{"title":"Heating controllers","description":"Key components for proper power supply of heating equipment \u003ca href=\"https:\/\/www.tipa.eu\/cz\/solarni-panely\/c-1495\/\"\u003edirectly from solar panels\u003c\/a\u003e. Our controllers ensure optimal operation and minimize energy losses.","products":[{"product_id":"solarni-regulator-volt-green-boost-pro-5000-sinus-bypass-pro-ohrev-vody","title":"Solar controller VOLT Green Boost Pro 5000 Sinus BYPASS for water heating","description":"Solar inverter GREEN BOOST PRO 5000 SINUS BYPASS is used to power heating devices from photovoltaic panels and the electricity grid.\u003cbr\/\u003e\u003cbr\/\u003eWhat makes the GREEN BOOST PRO 5000 SINUS BYPASS solar inverter unique?\u003cbr\/\u003e\u003cbr\/\u003eMultifunctionality (BYPASS) - the inverter can be connected to both solar panels and the electrical grid.\u003cbr\/\u003ePure sine wave - the inverter produces a \"sine wave\" output voltage. This allows it to power inductive devices such as power tools, air conditioners, refrigerators, freezers, etc.\u003cbr\/\u003e\u003cbr\/\u003eHow does the GREEN BOOST PRO 5000 SINUS BYPASS solar inverter work?\u003cbr\/\u003eThe direct current generated by solar panels is not suitable for directly powering heating devices. The inverter converts it into alternating current that can be used to power heating devices. The panels should be connected in series with a total voltage of up to 500 V (Voc) and an impedance of up to 15 A.\u003cbr\/\u003e\u003cbr\/\u003eWhat devices does the GREEN BOOST PRO 5000 SINUS BYPASS solar inverter power?\u003cbr\/\u003e\u003cbr\/\u003eElectric boilers\u003cbr\/\u003eRadiators\u003cbr\/\u003eElectric heaters\u003cbr\/\u003eElectric mats\u003cbr\/\u003eUnderfloor heating\u003cbr\/\u003e\u003cbr\/\u003eTechnical data\u003cbr\/\u003e\u003cbr\/\u003eMaximum power:5000 W\u003cbr\/\u003eOutput voltage range:70-245 V AC \/ 50 Hz\u003cbr\/\u003eAllowable voltage range from Voc panels:160 V DC - 500 V DC\u003cbr\/\u003eMaximum power output of PV panels:? 5000 W\u003cbr\/\u003eMaximum DC current from Imp panels:15A\u003cbr\/\u003eOutput voltage type:Pure sine\u003cbr\/\u003eSolar panel connection:In series\u003cbr\/\u003eOutput socket:1 pcs\/1 connection rail\u003cbr\/\u003eOperating mode:MPPT \/ STABLE\u003cbr\/\u003eDisplay:LED\u003cbr\/\u003eOverload protection:Yes\u003cbr\/\u003eShort circuit protection:Yes\u003cbr\/\u003eOver temperature protection:Yes - 100±10?\u003cbr\/\u003eCooling:Active fans\u003cbr\/\u003eWarning:Audible and visual signals\u003cbr\/\u003eOverheat protection:Yes \/ 100±10?\u003cbr\/\u003eOperating Temperature:-25 to +55°C\u003cbr\/\u003eStorage temperature:-20 to +55°C\u003cbr\/\u003eProtection Class:IP20\u003cbr\/\u003eDimensions:311x232x140mm (including MC-4)\u003cbr\/\u003eWeight:5.2 kg","brand":"VOLT","offers":[{"title":"Default Title","offer_id":52541905469778,"sku":"04280462","price":8459.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04280462_0d032b5a-586a-40a5-a903-83a417fb6bef.png?v=1776149602"},{"product_id":"solarni-invertor-geti-gwh01-4000w-mppt-pro-pv-ohrev-vody","title":"GETI GWH01 4000W MPPT solar inverter for PV water heating","description":"The GETI GWH01 4000W MPPT inverter enables the direct use of photovoltaic panel systems to power resistance heating devices such as electric boilers, heaters, heating mats, water heating, etc. The inverter is also equipped with an AC input, which allows connecting the inverter to the mains voltage and heating water even in a time when sunlight is insufficient for heating.\u003cbr\/\u003e\u003cbr\/\u003eNote: The GETI GWH inverter is only suitable for resistive loads with a bimetallic thermostat (not suitable for electronically controlled thermostats!)\u003cbr\/\u003e           The inverter output (L, N) must not be connected to the mains or earth!\u003cbr\/\u003e\u003cbr\/\u003eThe system is simple, it only requires the connection of the appropriate number of photovoltaic panels with a maximum output of 4000W with an operating voltage of 160 ~ 350V DC, a mains voltage of 230C AC and a connection with a resistive load, e.g. electric heater, electric boiler, heating coils, underfloor heating, etc.\u003cbr\/\u003e\u003cbr\/\u003eThe GETI GWH01 inverter is equipped with an LED diode panel that informs the user about the current status of the inverter. :\u003cbr\/\u003e- indication of water heating from PV panels\u003cbr\/\u003e- indication of water heating from the 230V AC network\u003cbr\/\u003e- traffic indication\u003cbr\/\u003e- error status indication\u003cbr\/\u003e\u003cbr\/\u003eThe direct current generated in the panels, which cannot be fed directly to the heating devices, is converted into alternating current in the inverter, which can be used to power the heating devices.\u003cbr\/\u003e\u003cbr\/\u003eThe maximum power of the system is 4000 W. The inverter has a priority input from the photovoltaic panels, and when this voltage drops below 120V, the water heating will be powered from the mains voltage of 230V AC.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- input voltage (VDC): 160 to 350 (VDC)\u003cbr\/\u003e- input voltage (VAC): 230 V AC\u003cbr\/\u003e- output voltage [VAC]:  0-260 V AC (VAC)\u003cbr\/\u003e- maximum power: 4000 W\u003cbr\/\u003e- load type: resistive with bimetal thermostat (not suitable for electronically controlled thermostats!)\u003cbr\/\u003e- the value of the resistive load must not be lower than 13 Ohm\u003cbr\/\u003e- MPPT function: YES\u003cbr\/\u003e- connection of PV panels: Series or series-parallel\u003cbr\/\u003e- priority input: PV panels\u003cbr\/\u003e- backup input: mains 230V AC\u003cbr\/\u003e- working temperature: -25 °C ~ + 55 °C\u003cbr\/\u003e- efficiency: \u003e 99%\u003cbr\/\u003e- cooling: passive\u003cbr\/\u003e- protection against short circuit at the input\u003cbr\/\u003e- protection against overheating\u003cbr\/\u003e- cooling: passive\u003cbr\/\u003e- input connection of PV panels: MC4 connectors\u003cbr\/\u003e- input connection 230V AC: screw terminal\u003cbr\/\u003e- 230V AC output connection: screw terminal\u003cbr\/\u003e- material: Aluminum\u003cbr\/\u003e- degree of protection: IP65\u003cbr\/\u003e- dimensions L x W x H [mm]: 250 x 155 x 80 mm\u003cbr\/\u003e- weight: 3 kg\u003cbr\/\u003e\u003cbr\/\u003ePackaging: 1 pc\u003cbr\/\u003e\u003cbr\/\u003ePackage contents: 1 pc Solar inverter GETI GWH01 4000W ","brand":"GETI","offers":[{"title":"Default Title","offer_id":52557103038802,"sku":"04290246","price":4499.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04290246_f6bdeb49-8dfc-486e-8676-55a593a21e1f.png?v=1776147689"},{"product_id":"solarni-regulator-volt-green-boost-4000-bypass","title":"Solárny regulátor VOLT Green Boost 4000 BYPASS","description":"The GREEN BOOST 4000 BYPASS solar regulator is used to power heating devices from PV solar panels and the electrical network.\u003cbr\/\u003e\u003cbr\/\u003eWhat makes the GREEN BOOST 4000 BYPASS solar controller different?\u003cbr\/\u003eMultifunctionality (BYPASS) - the controller can be connected to both solar panels and the electrical network.\u003cbr\/\u003eThe panels should be connected in series with a total voltage of up to 350V. The maximum PV input current is 20A.\u003cbr\/\u003e\u003cbr\/\u003eWhat devices does the GREEN BOOST 4000 BYPASS solar controller power?\u003cbr\/\u003e\u003cbr\/\u003eElectric boilers\u003cbr\/\u003eRadiators\u003cbr\/\u003eElectric heaters\u003cbr\/\u003eElectric mats\u003cbr\/\u003eFloor heating\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eMaximum power: 4000W\u003cbr\/\u003eOutput voltage range: 180-260VAC\/50Hz\u003cbr\/\u003ePermissible voltage range from the panels: 160VDC-350VDC\u003cbr\/\u003eAllowable voltage range from panels (MPPT): 120VDC-340VDC\u003cbr\/\u003eMaximum direct current from the panels: 20A\u003cbr\/\u003eSolar panel connection: Serial\u003cbr\/\u003eInput socket: 2 pcs\u003cbr\/\u003eWorking mode: MPPT\/STABLE\u003cbr\/\u003eView: GUIDED\u003cbr\/\u003eOverload protection: Yes\u003cbr\/\u003eShort circuit protection: Yes\u003cbr\/\u003eOverheat protection: Yes - 100±10?\u003cbr\/\u003eCooling: Active \u003cbr\/\u003eWarning: Audible and visual signals\u003cbr\/\u003eOverheat protection: Yes \/ 100±10?\u003cbr\/\u003eWorking temperature: From -25 to +55°C\u003cbr\/\u003eStorage temperature: From -20 to +55°C\u003cbr\/\u003eDimensions: 195 x 183 x 100 mm\u003cbr\/\u003eWeight: 2.4 kg","brand":"VOLT","offers":[{"title":"Default Title","offer_id":53037399474514,"sku":"04280385","price":6820.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04280385_4170604c-bd5a-4f2e-839c-6aafd60d3252.png?v=1776148420"},{"product_id":"solarni-invertor-geti-gwh02d-4000w-mppt-pro-pv-ohrev-vody","title":"GETI GWH02D 4000W MPPT solar inverter for PV water heating","description":"The GETI GWH02D solar inverter is particularly suitable for use in systems for photovoltaic water heating.\u003cbr\/\u003e\u003cbr\/\u003eSave costs and heat water using solar energy today. With the GETI GWH02D Solar Inverter, featuring automatic switching to the grid and the ability to independently set the water heating temperature from PV or AC, you can significantly reduce your hot water heating costs.\u003cbr\/\u003e\u003cbr\/\u003eThe GETI GWH02D 4000W MPPT inverter, developed for PV water heating, allows direct use of photovoltaic panel systems to power resistive heating devices, such as water heaters, heaters, heating mats, or heating coils. Additionally, the inverter is equipped with an AC input, allowing it to be connected to the mains power and heat water even when solar radiation is insufficient for heating.\u003cbr\/\u003e\u003cbr\/\u003eNote: The GETI GWH inverter is only suitable for resistive loads with a bimetal thermostat (not suitable for electronically controlled thermostats!).\u003cbr\/\u003eThe inverter output (L, N) must not be connected to the electrical grid or grounded!\u003cbr\/\u003e\u003cbr\/\u003eThe system is simple, requiring only the connection of the appropriate number of photovoltaic panels with a maximum output of 4000W and an operating voltage of 160 ~ 350V DC, mains voltage of 230V AC, and connection to a resistive load, such as a heating coil, electric water heater, electric radiator, or underfloor heating and protective devices.\u003cbr\/\u003e\u003cbr\/\u003eThe direct current generated in the panels, which cannot be directly supplied to heating devices, is converted in the inverter to alternating current that can be used to power heating devices.\u003cbr\/\u003e\u003cbr\/\u003eThe maximum system power is 4000W. The inverter has a priority input from photovoltaic panels, and when this voltage drops below 120V, water heating will be powered by mains voltage 230V AC.\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- solar inverter for heating water using resistive load (heating coil, water heater)\u003cbr\/\u003e- temperature sensor\u003cbr\/\u003e- automatic switching between networks (PV \/ grid 230V AC)\u003cbr\/\u003e- operating modes: PV only as an island system or PV + grid\u003cbr\/\u003e- quiet operation ensured by passive cooling\u003cbr\/\u003e- effective maximum power tracking on panels using MPPT\u003cbr\/\u003e- high efficiency \u003e 99%\u003cbr\/\u003e\u003cbr\/\u003eThe GETI GWH02D inverter is equipped with a clear LED display that informs the user about current and set values:\u003cbr\/\u003e\u003cbr\/\u003e- indication of water heating from PV panels\u003cbr\/\u003e- indication of water heating from the 230V AC grid\u003cbr\/\u003e- water temperature (PV, AC) current and set\u003cbr\/\u003e- PV power\u003cbr\/\u003e- PV voltage\u003cbr\/\u003e- operation indication\u003cbr\/\u003e- error status indication\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- input voltage (VDC): 160 to 350 (VDC)\u003cbr\/\u003e- input voltage (VAC): 230 V AC\u003cbr\/\u003e- output voltage [VAC]:  0-260 V AC (VAC)\u003cbr\/\u003e- maximum power: 4000 W\u003cbr\/\u003e- PV input current: 20A max.\u003cbr\/\u003e- AC output current: 20A max.\u003cbr\/\u003e- load type: resistive with bimetal thermostat (not suitable for electronically controlled thermostats!)\u003cbr\/\u003e- the value of the resistive load must not be lower than 13 Ohm\u003cbr\/\u003e- MPPT function: YES\u003cbr\/\u003e- connection of PV panels: Series or series-parallel\u003cbr\/\u003e- priority input: PV panels\u003cbr\/\u003e- backup input: mains 230V AC\u003cbr\/\u003e- working temperature: -25 °C ~ + 55 °C\u003cbr\/\u003e- efficiency: \u003e 99%\u003cbr\/\u003e- temperature sensor length: 3m\u003cbr\/\u003e- cooling: passive\u003cbr\/\u003e- protection against short circuit at the input\u003cbr\/\u003e- protection against overheating\u003cbr\/\u003e- cooling: passive\u003cbr\/\u003e- input connection of PV panels: MC4 connectors\u003cbr\/\u003e- input connection 230V AC: screw terminal\u003cbr\/\u003e- 230V AC output connection: screw terminal\u003cbr\/\u003e- material: Aluminum\u003cbr\/\u003e- degree of protection: IP65\u003cbr\/\u003e- dimensions L x W x H [mm]: 255 x 201 x 95 mm\u003cbr\/\u003e- weight: 3 kg\u003cbr\/\u003e\u003cbr\/\u003ePackaging: 1 pc\u003cbr\/\u003e\u003cbr\/\u003ePackage contents: 1 pc Solar inverter GETI GWH02D 4000W","brand":"GETI","offers":[{"title":"Default Title","offer_id":53044412842322,"sku":"04291121","price":7399.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04291121_8da4f8f6-2df5-42bb-b79c-38b6bf8ca57a.png?v=1776148658"},{"product_id":"solarni-regulator-volt-green-boost-mppt-3000-bypass-pro-ohrev-vody","title":"Solar regulator for water heating VOLT Green Boost MPPT 3000 BYPASS","description":"The VOLT GREEN BOOST MPPT 3000 BAYPASS solar converter is an advanced device for directly supplying heating systems with energy from photovoltaic panels. Thanks to the MPPT function, it ensures maximum energy efficiency, while the BAYPASS system allows automatic switching to the mains in case of insufficient energy production. The perfect solution for powering boilers, heaters, electric mats and underfloor heating.\u003cbr\/\u003e\u003cbr\/\u003eThe VOLT GREEN BOOST MPPT 3000 BAYPASS is a modern solar converter that converts the direct current generated by photovoltaic panels into alternating current, allowing direct powering of heating devices. The MPPT (Maximum Power Point Tracking) system optimizes the operation of the installation and maximizes the efficiency of energy conversion.\u003cbr\/\u003e\u003cbr\/\u003eThanks to the built-in BAYPASS function, the converter automatically switches to power from the mains in case of a lack of energy supplied by the PV panels. This ensures continuous heating operation even on days with low sunlight.\u003cbr\/\u003e\u003cbr\/\u003eFor the device to function properly, it is enough to connect 4 to 9 photovoltaic panels with a power of 250W to 400W each. The panels can be configured both in series and in series-parallel, thus adapting the installation to the user's conditions.\u003cbr\/\u003e\u003cbr\/\u003eThe VOLT GREEN BOOST MPPT 3000 BAYPASS solar inverter is ideal for powering:\u003cbr\/\u003e\u003cbr\/\u003eElectric boilers\u003cbr\/\u003eElectric heaters\u003cbr\/\u003eElectric mats\u003cbr\/\u003eRadiators\u003cbr\/\u003eUnderfloor heating\u003cbr\/\u003e\u003cbr\/\u003eThe device, thanks to its solid construction and numerous protections (overload, short circuit, thermal), ensures long-term and trouble-free operation. Active cooling and audible and visual warnings further increase user safety.\u003cbr\/\u003e\u003cbr\/\u003eDual output socket - Intelligent power management\u003cbr\/\u003e\u003cbr\/\u003eThe converter is equipped with two GB 3000 output sockets, which allow the connection of two heating devices simultaneously.\u003cbr\/\u003e\u003cbr\/\u003eThe first socket (PRIMARY) serves the main device and always has power priority.\u003cbr\/\u003eThe second outlet (SECONDARY) is activated automatically when the device connected to the first outlet stops consuming power. If the load on the PRIMARY outlet reappears, the power to the SECONDARY outlet will be interrupted.\u003cbr\/\u003eIn MPPT mode, the output voltage can range from 120V to 245V AC, depending on the power obtained from the PV panels.\u003cbr\/\u003eIn STABLE mode, the output voltage is 230V AC with sufficient PV energy.","brand":"VOLT","offers":[{"title":"Default Title","offer_id":53047437197650,"sku":"04280410","price":5299.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04280410.png?v=1776148872"},{"product_id":"solarni-regulator-volt-green-boost-pro-5000-sinus-bypass-pro-ohrev-vody-rozbaleno-poskozeny-obal","title":"Solární regulátor VOLT Green Boost Pro 5000 Sinus BYPASS pro ohřev vody - rozbaleno - poškozený obal","description":"Solární invertor GREEN BOOST PRO 5000 SINUS BYPASS se používá k napájení topných zařízení z fotovoltaických panelů a elektrické sítě.\u003cbr\u003e\u003cbr\u003eCo dělá solární invertor GREEN BOOST PRO 5000 SINUS BYPASS jedinečným?\u003cbr\u003e\u003cbr\u003eMultifunkčnost (BYPASS) - měnič lze připojit jak k solárním panelům, tak k elektrické síti.\u003cbr\u003eČistý sinus – měnič produkuje „sinusové“ výstupní napětí. To mu umožňuje napájet indukční zařízení, jako je elektrické nářadí, klimatizace, ledničky, mrazničky atd.\u003cbr\u003e\u003cbr\u003eJak funguje solární invertor GREEN BOOST PRO 5000 SINUS BYPASS?\u003cbr\u003eStejnosměrný proud generovaný solárními panely není vhodný pro přímé napájení topných zařízení. Invertor jej převádí na střídavý proud, který lze použít k napájení topných zařízení. Panely by měly být zapojeny sériově s celkovým napětím až 500 V (Voc) a impedancí až 15 A.\u003cbr\u003e\u003cbr\u003eJaká zařízení solární invertor GREEN BOOST PRO 5000 SINUS BYPASS napájí?\u003cbr\u003e\u003cbr\u003eElektrické kotle\u003cbr\u003eRadiátory\u003cbr\u003eElektrické ohřívače\u003cbr\u003eElektrické rohože\u003cbr\u003ePodlahové vytápění\u003cbr\u003e\u003cbr\u003eTechnické údaje\u003cbr\u003e\u003cbr\u003eMaximální výkon:5000 W\u003cbr\u003eRozsah výstupního napětí:70–245 V AC \/ 50 Hz\u003cbr\u003ePřípustný rozsah napětí z panelů Voc:160 V DC - 500 V DC\u003cbr\u003eMaximální výkon FV panelů:? 5000 W\u003cbr\u003eMaximální stejnosměrný proud z panelů Imp:15A\u003cbr\u003eTyp výstupního napětí:Čistý sinus\u003cbr\u003ePřipojení solárního panelu:V sérii\u003cbr\u003eVýstupní zásuvka:1 ks\/1 připojovací lišta\u003cbr\u003eProvozní režim:MPPT \/ STABILNÍ\u003cbr\u003eZobrazit:LED\u003cbr\u003eOchrana proti přetížení:Ano\u003cbr\u003eOchrana proti zkratu:Ano\u003cbr\u003eOchrana proti přehřátí:Ano - 100±10?\u003cbr\u003eChlazení:Aktivní ventilátory\u003cbr\u003eVarování:Zvukové a vizuální signály\u003cbr\u003eOchrana proti přehřátí:Ano \/ 100±10?\u003cbr\u003eProvozní teplota:Od -25 do +55 °C\u003cbr\u003eSkladovací teplota:Od -20 do +55 °C\u003cbr\u003eTřída ochrany: IP20\u003cbr\u003eRozměry:311x232x140mm (včetně MC-4)\u003cbr\u003eVáhy:5,2 kg","brand":"VOLT","offers":[{"title":"Default Title","offer_id":53204222869842,"sku":"90329957","price":8199.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/90329957.jpg?v=1777021983"}],"url":"https:\/\/tipa-production.myshopify.com\/en\/collections\/regulatory-pro-ohrev-vody.oembed","provider":"TIPA","version":"1.0","type":"link"}