-4876-85fc-9f09fe652301.png?v=1776147306"},{"product_id":"menic-napeti-victron-energy-2000va-24v-smart","title":"Victron Energy 2000VA 24V Smart Voltage Converter","description":"Měnič Victron Energy 24V\/2000VA Smart\u003cbr\u003ePlně programovatelný měnič napětí 24 V\/2000 VA s čistou sinusoidou, vestavěným Bluetooth Smart, možností bezdrátového nastavení a ECO módem.\u003cbr\u003eMěnič napětí Victron Energy Smart je účinný a spolehlivý měnič napětí postaven na osvědčené a v praxi otestované platformě měniče, ale v novém designu s celokovovým krytem. Je dostatečně výkonný pro napájení většiny běžných spotřebičů v automobilu, lodi, karavanu nebo domácnosti. Toroidní transformátor poskytuje vysokou špičkovou výkonovou rázovou kapacitu, stabilní napětí, frekvenci a vysoce kvalitní sinusový průběh.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eParametry produktu: \u003cbr\u003e\u003cbr\u003eLehce dostupné terminály: \u003cbr\u003eInstalace je jednodušší než kdykoli předtím, protože terminály jsou nyní pro instalačního technika dostupnější.\u003cbr\u003e\u003cbr\u003eVestavěné Bluetooth:\u003cbr\u003ePlně konfigurovatelné pomocí tabletu nebo smartphonu, nakonfigurujte alarmy, alarmové relé, přerušení napětí, výstupní napětí, frekvenci, ekologický režim a další přímo z aplikace z VictronConnect.\u003cbr\u003e- alarm nízkého napětí baterie\u003cbr\u003e- úrovně vypnutí a restartu při nízkém napětí baterie\u003cbr\u003e- dynamické vypínání: úroveň vypínání závislá na zatížení\u003cbr\u003e- výstupní napětí: 230 VAC ±2 %\u003cbr\u003e- frekvence: 50 Hz nebo 60 Hz\u003cbr\u003e- zapnutí\/vypnutí režimu ECO a úroveň snímání režimu ECO\u003cbr\u003e- alarmové relé\u003cbr\u003e- sledování: vstupní a výstupní napětí, zátěž a alarmy\u003cbr\u003e\u003cbr\u003eVE.Direct:\u003cbr\u003ePomocí portu VE.Direct lze připojit k počítači (je potřeba kabel rozhraní VE.Direct to USB) a nakonfigurovat a sledovat stejné parametry.\u003cbr\u003e\u003cbr\u003eOsvědčená spolehlivost:\u003cbr\u003eTopologie plného můstku a toroidního transformátoru prokázala svou spolehlivost po mnoho let. Střídače jsou odolné proti zkratu a chráněny proti přehřátí, ať už v důsledku přetížení nebo vysoké teploty okolí.\u003cbr\u003e\u003cbr\u003eVysoký startovací výkon:\u003cbr\u003ePotřebný ke spuštění zátěží, jako jsou měniče pro LED žárovky, halogenové žárovky, lednice nebo elektrické nářadí.\u003cbr\u003e\u003cbr\u003eECO režim:\u003cbr\u003eV režimu ECO se střídač přepne do pohotovostního režimu, když zatížení klesne pod přednastavenou hodnotu. V pohotovostním režimu se střídač na krátkou dobu zapne každých 2,5 sekundy (nastavitelné). Pokud zátěž překročí přednastavenou úroveň, střídač zůstane zapnutý.\u003cbr\u003e\u003cbr\u003eDálkové zapnutí\/vypnutí:\u003cbr\u003eDálkový vypínač nebo relé kontakt lze připojit ke dvoupólovému konektoru. Alternativně lze svorku H (vlevo) dvoupólového konektoru přepnout na baterii plus nebo L svorku (vpravo) dvoupólového konektoru lze přepnout na mínus baterie.\u003cbr\u003e\u003cbr\u003eLED diagnostika:\u003cbr\u003eStavové diody lze využít k diagnostice zařízení, viz. návod k použití.\u003cbr\u003e\u003cbr\u003eVictron Connect:\u003cbr\u003eAplikace VictronConnect se používá k monitorování, ovládání a konfiguraci měniče. Aplikaci lze nainstalovat do telefonu, tabletu nebo počítače. Aplikace je dostupná pro Android, iOS, Windows a macOS. Aplikace komunikuje buď přes Bluetooth, nebo přes USB rozhraní s portem VE.Direct. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eTechnické parametry:\u003cbr\u003e\u003cbr\u003e- výstupní napětí: 230 V AC ± 2 % 50 Hz nebo 60 Hz ± 0,1 % \u003cbr\u003e- trvalý výkon při 25 oC: 2000 VA \/ 1600 W\u003cbr\u003e- špičkový výkon: 4000 W\u003cbr\u003e- max. účinnost: 94 %\u003cbr\u003e- vlastní spotřeba při nulovém zatížení: max. 9 W\u003cbr\u003e- vlastní spotřeba při nulovém zatížení v režimu ECO: max. 1,3 W\u003cbr\u003e- připojení 230 V AC: šroubové svorky\u003cbr\u003e- rozpětí provozních teplot: -40 až +65oC (ventilátorem podporované chlazení)\u003cbr\u003e- vlhkost (nekondenzující): max. 95%\u003cbr\u003e- třída ochrany: IP21\u003cbr\u003e- hmotnost: 13 kg\u003cbr\u003e- rozměr: 485 x 219 x 125 mm","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":53159211729234,"sku":"04230540","price":16900.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230540_07ad9d84-9522-4130-b72a-cfaafbfa0965.png?v=1776147307"},{"product_id":"menic-napeti-victron-energy-3000va-24v-smart","title":"Victron Energy 3000VA 24V Smart voltage converter","description":"Victron Energy 24V\/2000VA Smart inverter\u003cbr\/\u003eFully programmable 24V\/2000VA inverter with pure sine wave, built-in Bluetooth Smart, wireless setup and ECO mode.\u003cbr\/\u003eThe Victron Energy Smart voltage converter is an efficient and reliable voltage converter built on a proven and field-tested inverter platform, but in a new design with an all-metal housing. It is powerful enough to power most common appliances in a car, boat, RV or home. The toroidal transformer provides high peak power surge capacity, stable voltage, frequency and high quality sine wave.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct Parameters:\u003cbr\/\u003e\u003cbr\/\u003eEasily accessible terminals:\u003cbr\/\u003eInstallation is easier than ever because the terminals are now more accessible to the installer.\u003cbr\/\u003e\u003cbr\/\u003eBuilt-in Bluetooth:\u003cbr\/\u003eFully configurable via tablet or smartphone, configure alarms, alarm relays, voltage interrupts, output voltage, frequency, eco-mode and more directly from the app from VictronConnect.\u003cbr\/\u003e- Low battery voltage alarm\u003cbr\/\u003e- Low battery shutdown and restart levels\u003cbr\/\u003e- Dynamic shutdown: load-dependent shutdown level\u003cbr\/\u003e- output voltage: 230 VAC ±2%\u003cbr\/\u003e- Frequency: 50 Hz or 60 Hz\u003cbr\/\u003e- ECO mode on\/off and ECO mode sensing level\u003cbr\/\u003e- alarm relay\u003cbr\/\u003e- monitoring: input and output voltage, load and alarms\u003cbr\/\u003e\u003cbr\/\u003eVE.Direct:\u003cbr\/\u003eUsing the VE.Direct port, you can connect to a computer (VE.Direct to USB interface cable required) and configure and monitor the same parameters.\u003cbr\/\u003e\u003cbr\/\u003eProven reliability:\u003cbr\/\u003eThe full bridge and toroidal transformer topology has proven its reliability over many years. The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.\u003cbr\/\u003e\u003cbr\/\u003eHigh starting performance:\u003cbr\/\u003eRequired to start loads such as inverters for LED bulbs, halogen bulbs, refrigerators or power tools.\u003cbr\/\u003e\u003cbr\/\u003eECO mode:\u003cbr\/\u003eIn ECO mode, the inverter switches to standby mode when the load drops below a preset value. In standby mode, the inverter turns on for a short period of time every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.\u003cbr\/\u003e\u003cbr\/\u003eRemote on\/off:\u003cbr\/\u003eA remote switch or relay contact can be connected to the two-pole connector. Alternatively, the H terminal (left) of the two-pole connector can be switched to battery plus or the L terminal (right) of the two-pole connector can be switched to battery minus.\u003cbr\/\u003e\u003cbr\/\u003eLED diagnostics:\u003cbr\/\u003eThe status LEDs can be used to diagnose the device, see the instruction manual.\u003cbr\/\u003e\u003cbr\/\u003eVictron Connect:\u003cbr\/\u003eThe VictronConnect application is used to monitor, control and configure the inverter. The app can be installed on a phone, tablet or computer. The app is available for Android, iOS, Windows and macOS. The app communicates either via Bluetooth or via a USB interface with the VE.Direct port.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e- Output voltage: 230 V AC ± 2% 50 Hz or 60 Hz ± 0.1%.\u003cbr\/\u003e- continuous power at 25 oC: 2000 VA \/ 1600 W\u003cbr\/\u003e- Peak power: 4000 W\u003cbr\/\u003e- max. efficiency: 94 %\u003cbr\/\u003e- self-consumption at zero load: max. 9 W\u003cbr\/\u003e- self-consumption at zero load in ECO mode: max. 1.3 W\u003cbr\/\u003e- 230 V AC connection: screw terminals\u003cbr\/\u003e- Operating temperature range: -40 to +65oC (fan-assisted cooling)\u003cbr\/\u003e- Humidity (non-condensing): max. 95%\u003cbr\/\u003e- protection class: IP21\u003cbr\/\u003e- weight: 13 kg\u003cbr\/\u003e- Dimension: 485 x 219 x 125 mm","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":53159335559506,"sku":"04230541","price":23590.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230541_e64dddde-a76d-4205-8d10-091057086d34.png?v=1776147308"},{"product_id":"menic-napeti-victron-energy-sun-inverter-12v-250a-15-iec","title":"Victron Energy Sun Inverter 12V\/250A-15 IEC","description":"The Victron Energy voltage converter is an efficient and reliable voltage converter built on a proven and field-tested platform. The inverter incorporates a robust toroidal transformer that has proven its reliability in Victron Energy inverters for many years.\u003cbr\/\u003e\u003cbr\/\u003eKey Features:\u003cbr\/\u003e\u003cbr\/\u003eHigh starting power:\u003cbr\/\u003eRequired to start loads such as inverters for LED bulbs, halogen lamps or power tools.\u003cbr\/\u003e\u003cbr\/\u003eECO mode:\u003cbr\/\u003eIn ECO mode, the inverter switches to standby mode when the load falls below a preset value (min. load: 15 W). Once in standby mode, the inverter will switch on for a short period of time (adjustable, default: every 2.5 seconds). If the load exceeds the preset level, the inverter will remain on.\u003cbr\/\u003e\u003cbr\/\u003ePWM solar charger:\u003cbr\/\u003eThe solar charger provides battery charging with energy obtained from your solar panels. The charging algorithm is programmable.\u003cbr\/\u003e\u003cbr\/\u003eRemote on\/off:\u003cbr\/\u003eThe Phoenix Inverter Control VE.Direct Remote panel (not included) can be used to turn the inverter on or off remotely. Alternatively, the remote switch can be plugged into the two-pole connector or between the battery plus and the left contact of the two-pole connector.\u003cbr\/\u003e\u003cbr\/\u003eLED diagnostics:\u003cbr\/\u003ePlease refer to the manual for a description of each condition.\u003cbr\/\u003e\u003cbr\/\u003eBluetooth:\u003cbr\/\u003eInverter and solar charger parameters can be read, monitored and configured via Bluetooth\u003cbr\/\u003eVictronConnect app.\u003cbr\/\u003e\u003cbr\/\u003eVE.Direct communication port:\u003cbr\/\u003eThe VE.Direct port can be used to connect to a GX device, GlobalLink 520 for monitoring through the VRM portal or to connect to a computer for monitoring or configuration using the VictronConnect app.\u003cbr\/\u003e\u003cbr\/\u003eMonitoring via the VictronConnect app or GX device:\u003cbr\/\u003e\u003cbr\/\u003eInverter input and output voltages and % load\u003cbr\/\u003eSolar energy, voltage and current\u003cbr\/\u003eOperating status and alarms\u003cbr\/\u003eFully configurable via the VictronConnect app:\u003cbr\/\u003e\u003cbr\/\u003eLow battery voltage alarm triggering and level reset\u003cbr\/\u003eLow battery shutdown and restart levels\u003cbr\/\u003eDynamic shutdown: load-dependent shutdown levels\u003cbr\/\u003eOutput voltage 210 - 245 V and frequency 50 Hz or 60 Hz\u003cbr\/\u003eECO mode on\/off and ECO mode sensing level\u003cbr\/\u003eBattery charging current, algorithm and voltage\u003cbr\/\u003eTemperature compensation for battery charging or low temperature level reduction\u003cbr\/\u003eLoad transfer to another AC power source: automatic transfer switch:\u003cbr\/\u003eFor our low power inverters, we recommend our Filax automatic transfer switch. Filax features a very short switching time (less than 20 milliseconds), so computers and other electronic devices yes\u003cbr\/\u003econtinue to operate without interruption.\u003cbr\/\u003e\u003cbr\/\u003eDC and PV connections with screw terminals:\u003cbr\/\u003eNo special cable terminals or tools are required for installation\u003cbr\/\u003e\u003cbr\/\u003eAvailable with IEC-320 socket:\u003cbr\/\u003eIEC-320 plug included.\u003cbr\/\u003e\u003cbr\/\u003eSpecifications:\u003cbr\/\u003e\u003cbr\/\u003e230 V AC +\/- 3% 50 Hz or 60 Hz +\/- 0.1%.\u003cbr\/\u003econtinuous power at 25 oC: 250 VA \/ 200 W\u003cbr\/\u003ePeak power: 400 W\u003cbr\/\u003emax. efficiency: 87%\u003cbr\/\u003eself-consumption at zero load: max 4.2 W\u003cbr\/\u003eself-consumption in ECO mode: max 0.8 W\u003cbr\/\u003e230 V AC connection: IEC-320 plug\u003cbr\/\u003eOperating temperature range: -40 to +60 oC (fan-assisted cooling)\u003cbr\/\u003eHumidity (non-condensing): max. 95%\u003cbr\/\u003eProtection class: IP21\u003cbr\/\u003eweight: 2.4 kg\u003cbr\/\u003eDimension: 86 x 165 x 260 mm","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":53196843549010,"sku":"04230709","price":2590.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230709_093fe250-efa8-4a23-9f94-aa1d67c4a6a9.png?v=1776934020"},{"product_id":"menic-napeti-victron-energy-sun-inverter-24v-250va-10-iec","title":"Měnič napětí Victron Energy Sun Inverter 24V\/250VA-10 IEC","description":"Měnič napětí Victron Energy je účinný a spolehlivý měnič napětí postaven na osvědčené a v praxi otestované platformě. Měnič obsahuje robustní toroidní transformátor, který prokazuje svou spolehlivost v měničích Victron Energy po mnoho let. \u003cbr\u003e\u003cbr\u003eHlavní vlastnosti:\u003cbr\u003e\u003cbr\u003eVysoký startovací výkon:\u003cbr\u003ePotřebné ke spuštění zátěží, jako jsou měniče pro LED žárovky, halogenové žárovky nebo elektrické nářadí.\u003cbr\u003e\u003cbr\u003eECO režim:\u003cbr\u003eV režimu ECO se střídač přepne do pohotovostního režimu, když zatížení klesne pod předem nastavenou hodnotu (min. zátěž: 15 W). Jakmile je střídač v pohotovostním režimu, na krátkou dobu se zapne (nastavitelné, výchozí: každých 2,5 sekundy). Pokud zátěž překročí přednastavenou úroveň, střídač zůstane zapnutý.\u003cbr\u003e\u003cbr\u003ePWM solární nabíječka:\u003cbr\u003eSolární nabíječka zajišťuje nabíjení baterií energií získanou z vašich solárních panelů. Nabíjecí algoritmus je programovatelný.\u003cbr\u003e\u003cbr\u003eDálkové zapnutí\/vypnutí:\u003cbr\u003ePanel Phoenix Inverter Control VE.Direct Remote (není součástí dodávky) lze použít k zapnutí měniče popř. vzdáleně vypnout. Alternativně lze dálkový vypínač zapojit do dvoupólového konektoru nebo mezi něj baterie plus a levý kontakt dvoupólového konektoru.\u003cbr\u003e\u003cbr\u003eLED diagnostika:\u003cbr\u003ePopis jednotlivých stavů naleznete v příručce.\u003cbr\u003e\u003cbr\u003eBluetooth:\u003cbr\u003eParametry střídače a solární nabíječky lze číst, monitorovat a konfigurovat pomocí Bluetooth v aplikaci VictronConnect.\u003cbr\u003e\u003cbr\u003eVE.Přímý komunikační port:\u003cbr\u003ePort VE.Direct lze použít pro připojení k zařízení GX, GlobalLink 520 pro monitorování prostřednictvím VRM portálu nebo pro připojení k počítači pro monitorování nebo konfiguraci pomocí aplikace VictronConnect.\u003cbr\u003e\u003cbr\u003eMonitorování prostřednictvím aplikace VictronConnect nebo zařízení GX:\u003cbr\u003eVstupní a výstupní napětí invertoru a % zatížení\u003cbr\u003eSolární energie, napětí a proud\u003cbr\u003eProvozní stav a alarmy\u003cbr\u003ePlně konfigurovatelné prostřednictvím aplikace VictronConnect:\u003cbr\u003e\u003cbr\u003eSpuštění alarmu nízkého napětí baterie a resetování úrovní\u003cbr\u003eÚrovně vypnutí a restartu při nízkém napětí baterie\u003cbr\u003eDynamické vypínání: úroveň vypínání závislá na zatížení\u003cbr\u003eVýstupní napětí 210 – 245 V a frekvence 50 Hz nebo 60 Hz\u003cbr\u003eZapnutí\/vypnutí režimu ECO a úroveň snímání režimu ECO\u003cbr\u003eNabíjecí proud baterie, algoritmus a napětí\u003cbr\u003eTeplotní kompenzace nabíjení baterie nebo snížení úrovně nízké teploty\u003cbr\u003ePřevedení zátěže na jiný zdroj střídavého proudu: \u003cbr\u003epřepínač automatického přenosu\u003cbr\u003ePro naše střídače s nízkým výkonem doporučujeme náš automatický převodový spínač Filax. Filax se vyznačuje velmi krátká doba přepnutí (méně než 20 milisekund), takže počítače a další elektronická zařízení pokračovat v provozu bez přerušení.\u003cbr\u003e\u003cbr\u003eDC a PV připojení se šroubovými svorkami:\u003cbr\u003eK instalaci nejsou potřeba žádné speciální kabelové koncovky ani nástroje\u003cbr\u003e\u003cbr\u003eK dispozici se zásuvkou IEC-320:\u003cbr\u003eSoučástí dodávky je zástrčka IEC-320.\u003cbr\u003e\u003cbr\u003eTechnické parametry:\u003cbr\u003e\u003cbr\u003evýstupní napětí: 230 V AC +\/- 3% 50 Hz nebo 60 Hz +\/- 0,1%\u003cbr\u003etrvalý výkon při 25 oC: 250 VA \/ 200 W\u003cbr\u003ešpičkový výkon: 400 W\u003cbr\u003emax. účinnost: 88 %\u003cbr\u003evlastní spotřeba při nulovém zatížení: max 5,2 W\u003cbr\u003evlastní spotřeba v režimu ECO: max 1,3 W\u003cbr\u003epřipojení 230 V AC: zástrčka IEC-320\u003cbr\u003erozpětí provozních teplot: -40 až +60 oC (ventilátorem podporované chlazení)\u003cbr\u003evlhkost (nekondenzující): max. 95%\u003cbr\u003etřída ochrany: IP21\u003cbr\u003ehmotnost: 2,4 kg\u003cbr\u003erozměr: 86 x 165 x 260 mm","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":53196844138834,"sku":"04230711","price":2590.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230711_ef2174f1-c5c2-4905-a4a5-0470b1295537.png?v=1776934046"},{"product_id":"menic-napeti-victron-energy-12v-1600va-ve-direct","title":"Voltage converter Victron Energy 12V\/1600VA VE.Direct","description":"The Victron Energy voltage converter is an efficient and reliable voltage converter built on a proven and field-tested platform. The inverter incorporates a robust toroidal transformer that has proven its reliability in Victron Energy inverters for many years.\u003cbr\/\u003e\u003cbr\/\u003eKey Features:\u003cbr\/\u003e\u003cbr\/\u003eEasily accessible terminals:\u003cbr\/\u003eInstallation is easier than ever because the terminals are now more accessible to the installer.\u003cbr\/\u003e\u003cbr\/\u003eVE.Direct:\u003cbr\/\u003e\u003cbr\/\u003eThe VE.Direct port can be connected to:\u003cbr\/\u003e\u003cbr\/\u003eComputer (VE.Direct to USB interface cable required)\u003cbr\/\u003eSmartphones, tablets, MacBooks and other Apple and Android devices (VE.Direct Bluetooth Smart dongle required)\u003cbr\/\u003eFully configurable:\u003cbr\/\u003e\u003cbr\/\u003eLow battery alarm triggering and level reset\u003cbr\/\u003eLow battery shutdown and restart levels\u003cbr\/\u003eDynamic shutdown: load-dependent shutdown levels\u003cbr\/\u003eOutput voltage 210 - 245 V\u003cbr\/\u003eFrequency 50 Hz or 60 Hz\u003cbr\/\u003eECO mode on\/off and ECO mode sensing level\u003cbr\/\u003eMonitoring:\u003cbr\/\u003e\u003cbr\/\u003eInput and output voltages, % load and alarms\u003cbr\/\u003eProven reliability:\u003cbr\/\u003eThe full bridge and toroidal transformer topology has proven its reliability over many years. The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.\u003cbr\/\u003e\u003cbr\/\u003eHigh starting performance:\u003cbr\/\u003eRequired to start loads such as inverters for LED bulbs, halogen bulbs, refrigerators or power tools.\u003cbr\/\u003e\u003cbr\/\u003eECO mode:\u003cbr\/\u003eIn ECO mode, the inverter switches to standby mode when the load drops below a preset value. In standby mode, the inverter turns on for a short period of time every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.\u003cbr\/\u003e\u003cbr\/\u003eRemote on\/off:\u003cbr\/\u003eThe remote switch can be connected to the two-pole connector or between the battery plus and left contact of the two-pole connector.\u003cbr\/\u003e\u003cbr\/\u003eLED diagnostics:\u003cbr\/\u003eThe status LEDs can be used to diagnose the device, see instructions for use.\u003cbr\/\u003e\u003cbr\/\u003eVictron Connect:\u003cbr\/\u003eThe VictronConnect application is used to monitor, control and configure the inverter. The app can be installed on a phone, tablet or computer. The app is available for Android, iOS, Windows and macOS. The app communicates either via Bluetooth or via a USB interface with the VE.Direct port.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eOutput voltage: 230 V AC ± 2% 50 Hz or 60 Hz ± 0.1%.\u003cbr\/\u003econtinuous power at 25 oC: 1600 VA \/ 1300 W\u003cbr\/\u003ePeak power: 2200 W\u003cbr\/\u003emax. efficiency: 92 %\u003cbr\/\u003eself-consumption at zero load: max. 8 W\u003cbr\/\u003eself-consumption at zero load in ECO mode: max. 0.6 W\u003cbr\/\u003e230 V AC connection: screw terminals\u003cbr\/\u003eOperating temperature range: -40 to +65oC (fan-assisted cooling)\u003cbr\/\u003eHumidity (non-condensing): max. 95%\u003cbr\/\u003eprotection class: IP21\u003cbr\/\u003eweight: 8.86 kg\u003cbr\/\u003eDimension: 190 x 425 x 285 mm","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":53244045623634,"sku":"04230710","price":7680.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230710_c230d003-dc05-4139-ad7a-ef20c56d7c2e.png?v=1776934032"},{"product_id":"menic-napeti-nabijec-victron-energy-multiplus-ii-48v-5000va-70a-50a","title":"Voltage converter\/charger Victron Energy MultiPlus-II 48V\/5000VA\/70A-50A","description":"Victron Energy MultiPlus-II 48V\/5000VA\/70A-50A inverter\/charger\u003cbr\/\u003eThe MultiPlus is a powerful DC-AC inverter\/charger with pure sine wave output, an integrated adaptive battery charger and an ultra-fast power source transfer switch (battery\/external AC source).\u003cbr\/\u003e\u003cbr\/\u003eThe MultiPlus-II is a multi-function inverter\/charger with the ability to connect an external current sensor, extending the PowerControl and PowerAssist features, ideal for use in islanded and ESS systems. It also has all the features of the MultiGrid unit with built-in anti-islanding protection on its AC input - enhanced protection to prevent unwanted supply to the distribution grid in the event of a grid failure.\u003cbr\/\u003e\u003cbr\/\u003eMain features:\u003cbr\/\u003e\u003cbr\/\u003ePowerControl and PowerAssist:\u003cbr\/\u003eMultiPlus-II prevents overloading of a power-limited AC source, e.g. a current-limited power connection or generator. Should a large load overload the input AC source, the charging current to the battery will be automatically reduced in the first step (PowerControl). The energy for charging is shifted to power the AC appliances. In the second step, the input AC source is boosted by the current drawn from the battery (PowerAssist). The AC output receives energy from the AC source and the battery (inverter) together.\u003cbr\/\u003e\u003cbr\/\u003eSolar power:\u003cbr\/\u003eAC power can be available even in the event of a grid failure. MuliPlus-II can be used in off-grid (islanded) systems as well as in PV systems permanently connected to the distribution grid. The MultiPlus-II is not equipped with a PV array input, but is designed to work with MPPT controllers (DC coupling systems) or grid-tied inverters (AC coupling systems) located at the AC input and\/or AC output.\u003cbr\/\u003e\u003cbr\/\u003eOne AC input:\u003cbr\/\u003eThe MultiPlus-II is equipped with one AC input for connection to the distribution grid or to a generator, for example. If two AC inputs are required, then select the Quattro unit.\u003cbr\/\u003e\u003cbr\/\u003eTwo AC outputs:\u003cbr\/\u003eMultiPlus-II is equipped with two AC outputs. The main AC1 output ensures power supply without power interruption. For example, in UPS mode, the MultiPlus-II will take over power to connected appliances (in less than 20 milliseconds) in the event of a mains or generator failure. The second AC output is only functional when the AC input (distribution network\/generator) is available. Therefore, a load that would quickly drain the batteries, such as a water heater, can be connected to this output and it will only be powered from the AC source.\u003cbr\/\u003e\u003cbr\/\u003eVirtually unlimited power due to parallel and three-phase operation:\u003cbr\/\u003eUp to 6 MultiPlus-II units can operate in parallel to achieve higher performance. For example, six 48\/5000\/70 units provide 25kW\/30kVA output power and 420A charging power. Three units of the same type can be configured for three-phase operation with phase shifting. But that's not all, up to 6 units in parallel can form a single phase. Thus, a three-phase system can consist of up to 18 units with a total continuous output power of 75kW\/90kVA and a charging power of 1200A.\u003cbr\/\u003eThe MultiPlus-II 8k, 10k and 15k models can only be connected in parallel if an external AC transfer switch is used. For more information, refer to the MultiPlus-II External Transfer Switch Application Guide.\u003cbr\/\u003e\u003cbr\/\u003eESS: Energy Storage Systems\u003cbr\/\u003eThe MultiPlus-II is a key element in Victron Energy's ESS system, providing the flexibility to combine with solar MPPT controllers or grid-tied PV inverters.\u003cbr\/\u003e\u003cbr\/\u003eConfigure, monitor and control the system locally:\u003cbr\/\u003eSettings can be changed using the VEConfigure software (PC or laptop and MK3-USB interface required).\u003cbr\/\u003e\u003cbr\/\u003eRemote configuration and monitoring:\u003cbr\/\u003eInstall a Cerbo GX or other GX device to connect to the Internet. Operational data can be stored and displayed on the VRM (Victron Remote Management) website free of charge. Once connected to the Internet, systems can be accessed remotely and settings changed. Several monitoring and control options are available: Cerbo GX, Ekrano GX, Color Control GX, Venus GX, laptop, PC, Bluetooth (with optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel.\u003cbr\/\u003e\u003cbr\/\u003eFour stage adaptive charger with two outputs for battery charging:\u003cbr\/\u003eThe main DC output provides powerful full battery charging via an \"adaptive charging\" system. The software controls the three-stage automatic charging process to suit the condition of the battery and adds a fourth charging stage - maintenance charging. MultiPlus-II is designed to charge all types of lead acid, alkaline and lithium batteries.\u003cbr\/\u003e\u003cbr\/\u003eSystem configuration:\u003cbr\/\u003eIn the case of a simple e.g. UPS installation, the setup can be easily done in a few minutes using the DIP switches on the MultiPlus-II or the VE.Configure 3 software and a PC. Parallel and three-phase applications can be configured using VE.Bus Quick Configure software (up to three units) or more complex systems using VE.Bus System Configurator software (above three units) and a PC.\u003cbr\/\u003eOff-grid and hybrid PV installations to support self-consumption and greater energy independence, which include grid-tied inverters and\/or solar MPPT chargers, can be configured using VE.Configure 3 software with the appropriate assistants (dedicated functions for specific applications).\u003cbr\/\u003e\u003cbr\/\u003eMultiPlus-II has several programmable relays and auxiliary contacts for a variety of additional functions. You can download the basic VE.Configure 3 software as well as other software for configuration options free of charge at the following link: https:\/\/www.victronenergy.com\/support-and-downloads\/software\u003cbr\/\u003eFor the above software you will need the PC communication interface MK3-USB.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- Manufacturer.\u003cbr\/\u003e- Technology: low frequency\u003cbr\/\u003e- continuous power: 4000 W\u003cbr\/\u003e- Battery voltage: 48 V\u003cbr\/\u003e- Bluetooth: no\u003cbr\/\u003e\u003cbr\/\u003e- Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0.1%\u003cbr\/\u003e- Input voltage: 187-265 VAC, frequency: 45-65 Hz\u003cbr\/\u003e- continuous power at 25oC: 5000 VA \/ 4000W\u003cbr\/\u003e- Peak power: 9000 W\u003cbr\/\u003e- Transfer current: 50A\u003cbr\/\u003e- Max. efficiency: 96%\u003cbr\/\u003e- self-consumption: max. 18 W\u003cbr\/\u003e- self-consumption in \"Search\" mode: 2 W\u003cbr\/\u003e- Operating temperature range: -40 to +65 °C (fan cooling)\u003cbr\/\u003e- Humidity (non-condensing): max. 95%\u003cbr\/\u003e- weight: 30 kg\u003cbr\/\u003e- Dimensions: 565 x 320 x 149 mm\u003cbr\/\u003e\u003cbr\/\u003eThis product requires professional installation.","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53588951138642,"sku":"04230699","price":20990.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230699.webp?v=1779954542"},{"product_id":"menic-napeti-victron-energy-1200va-12v-ve-direct-rozbaleno-poskozeny-obal","title":"Měnič napětí Victron Energy 1200VA 12V VE.Direct - rozbaleno - poškozený obal","description":"Měnič obsahuje robustní toroidní transformátor, který prokazuje svou spolehlivost v měničích Victron Energy již po mnoho let.\u003cbr\u003eMěniče jsou odolné proti zkratu a chráněný proti přehřátí, ať už v důsledku přetížení nebo\u003cbr\u003evysoké teploty okolí.\u003cbr\u003e \u003cbr\u003eTento měnič je plně konfigurovatelný – jedná se zcela unikátní funkci, kdy máte možnost nastavit si pomocí PC následující parametry:\u003cbr\u003e• alarm nízkého a vysokého napětí baterie a resetovací úroveň\u003cbr\u003e• úroveň vypnutí měniče při nízkém a vysokém napětí baterie a resetovací úroveň\u003cbr\u003e• Výstupní napětí 220\/230\/240V\u003cbr\u003e• Frekvence 50 Hz nebo 60 Hz\u003cbr\u003e• Režim ECO zapnutí \/ vypnutí nastavení citlivosti ( nastavení úrovně kdy se měnič „uspí“ a kdy se opět „probudí“)\u003cbr\u003e \u003cbr\u003eK dispozici je také monitoring:\u003cbr\u003e• vstupní a výstupní napětí a proud, teplota, alarmy\u003cbr\u003e \u003cbr\u003eVysoký startovací výkon\u003cbr\u003ePotřebný ke spuštění zátěží, jako jsou výkonové měniče pro LED lampy, halogenové lampy nebo elektrické nářadí.\u003cbr\u003e \u003cbr\u003eRežim ECO\u003cbr\u003eV režimu ECO - když příkon zátěže klesne pod přednastavenou hodnotu měnič se přepne do pohotovostního režimu (uspí se a vlastní spotřeba měniče je pak pouze cca 1W). V pohotovostním režimu s velmi nízkou vlastní spotřebou se pak bude měnič pravidelně na krátkou dobu zapínat (nastavitelný parametr, standardně: každý 2,5 sekundy). Pokud příkon zátěže překročí předem nastavenou hodnotu, měnič se opět zapne. Díky této funkci ušetříte velké množství energie, kterou jinak měnič spotřeboval pro svůj provoz.\u003cbr\u003e \u003cbr\u003eVE.Direct komunikační port, který může být připojen k:\u003cbr\u003e \u003cbr\u003e• Počítači (nutný kabel VE.Direct to USB)\u003cbr\u003e• Smartphony Apple a Android, tablety MacBooky a jiná zařízení ( nutný VE.Direct Bluetooth dongle)\u003cbr\u003e \u003cbr\u003eSoftware zdarma\u003cbr\u003eAktuální verze SW jsou k dispozici zde https:\/\/www.victronenergy.com\/support-and-downloads\/software#victronconnect-app\u003cbr\u003e \u003cbr\u003eVzdálené zapnutí \/ vypnutí, LED diagnostika – viz manuál.\u003cbr\u003e \u003cbr\u003eKabely pro připojení k baterii nejsou součástí, rádi Vám zhotovíme potřebné délky. Neváhejte nás proto kontaktovat.\u003cbr\u003e\u003cbr\u003eTechnické parametry:  \u003cbr\u003eTrvalý výst. výkon při 25°C (VA): 1200\u003cbr\u003eTrvalý činný výkon při 25 °C \/ 40 °C (W):1000\/850\u003cbr\u003eŠpičkový činný výkon (W): 2200\u003cbr\u003eHmotnost (kg): 7,4\u003cbr\u003eRozměry v x š x h (mm):117x232x327\u003cbr\u003e\u003cbr\u003eTechnické specifikace naleznete níže v dokumentech ke stažení","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":53597014982994,"sku":"90330142","price":6399.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/90330142.jpg?v=1780044577"},{"product_id":"solarni-invertor-volt-sinus-pro-ultra-plus-hv-11000-48-230v-5200-11000w-100a-mppt-450v","title":"Solar inverter VOLT Sinus Pro Ultra Plus HV 11000 48\/230V (5200\/11000W) + 100A MPPT (450V)","description":"LINK TO DOWNLOAD THE SOFTWARE FOR YOUR COMPUTER: SOLARLIFE - https:\/\/voltpolska.pl\/solarmonitor.exe\u003cbr\/\u003e\u003cbr\/\u003eSINUS PRO ULTRA-HV 11000 48\/230V (5200\/11000W) + 100A MPPT (450V) is a modern inverter that operates in a grid independent system.\u003cbr\/\u003e\u003cbr\/\u003eKey features:\u003cbr\/\u003e\u003cbr\/\u003eWorks as an off-grid (islanded) inverter.\u003cbr\/\u003eParameter configuration through settings on LCD display\u003cbr\/\u003eHigh voltage MPPT solar controller (450 V DC)\u003cbr\/\u003eCooperation with Ultra 5 energy storage\u003cbr\/\u003eShort circuit, overload and temperature protection\u003cbr\/\u003ePC software via USB (viewing and controlling parameters)\u003cbr\/\u003eOptional external remote control module can be purchased via WiFi.\u003cbr\/\u003eWhat devices are powered by the SINUS PRO ULTRA-HV 11000 ?\u003cbr\/\u003e\u003cbr\/\u003eRTV devices, e.g. TVs, tuners, hi-fi systems, DVD players\u003cbr\/\u003eHousehold appliances such as refrigerators, microwaves, blenders, toasters\u003cbr\/\u003eOffice equipment, e.g. printers, fax machines, computers, monitors\u003cbr\/\u003ePower tools, e.g. drills, grinders, angle grinders\u003cbr\/\u003ePumps, compressors\u003cbr\/\u003eWhat makes the SINUS PRO ULTRA-HV 11000 power supply different from other devices? Built-in pure SINUS\u003cbr\/\u003einverter generates a \"sine\" output voltage, identical to the mains voltage. This allows power to be supplied to inductive equipment (including power tools, air compressors, air conditioners, refrigerators, freezers, etc.).\u003cbr\/\u003e\u003cbr\/\u003eThe high voltage allows multiple solar panels to be connected in series instead of in parallel. This ensures higher efficiency of the entire solar panel system.\u003cbr\/\u003e\u003cbr\/\u003eHow does the inverter work in off-grid mode?\u003cbr\/\u003eIn off-grid mode, the solar inverter operates independently of the user's electrical grid. The energy collected from the solar panels is stored in batteries and then transferred to the connected load.\u003cbr\/\u003e\u003cbr\/\u003eWhen using the SINUS PRO ULTRA inverter in photovoltaic installations (cyclic battery charging), we recommend using batteries that are best suited for this purpose, e.g. GEL VPRO SOLAR, DEEP CYCLE VPRO SOLAR or LiFePO4 lithium.\u003cbr\/\u003e\u003cbr\/\u003eBe sure to select the appropriate battery type and the appropriate charging current for the capacity in the power supply settings. Improper selection of battery charging parameters may result in battery damage and void the battery warranty. The use of maintenance-free AGM batteries (e.g. AGM series, AGM OPTI, AGM VPRO) in photovoltaic installations (cyclic charging systems) can lead to a faster loss of battery efficiency\/capacity. Such batteries are designed and operate best in buffer mode (voltage backup, UPS systems).\u003cbr\/\u003e\u003cbr\/\u003eAs with other battery types, improper selection of charging current can lead to damage and void the battery warranty.\u003cbr\/\u003e\u003cbr\/\u003eSpecifications:\u003cbr\/\u003e\u003cbr\/\u003eTotal power (instantaneous): 11000VA\u003cbr\/\u003eConstant (continuous) power: 5200 W\u003cbr\/\u003eNo-load power consumption: 68 W\u003cbr\/\u003eOutput voltage waveform: Pure sine\u003cbr\/\u003eOutput voltage (inverter): 230 V DC\u003cbr\/\u003eMaximum efficiency (inverter): 90%-93%\u003cbr\/\u003eSwitching time (inverter): 10 ms (UPS) \/ 20 ms (APL)\u003cbr\/\u003eVoltage (mains input): 230 V AC\u003cbr\/\u003eInput voltage range (mains): 170~280 V AC\/90~280 V AC\/\u003cbr\/\u003eFrequency range: 50 Hz\/60 Hz\u003cbr\/\u003eBattery voltage: 48 V DC\u003cbr\/\u003eVmp voltage range: 150~430 V DC\u003cbr\/\u003eMax. no-load voltage Voc: 450 V DC\u003cbr\/\u003eMax. imp. current: 80A\u003cbr\/\u003eOperating temperature: 0°C~50°C\u003cbr\/\u003eDimension: 295x505x14.2 mm +\/-3%\u003cbr\/\u003eWeight: 13kg\u003cbr\/\u003e\u003cbr\/\u003eWe invite you to watch a very practical instructional video on how to wire the SINUS PRO ULTRA-HV off-grid inverter using the 6000HV 24V inverter as an example - https:\/\/www.youtube.com\/watch?v=loKn3noDPzo","brand":"VOLT","offers":[{"title":"Default Title","offer_id":53686900949330,"sku":"06447031","price":10999.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06447031.jpg?v=1780981202"},{"product_id":"solarni-invertor-volt-sinus-pro-ultra-plus-8500-24-230v-4200w-8500va-120a-mppt-60-500v-wifi","title":"Solar inverter VOLT Sinus Pro Ultra Plus 8500 24\/230V (4200W\/8500VA) + 120A MPPT (60-500V) WiFi","description":"The SINUS PRO ULTRA PLUS 8500 24\/230V is an advanced, multifunctional 3-in-1 device that combines the functions of an inverter, solar charger and battery charger. Thanks to the versatile LCD display, users can easily and intuitively configure key operating parameters and adapt them to the individual needs of the system.\u003cbr\/\u003e\u003cbr\/\u003eKey features:\u003cbr\/\u003e\u003cbr\/\u003eOff-grid (islanded) operation.\u003cbr\/\u003eIntuitive configuration.\u003cbr\/\u003eDual AC Output: The inverter has two outputs (main and auxiliary), allowing intelligent load management.\u003cbr\/\u003eBMS communication support - full cooperation with modern\u003cbr\/\u003eEnergy storage systems (e.g. ULTRA 5).\u003cbr\/\u003eBattery activation function.\u003cbr\/\u003eBuilt-in Wi-Fi module: allows remote monitoring of device operation via a dedicated iOS and Android app.\u003cbr\/\u003ePure Sine.\u003cbr\/\u003eMultiple output priority support: UTL, SOL, SBU, SUB.\u003cbr\/\u003eShort circuit, overload and temperature protection.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eTotal power (instantaneous): 8400VA\u003cbr\/\u003eConstant (continuous) power: 4200VA \/ 4200W\u003cbr\/\u003eNo-load power consumption: 30-60 W\u003cbr\/\u003eBattery voltage: 24 V DC\u003cbr\/\u003eVmp range of panels: 60~500 V DC\u003cbr\/\u003eInput voltage range (mains power): 170-280 VAC (home computers); 90-280 VAC (home appliances)\u003cbr\/\u003eOutput voltage range (battery mode): 220 V AC - 230 V AC +\/- 5%\u003cbr\/\u003eMaximum mains charging current: 120A\u003cbr\/\u003eMaximum charging current from solar panels: 120A\u003cbr\/\u003eOperating temperature: -10°C-50°C\u003cbr\/\u003eTightness class: IP21\u003cbr\/\u003eDimension: 368 × 320 × 120 mm +-5 %\u003cbr\/\u003eWeight: 7.9 kg +\/- 5%","brand":"VOLT","offers":[{"title":"Default Title","offer_id":53726241390930,"sku":"06447028","price":7839.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06447028.jpg?v=1781240979"},{"product_id":"solarni-invertor-volt-sinus-pro-ultra-plus-12000-48-230v-6200-12000w-120a-mppt-60-500v-wifi","title":"Solar inverter VOLT Sinus Pro Ultra Plus 12000 48\/230V (6200\/12000W) + 120A MPPT (60-500V) WiFi","description":"*NOTE: As of May 2026, the SINUS PRO ULTRA PLUS 12000 has a dual AC output for intelligent priority power.\u003cbr\/\u003e\u003cbr\/\u003eThe SINUS PRO ULTRA PLUS 12000 solar inverter combines several functions: inverter, solar charger and battery charger. The easy-to-read LCD display allows simple and intuitive operation with push-buttons for settings such as battery charging current, AC\/solar charger priority and allowed input voltage for different applications.\u003cbr\/\u003e\u003cbr\/\u003eDOWNLOAD LINK FOR SOLARLIFE COMPUTER SOFTWARE: https:\/\/voltpolska.pl\/solarmonitor.exe\u003cbr\/\u003e\u003cbr\/\u003eKey Features:\u003cbr\/\u003e\u003cbr\/\u003eWorks as an off-grid (islanded) inverter\u003cbr\/\u003eConfigurable input voltage range for home appliances and computers via LCD display settings\u003cbr\/\u003eConfigurable battery charging current depending on application through LCD display settings\u003cbr\/\u003eConfigurable mains\/solar charging priority via LCD settings\u003cbr\/\u003eCold start function\u003cbr\/\u003ePure sine\u003cbr\/\u003e120A MPPT solar controller (60-500V)\u003cbr\/\u003eCooperation with Ultra 5 energy storage\u003cbr\/\u003eAbility to monitor device parameters via WIFI\u003cbr\/\u003eEQ function - to optimize battery performance and extend battery life\u003cbr\/\u003eSupport for multiple output priorities: UTL, SOL, SBU, SUB\u003cbr\/\u003eShort circuit, overload and temperature protection\u003cbr\/\u003eWhat devices does the SINUS PRO ULTRA PLUS 12000 power?\u003cbr\/\u003e\u003cbr\/\u003eRTV equipment, e.g. TVs, tuners, hi-fi systems, DVD players\u003cbr\/\u003eHousehold appliances such as refrigerators, microwaves, blenders, toasters\u003cbr\/\u003eOffice equipment, e.g. printers, fax machines, computers, monitors\u003cbr\/\u003ePower tools, e.g. drills, grinders, angle grinders\u003cbr\/\u003ePumps, compressors\u003cbr\/\u003eWhat distinguishes the SINUS PRO ULTRA PLUS 12000?\u003cbr\/\u003e\u003cbr\/\u003eWake-up function when the battery is deeply discharged\u003cbr\/\u003e\u003cbr\/\u003eThis function is used to reactivate (reactivate) a fully discharged and unresponsive lithium battery. In some cases, the battery needs a short activation pulse before it can start charging normally - this is exactly what this option provides.\u003cbr\/\u003eYou can set the duration of this pulse - from 6 to 300 seconds. The default setting is 6 seconds, which is usually sufficient for most situations.\u003cbr\/\u003eThe value can be increased if the device fails to wake up the battery in the default time.\u003cbr\/\u003eThe EQ ( equalization) function is the process of equalizing the voltage between cells in the battery to:\u003cbr\/\u003e\u003cbr\/\u003eOptimize battery performance - ensuring that each cell in the battery operates in the optimal voltage range.\u003cbr\/\u003eExtend battery life - prevents excessive wear and tear on some cells, which can lead to faster wear and degradation.\u003cbr\/\u003eThis feature is applicable to lead acid batteries with liquid electrolyte.\u003cbr\/\u003eHow does the inverter work in off-grid mode?\u003cbr\/\u003eIn off-grid mode, the solar inverter operates independently of the user's electrical grid. The energy obtained from the solar panels is stored in the batteries and then transferred to the connected load.\u003cbr\/\u003e\u003cbr\/\u003eWhen using the SINUS PRO ULTRA PLUS series inverter for operation in photovoltaic installations (cyclic battery charging), we recommend using batteries that are best suited for this purpose, e.g. GEL VPRO SOLAR, DEEP CYCLE VPRO SOLAR or lithium LiFePO4.\u003cbr\/\u003e\u003cbr\/\u003eBe sure to select the appropriate battery type and the appropriate charging current for the capacity in the power supply settings. Improper selection of battery charging parameters may result in battery damage and void the battery warranty. The use of maintenance-free AGM batteries (e.g. AGM series, AGM OPTI, AGM VPRO) in photovoltaic installations (cyclic charging systems) can lead to a faster loss of battery efficiency\/capacity. Such batteries are designed and operate best in buffer mode (voltage backup, UPS systems).\u003cbr\/\u003e\u003cbr\/\u003eAs with other battery types, improper selection of charging current can lead to damage and void the battery warranty.\u003cbr\/\u003e\u003cbr\/\u003eSpecifications:\u003cbr\/\u003e\u003cbr\/\u003eTotal power (instantaneous): 12000VA\u003cbr\/\u003eConstant (continuous) power: 6200 W\u003cbr\/\u003eNo-load power consumption: Approximately 55 W\u003cbr\/\u003eBattery voltage: 48 V DC\u003cbr\/\u003eVmp range of panels: 60VDC-500VDC\u003cbr\/\u003eInput voltage range (mains power): 170-280VAC\u003cbr\/\u003eOutput voltage range (mains power): 220VAC-230VAC +\/- 5%\u003cbr\/\u003eMaximum mains charging current: 80A\u003cbr\/\u003eMaximum charging current from solar panels: 120A\u003cbr\/\u003eOperating temperature: -10°C-55°C\u003cbr\/\u003eDimension: 438x295x105mm+-5%\u003cbr\/\u003eWeight: 8.9 kg +\/- 5%\u003cbr\/\u003e\u003cbr\/\u003eWe invite you to watch these very practical instructional videos:\u003cbr\/\u003e\u003cbr\/\u003eHow to activate a deeply discharged battery using the SINUS PRO ULTRA PLUS 3000 as an example - https:\/\/www.youtube.com\/watch?v=0EQGFx-TA5g\u003cbr\/\u003eHow to configure the SINUS PRO ULTRA PLUS 7000\/12000 step by step - https:\/\/www.youtube.com\/watch?v=s-kTtwMNtf8","brand":"VOLT","offers":[{"title":"Default Title","offer_id":53726241489234,"sku":"06447029","price":12755.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06447029.jpg?v=1781240993"},{"product_id":"solarni-invertor-volt-sinus-pro-ultra-plus-7000-24-230v-3500-7000w-100a-mppt-60-500v-wifi","title":"Solar inverter VOLT Sinus Pro Ultra Plus 7000 24\/230V (3500\/7000W) + 100A MPPT (60-500V) WiFi","description":"Solar inverter SINUS PRO ULTRA 7000 24\/230V combines\u003cbr\/\u003eseveral functions: inverter, solar charger and battery charger. The easy-to-read LCD display allows simple and intuitive operation with buttons for settings such as battery charging current, AC\/solar charger priority and allowed input voltage for different applications.\u003cbr\/\u003e\u003cbr\/\u003eKey Features:\u003cbr\/\u003eFunctions as an off-grid (islanded) inverter.\u003cbr\/\u003eConfigurable input voltage range for home appliances and computers via LCD display settings\u003cbr\/\u003eConfigurable battery charging current depending on the application through LCD display settings.\u003cbr\/\u003eConfigurable mains\/solar charging priority via LCD settings.\u003cbr\/\u003eWake-up function for deeply discharged battery.\u003cbr\/\u003eCold start function.\u003cbr\/\u003ePure sine.\u003cbr\/\u003e100A MPPT solar controller (30-500V)\u003cbr\/\u003eEQ function - to optimize battery performance and extend battery life.\u003cbr\/\u003eSupport for multiple output priorities: UTL, SOL, SBU, SUB\u003cbr\/\u003eShort circuit, overload and temperature protection.\u003cbr\/\u003e\u003cbr\/\u003eTECHNICAL DATA\u003cbr\/\u003eTotal power (instantaneous):\u003cbr\/\u003e7000VA\u003cbr\/\u003eConstant (continuous) power:\u003cbr\/\u003e3500VA \/ 3500W\u003cbr\/\u003eNo-load power consumption:\u003cbr\/\u003e35 W\u003cbr\/\u003eBattery voltage:\u003cbr\/\u003e24 V DC\u003cbr\/\u003eVmp range of panels:\u003cbr\/\u003e30~500 V DC\u003cbr\/\u003eInput voltage range (mains power):\u003cbr\/\u003e170-280 VAC (home computers); 90-280 VAC (home appliances)\u003cbr\/\u003eOutput voltage range (battery mode):\u003cbr\/\u003e220 V AC - 230 V AC +\/- 5%\u003cbr\/\u003eMaximum mains charging current:\u003cbr\/\u003e60A\u003cbr\/\u003eMaximum charging current from solar panels:\u003cbr\/\u003e100A\u003cbr\/\u003eOperating temperature:\u003cbr\/\u003e-10°C-55°C\u003cbr\/\u003eTightness class:\u003cbr\/\u003eIP21\u003cbr\/\u003eDimensions:\u003cbr\/\u003e330x278x98mm+-5%\u003cbr\/\u003eWeights:\u003cbr\/\u003e4.4 kg +\/- 5%","brand":"VOLT","offers":[{"title":"Default Title","offer_id":53726241522002,"sku":"06447061","price":10625.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06447061.jpg?v=1781241006"}],"url":"https:\/\/tipa-production.myshopify.com\/en\/collections\/ostrovni-off-grid-stridace.oembed","provider":"TIPA","version":"1.0","type":"link"}