{"title":"Soldering \u0026 reworking stations","description":"Do you need a quality service station for your work or even for your research? Rely on the products of our e-shop TIPA.EU. The service stations allow you a wide range of work with integrated circuits and \u003ca href=\"https:\/\/www.tipa.eu\/cz\/soucastky\/c-911\/\"\u003eelectronic components\u003c\/a\u003e. Service stations are soldering and desoldering stations with perfectly regulated and microprocessor-controlled tip temperature. Soldering stations are also equipped with \u003ca href=\"https:\/\/www.tipa.eu\/cz\/odsavacky-cinu\/c-1174\/\"\u003edegaussers\u003c\/a\u003e, blowers and integrated \u003ca href=\"https:\/\/www.tipa.eu\/cz\/multimetry\/c-1163\/\"\u003emultimeters\u003c\/a\u003e.\u0026nbsp; Order a service station, today's electronics can't do without it.","products":[{"product_id":"pajeci-horkovzdusna-stanice-zd-912","title":"Soldering and repair station ZD-912","description":"ZD-912 Soldering \u0026 Reworking Station is a high-performance and multi-function station. It is suitable for soldering and desoldering all type of surface mounted IC and prevents any damage to the PCB or components.\u003cbr\/\u003e\u003cbr\/\u003eFeatures\u003cbr\/\u003e-  Good appearance and easily use\u003cbr\/\u003e-  Hot air heat up and the temperature increase quickly\u003cbr\/\u003e-  The hot air temperature can by calibrated from 160°C to 480°C continuously\u003cbr\/\u003e-  The hot air temperature can be calibrated from 3L\/min to 24L\/min continuously\u003cbr\/\u003e-  Having multiple absorbing tips of different inner diameters, and suitable to remove all types of chips\u003cbr\/\u003e-  Having the thermostat function and suitable for soldering different components automatically\u003cbr\/\u003e-  Playing overall rolls in one station with desoldering and soldering function. Widely used in the fields \u003cbr\/\u003e    of the electronic production and repairing like chips soldering\/desoldering nad repairing\u003cbr\/\u003e-  The temperature sensor on the top of the tips can check the tip temperature quickly and decreasing \u003cbr\/\u003e    the possibility of the tip temperature falling off during the operating and suitable for lead free soldering.\u003cbr\/\u003e\u003cbr\/\u003eStation:\u003cbr\/\u003e-  Input voltage: 110-130V AC, 220-240V AC\u003cbr\/\u003e-  Power consumption: 60W + 320W\u003cbr\/\u003e-  Main fuse: 3,15A\/250V\u003cbr\/\u003e-  Air pump: diaphragm\u003cbr\/\u003e\u003cbr\/\u003eSolder:\u003cbr\/\u003e-  Voltage: 24V AC\u003cbr\/\u003e-  Power: 60W (heat up rating 130W)\u003cbr\/\u003e-  Temperature: 160°C - 480°C\u003cbr\/\u003e-  Heating element: ceramic heater\u003cbr\/\u003e\u003cbr\/\u003eHot air smd rework:\u003cbr\/\u003e-  Voltage: 110V - 130V AC, 220V - 240V AC\u003cbr\/\u003e-  Capacity: 24L\/min (max)\u003cbr\/\u003e-  Power: 320W\u003cbr\/\u003e-  Temperature: 160°C - 480°C\u003cbr\/\u003e","brand":"ZHONGDI","offers":[{"title":"Default Title","offer_id":52541694640466,"sku":"06520004","price":4490.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06520004_8600308a-3fb1-449c-af98-5f62ee154f93.png?v=1776145201"},{"product_id":"pajeci-odpajeci-stanice-zd-917","title":"Soldering and desoldering station ZD-917","description":"Temperature Controlled Soldering and Desoldering Station Model ZD-917  is a high-performance and multi-function station. It is suitable for soldering and desoldering. LCD display soldering \u0026 desoldering station features:\u003cbr\/\u003e-  Having one desoldering iron with absorbing gun and one soldering station in one station, and playing overall rolls with soldering and desoldering function.\u003cbr\/\u003e-  Exceptional high-performance PTC in the desoldering iron provide a long life  and continuously controlled supply of heat, suitable for desoldering all type of  components and easy removal of the residual solder.\u003cbr\/\u003e-  Having the thermostat function and suitable for soldering different components  automatically. The soldering iron and desoldering iron can be used independently or at the same time.\u003cbr\/\u003e-  The temperature sensor on the top of the tips can check the tip temperature quickly   and decreasing the possibility of the tip temperature falling off during the operating   and suitable for lead free soldering.\u003cbr\/\u003e\u003cbr\/\u003eStation:\u003cbr\/\u003e-  Input voltage:  220-240V AC \/ 50Hz\u003cbr\/\u003e-  Power consumption: 60W + 80W\u003cbr\/\u003e-  Main fuse: 3,15A\u003cbr\/\u003e-  Function display: LCD\u003cbr\/\u003e\u003cbr\/\u003eSolder:\u003cbr\/\u003e-  Voltage: 24V AC\u003cbr\/\u003e-  Power: 60W (heat up rating 130W)\u003cbr\/\u003e-  Temperature: 160°C - 480°C\u003cbr\/\u003e-  Heating element: ceramic heater\u003cbr\/\u003e\u003cbr\/\u003eDesolder:\u003cbr\/\u003e-  Voltage: 24V AC\u003cbr\/\u003e-  Vacuum pressure: 600mm Hg\u003cbr\/\u003e-  Power: 80W (heat up rating 130W)\u003cbr\/\u003e-  Temperature: 160°C - 480°C\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical specification\u003cbr\/\u003e\u003cbr\/\u003eDual LCD display\u003cbr\/\u003eDesoldering gun + soldering iron\u003cbr\/\u003ePower consumption: 60W soldering, 90W desoldering\u003cbr\/\u003eTemperature: 160°C up to 480°C\u003cbr\/\u003eHigh quality ceramic heater\u003cbr\/\u003ePower supply: 220-240V AC\/50Hz\u003cbr\/\u003eIron stands included\u003cbr\/\u003e\u003cbr\/\u003e","brand":"ZHONGDI","offers":[{"title":"Default Title","offer_id":52541694804306,"sku":"06520005","price":3690.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06520005_ae98b2f0-5a81-49bb-94e7-3c89e790a04d.png?v=1776145202"},{"product_id":"odpajeci-stanice-zd-915","title":"Desoldering station ZD-915","description":"The desoldering station designed for lead free desoldering especially. The quick heating and strong power are for convenient and clear soldering \/ desoldering all types of DIP components. Reasonable structure, single hand operation and strong absorbing power can be easy removal of the residual solder from the one-sided or two sided of the PCB. This tool is used in the fields of electronic research, teaching and production, especially in the repairing and desoldering on the electronic appliances and communication equipments. \u003cbr\/\u003eThe desoldering iron gun is controlled automatically by the micro-processor. The digital control electronics and igh-quality sensor and heat exchange system guarantee precise temperature control at the soldering tip. The highest degree or temperature precision and optimal dynamic thermal behavior under load conditions is obtained by he quick and accurate recording of the measured values in a closed control circuit, and this design is especially for the lead-free production technics. \u003cbr\/\u003eThe desoldering iron gun with a power of 80W (heat up rating 130W) and a wide spectrum of soldering tips (N5 series) can be used anywhere in the electronics field. The high power and gun type desing make this iron gun suitable for fine desoldering work. The heating element is made of PTC and the sensor on the desoldering tip can control the desoldering temperature quickly and accurately. \u003cbr\/\u003e\u003cbr\/\u003eTechnical data: \u003cbr\/\u003e\u003cbr\/\u003eStation: \u003cbr\/\u003e-  Input voltage: 220-240 V \u003cbr\/\u003e-  Power consumption: 140 W \u003cbr\/\u003e-  Main fuse: 3,15 A \u003cbr\/\u003e-  VACCUM pressure: 600 mm Hg \u003cbr\/\u003e\u003cbr\/\u003eDesoldering gun: \u003cbr\/\u003e-  Voltage: 24 V \u003cbr\/\u003e-  Power: 80 W (heat up rating 130 W) \u003cbr\/\u003e-  Temperature: 160°C ~ 480°C \u003cbr\/\u003e-  Heating element: PTC ceramic heater\u003cbr\/\u003e","brand":"ZHONGDI","offers":[{"title":"Default Title","offer_id":52541696672082,"sku":"06520010","price":2490.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06520010_e8425e25-f1bc-4441-87c8-9501b31f9496.png?v=1776145151"},{"product_id":"horkovzdusna-stanice-zd-939l","title":"Hot Air SMD Rework station ZD-939L","description":"The ZD-939L desktop service station with display has a temperature range of 160°C – 480°C. This makes it ideal for desoldering sensitive SMD components such as SOIC, CHIP, PLCC, BGA, and similar. It protects circuits from damage caused by static electricity or electrical surges.\u003cbr\/\u003e\u003cbr\/\u003eIt is also useful in many other applications where a concentrated hot air flow is needed, such as cleaning 3D printers, heat application, or heating materials during maintenance or assembly. The temperature can be set via the LCD display, and the unit heats up quickly to the operating temperature. The airflow can be continuously adjusted using the diaphragm pump and four different nozzles included in the package. Additional nozzles can be purchased according to the shape of the SMD component. The handle is equipped with anti-slip rubber for greater comfort and easier handling. Tweezers are included for removing SMD ICs.\u003cbr\/\u003e\u003cbr\/\u003eProduct Features:\u003cbr\/\u003e\u003cbr\/\u003e \u003cbr\/\u003eDisplays both preset and actual tip\/air temperature on the LCD\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eContinuously adjustable air temperature\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eContinuously adjustable hot air flow\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eSuitable for SMD components\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003e4 interchangeable nozzles: 2.5 mm, 4.4 mm, 10×10 mm, 14×14 mm (types 79-3901, 79-3902, 79-3903, 79-3907) for a concentrated airflow\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eCan be used for blowing or soldering SMD components with solder paste\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eAutomatically switches off heating, and the fan turns off after a short delay\u003cbr\/\u003e\u003cbr\/\u003eTechnical Specifications:\u003cbr\/\u003eOperating voltage: 220–240V AC \/ 50Hz\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eMaximum power: 320 W\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTemperature range: 160°C – 480°C\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eType K thermocouple\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eWeight: approx. 2 kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eDimensions: 160 × 145 × 225 mm\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eType of soldering iron: desoldering tool \/ hot air blower\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eAir diaphragm compressor capacity: max. 24 l\/min\u003cbr\/\u003e\u003cbr\/\u003e4 nozzles (types 79-3901, 79-3902, 79-3903, 79-3907)\u003cbr\/\u003e\u003cbr\/\u003ePackage Contents:\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eZD-939L service station\u003cbr\/\u003e\u003cbr\/\u003e4 interchangeable nozzles\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTweezers for picking up and removing ICs\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eStand for holding the tool\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eUser manual in Czech, Slovak, English, and German","brand":"ZHONGDI","offers":[{"title":"Default Title","offer_id":52541734715730,"sku":"06520013","price":2250.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06520013_3964d6f3-9035-49a9-9874-d55319f531dc.png?v=1776145286"},{"product_id":"odpajeci-stanice-zd-8915","title":"Desoldering station ZD-8915","description":"Temperature Controlled Desoldering Station Model : ZD-8915 is designed for lead free desoldering especially. The quick heating and strong power are for convenient and clear soldering \/ desoldering all types of DIP components.\u003cbr\/\u003e\u003cbr\/\u003eTechnical Specification :\u003cbr\/\u003e\u003cbr\/\u003e-  Display LCD\u003cbr\/\u003e-  Power consumption: 90 bis 200W\u003cbr\/\u003e-  Adjustable temperature: 160°C up to 480°C\u003cbr\/\u003e-  Vacuum Presure 600mm Hg\u003cbr\/\u003e-  Designed for lead free desoldering\u003cbr\/\u003e-  Suitable for all types of DIP components\u003cbr\/\u003e-  Temperature adjustable by up\/down buttons\u003cbr\/\u003e-  Power supply: 220-240V AC\/50Hz","brand":"ZHONGDI","offers":[{"title":"Default Title","offer_id":52541758406994,"sku":"06520024","price":2890.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06520024.png?v=1776145478"},{"product_id":"horkovzdusna-stanice-zd-8908","title":"Hot Air SMD Rework station ZD-8908","description":"This ZD-8908 hot air blower has a temperature range of 100 ° C - 500 ° C. This makes it ideal for shrink tubing, for desoldering sensitive SMD circuits such as SOIC, CHIP, PLCC, BGA and so on. It protects the circuits from static electricity damage and electrical leakage. However, they can also be used in a number of other areas of application where concentrated hot air flow is important, eg for cleaning 3D printers, hot-plugging, heating materials during maintenance or assembly. The temperature can be set on the LED display. The amount of air can be regulated continuously by adjusting the fan speed and using the three different tips that are included. Additional tips-tips according to the shape of the SMD part can be purchased. The pen is equipped with a non-slip rubber grip for greater comfort and ease of handling.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- display of tip temperature on LED display\u003cbr\/\u003e- infinitely adjustable air temperature\u003cbr\/\u003e- stepless adjustment of hot air volume\u003cbr\/\u003e- 3 pieces of exchangeable tips for concentrated air flow\u003cbr\/\u003e- integrated in a single device\u003cbr\/\u003e- can be used for blowing and soldering SMD circuits with solder paste\u003cbr\/\u003e- Sleep mode - when the handle is placed in the holder, the heating and the fan are switched off automatically\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eOperating voltage: 220-240V AC \/ 50Hz\u003cbr\/\u003e- power (max.): 300 W\u003cbr\/\u003e- temperature (min.): 100 ° C\u003cbr\/\u003e- temperature (max.): 500 ° C\u003cbr\/\u003e- weight: 1,2 kg\u003cbr\/\u003e- Dimensions: 12.5 x 11 x 15.5 cm\u003cbr\/\u003e- type of soldering iron: desoldering device\u003cbr\/\u003e- air pump capacity max. 20l \/ min\u003cbr\/\u003e- 3 × extension: diameter 4.4 + 8 + 12mm\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePackage contents :\u003cbr\/\u003e\u003cbr\/\u003e- Hot air blower ZD-8908 with handle\u003cbr\/\u003e- 3 interchangeable attachments\u003cbr\/\u003e- storage rack\u003cbr\/\u003e- Czech, Slovak, English and German operating instructions","brand":"ZHONGDI","offers":[{"title":"Default Title","offer_id":52541777903954,"sku":"06520021","price":1290.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06520021_7f123d95-67af-46d2-a5fa-b3c0f2893969.png?v=1776145526"},{"product_id":"horkovzdusna-pajecka-zd-8907-prirucni","title":"Hot Air SMD Rework station ZD-8907","description":"This handheld blower ZD-8907 has a temperature range of 200 ° C - 500 ° C. This makes it ideal for shrink tubing, for desoldering sensitive SMD circuits such as SOIC, CHIP, PLCC, BGA and so on. Protects the circuitry from static electricity damage. But it can also be used in many other areas of application where concentrated hot air flow is important, eg for cleaning 3D printers. The temperature can be set on the LCD display. The amount of air can be adjusted using the different tips that are included. The pen is equipped with a two-component handle with non-slip rubber, which offers greater comfort and easier handling.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- display tip temperature on LCD\u003cbr\/\u003e- infinitely adjustable temperature\u003cbr\/\u003e- adjustment of the hot air volume in three stages\u003cbr\/\u003e- 3 pieces of exchangeable tips for concentrated air flow\u003cbr\/\u003e- integrated in a single device, without base\u003cbr\/\u003e- can be used for blowing and soldering SMD circuits with solder paste\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eOperating voltage: 220-240V AC \/ 50Hz\u003cbr\/\u003e- temperature (min.): 200 ° C\u003cbr\/\u003e- temperature (max.): 500 ° C\u003cbr\/\u003eWeight: 0.4 kg\u003cbr\/\u003e- power (max.): 320 W\u003cbr\/\u003e- width: 56 mm\u003cbr\/\u003e- length: 300 mm\u003cbr\/\u003e- type of soldering iron: desoldering device\u003cbr\/\u003e- air pump capacity max. 22l \/ min\u003cbr\/\u003e- 3 × extension: diameter 4.4 + 8 + 12mm\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePackage contents :\u003cbr\/\u003e- ZD-8907 soldering iron handle\u003cbr\/\u003e- 3 interchangeable attachments\u003cbr\/\u003e- storage rack\u003cbr\/\u003e- Czech and English operating instructions","brand":"ZHONGDI","offers":[{"title":"Default Title","offer_id":52541787504978,"sku":"06520022","price":1199.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06520022.png?v=1776145580"},{"product_id":"pajeci-odpajeci-stanice-zd-8917b","title":"Soldering and desoldering station ZD-8917B","description":"The high-performance multifunctional (soldering \/ desoldering) station ZD-8917B is developed and manufactured for research, production and repair of electronic products and is adapted for lead-free soldering and desoldering. This device is used in the field of electronic research, teaching and production, especially in the repair and reworking of electronic devices and communication equipment. Thanks to the fast heating and high power, this station is suitable for clean desoldering of all types of printed circuit components. Thanks to the cleverly designed structure, one-handed operation and high performance, solder can be easily removed (sucked out) from single-sided or double-sided printed circuits. This desoldering station with a suction pump is used in the field of electronic research, teaching and production, especially in the repair of electronic devices and communication equipment.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e1) ZD-8917B control unit: This soldering station is automatically controlled by two microprocessors. Digital control electronics and a high-quality heat transfer system together with sensors in the tips. The sensors are included in the feedback of the electronics control circuits and ensure the highest degree of accuracy in setting and maintaining the temperature.\u003cbr\/\u003e\u003cbr\/\u003e2) Soldering iron (ZD415T)\u003cbr\/\u003e\u003cbr\/\u003eThe ZD-415T soldering iron with a power of 48W (when heated up to 130W) has a wide selection of soldering tips and can be used anywhere in the field of electronics. High performance and slim design make this solder an ideal tool for fine soldering work. The heater is made of PTC and the soldering tip sensor can quickly and accurately control the soldering temperature. The tips are interchangeable (series N9) and it is possible to buy other tips of the types.\u003cbr\/\u003e\u003cbr\/\u003e3) Desoldering iron (ZD-553T)\u003cbr\/\u003e\u003cbr\/\u003eThe handle of the ZD-533T desoldering iron with a power of 80W (when heated up to 130W) and can be used anywhere in the field of electronics. High performance and slim design make this solder an ideal tool for desoldering work. The heater is made of PTC and the desoldering tip sensor can quickly and accurately control the desoldering temperature. Supplied suction tips N5-1, N5-2, N5-3.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters :\u003cbr\/\u003e\u003cbr\/\u003e1) Service station ZD-8917B\u003cbr\/\u003e- input voltage: 220 - 240V AC \/ 50Hz\u003cbr\/\u003e- power consumption: up to 140W\u003cbr\/\u003e- main fuse 3.15A\u003cbr\/\u003e- vacuum pressure: 600mm Hg\u003cbr\/\u003e\u003cbr\/\u003e2) Soldering iron (ZD415T)\u003cbr\/\u003e- heating element supply voltage: 24V AC\u003cbr\/\u003e- nominal power consumption 60W (when heating up to 130W)\u003cbr\/\u003e- temperature: 160 ° C-480 ° C\u003cbr\/\u003e\u003cbr\/\u003e3) Desoldering iron (ZD-553T)\u003cbr\/\u003e- heating element supply voltage: 24V AC\u003cbr\/\u003e- nominal power consumption 90W (when heating up to 130W)\u003cbr\/\u003e- temperature: 160 ° C-480 ° C\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePackage contents :\u003cbr\/\u003e\u003cbr\/\u003e- control unit ZD-8917B\u003cbr\/\u003e- soldering iron (ZD415T)\u003cbr\/\u003e- desoldering iron (ZD-553T)\u003cbr\/\u003e- 3 pcs of suction tips with holes of diameters 0.8mm (type N5-2), 1.0mm (type N5-1), 1.3mm (type N5-3)\u003cbr\/\u003e- 1 piece of soldering tip N9-x\u003cbr\/\u003e- 3 pcs of wires for cleaning the suction tips\u003cbr\/\u003e- 1 pc storage holder for solder handle\u003cbr\/\u003e- 1 piece of storage holder for the handle of the extractor with cleaning metal wool\u003cbr\/\u003e-  spare air filters (1pc dia. 9mm + 3pcs dia.16,8mm)\u003cbr\/\u003e-  instructions for use","brand":"ZHONGDI","offers":[{"title":"Default Title","offer_id":52541811556690,"sku":"06520023","price":4390.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06520023.png?v=1776145368"},{"product_id":"odpajeci-stanice-zd-8925","title":"Desoldering station ZD-8925","description":"Temperature Controlled Desoldering Station Model : ZD-8925 is designed for lead free desoldering especially. The quick heating and strong power are for convenient and clear soldering \/ desoldering all types of DIP components.The desoldering gun is controlled automatically by the micro-processor. The digital control electronics, high-quality sensor and heat exchange system guarantees precise temperature control of the soldering tip. The highest degree of temperature precision and optimal dynamic thermal behavior under load conditions is obtained by the quick and accurate recording of the measured values in a closed control circuit, and this design is especially for the lead-free production technics. Desoldering gun  with a power of 90W  (heat up rating 200W) and a wide spectrum of soldering tips (N5 series) can be used anywhere in the electronics field. The high power and gun type design makes this desoldering gun suitable for fine desoldering work. The heating elements are made of PTC and the sensor on the desoldering tip can control the desoldering temperature quickly and accurately.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e-  voltage:\u003cbr\/\u003e      desoldering station: 220-240V AC \/ 50Hz\u003cbr\/\u003e      desoldering gun: 24V\u003cbr\/\u003e-  desolderign gun: 90W\u003cbr\/\u003e-  adjustable temperature: 160-480°C\u003cbr\/\u003e-  spare tips: 0.8mm ( typ N5-2 ), 1.0mm (typ N5-1), 1.3mm ( typ N5-3)","brand":"ZHONGDI","offers":[{"title":"Default Title","offer_id":52541851730258,"sku":"06520025","price":2490.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06520025.png?v=1776145462"},{"product_id":"pajeci-horkovzdusna-stanice-zd-8922","title":"Soldering and repair station ZD-8922","description":"This hot air service station ZD-8922 2 in 1 consists of a hot air station and solder. It is a very efficient and cost-effective solution. The station is suitable for soldering and desoldering all types of SMD surface integrated circuits, printed circuit boards and other components. Innovative heating and temperature sensor technology ensures fast heating and temperature recovery. The handle of the hot air pump is also equipped with a sensor. If you lift the unit off the stand, it immediately goes into operation mode. When you return to the stand, it returns to standby mode.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- hot air station for desoldering SMD circuits at temperatures of 100 to 500 ° C\u003cbr\/\u003e- sleep mode when the handle is put away with hot air\u003cbr\/\u003e- soldering iron for soldering, tip temperature 50 to 480 ° C\u003cbr\/\u003e- two LED displays to show the temperature of the soldering iron and hot air\u003cbr\/\u003e- spare tip for soldering iron: series N9 ..:\u003cbr\/\u003e- spare attachments for hot air pump: series N79 ..\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters :\u003cbr\/\u003e\u003cbr\/\u003e- voltage: 220-240V AC \/ 50Hz\u003cbr\/\u003e- total power consumption max. 360W\u003cbr\/\u003e- soldering iron: 24VAC, 60W\u003cbr\/\u003e- hot air pump: 300W\u003cbr\/\u003e- temperature setting range: soldering iron: 50-480°C, hot air pump: 100-500°C\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePackage contents :\u003cbr\/\u003e\u003cbr\/\u003e- service station ZD-8922\u003cbr\/\u003e- 3 × interchangeable extensions series 79 (diameters 4; 7; 12mm)\u003cbr\/\u003e- storage holders for solder and blower\u003cbr\/\u003e- operating instructions","brand":"ZHONGDI","offers":[{"title":"Default Title","offer_id":52541852287314,"sku":"06520026","price":2490.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06520026.png?v=1776145465"},{"product_id":"odpajeci-stanice-zd-8965","title":"Desoldering station ZD-8965","description":"The ZD-8965 desoldering station with temperature control and an adjustable range of 160-480°C is designed specifically for lead-free desoldering. Thanks to fast heating and high performance, this station is suitable for clean desoldering of all types of printed circuit components. With its cleverly designed structure, one-handed operation and high performance, it is easy to remove (aspirate) solder from single or double-sided printed circuit boards. This suction desoldering station is used in electronic research, teaching and manufacturing, mainly in the repair of electronic devices and communication equipment.\u003cbr\/\u003eThe desoldering station is automatically controlled by a microprocessor. Digital control electronics and a high-quality heat exchange system ensure precise temperature regulation of the soldering tip. The heating element uses a PTC thermistor and electronics with a feedback sensor of the soldering tip temperature can quickly and accurately control the desoldering temperature.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- large, readable LED display for easy temperature setting\u003cbr\/\u003e- compact and ergonomic design\u003cbr\/\u003e- quick heating to working temperature in a few seconds.\u003cbr\/\u003e- ergonomic head with pistol grip\u003cbr\/\u003e- quick and easy replacement of N5 tips\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e1) Station ZD-8965\u003cbr\/\u003e- input voltage: 220 - 240V AC, 50Hz\u003cbr\/\u003e- nominal power: 140W\u003cbr\/\u003e\u003cbr\/\u003e2) Desoldering gun ZD-553P\u003cbr\/\u003e- supply voltage of the heating element: 24V, 80W\u003cbr\/\u003e- temperature: 160 - 480°C\u003cbr\/\u003e\u003cbr\/\u003ePackage contents:\u003cbr\/\u003e- control unit ZD-8965\u003cbr\/\u003e- desoldering gun ZD-553P\u003cbr\/\u003e- 3 pcs of suction tips with holes of diameter 0.8mm (type N5-2), 1.0mm (type N5-1), 1.3mm (type N5-3)\u003cbr\/\u003e- 3 pcs of wires for cleaning the tips\u003cbr\/\u003e- spare air filters (diam. 20.8mm +diam. 16.8mm)\u003cbr\/\u003e- spike cleaner, sponge","brand":"ZHONGDI","offers":[{"title":"Default Title","offer_id":52541918773586,"sku":"06520031","price":2890.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06520031_98e23c61-c30b-48c8-a0df-1bd08da28b56.png?v=1776148452"},{"product_id":"horkovzdusna-stanice-atten-st-8800d","title":"Hot Air Station ATTEN  ST-8800D","description":"The ST-8800D benchtop service station with display has a temperature range of 100°C - 500°C. This makes it ideal for desoldering sensitive SMD circuits such as QFP, PLCC, SOJ, BGA, CHIP, etc. However, it is also suitable for many other applications where a concentrated flow of hot air is important, such as cleaning 3D printers, hot mounting, heating materials during maintenance or assembly. Suitable for fast and accurate reheating or blowing off of components during service interventions, for workshops or service workplaces where variability and good air and temperature control are required.\u003cbr\/\u003eTemperature can be set on the LCD display, quick warm up to operating temperature. The air quantity can be regulated continuously by controlling the mebran pump and using the four different spikes included. Three programmable quick settings for temperature and air flow - the user can have three combinations ready for different types of work.\u003cbr\/\u003eThe handle is equipped with non-slip rubber to offer greater comfort and ease of handling. The handle of the heat gun has a built-in sensor. As soon as you pick it up, it immediately goes into working mode, and as soon as you return it to the holder, it goes into standby mode. The automatic standby function saves energy significantly.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- Digital display: large clear LCD display, easy to adjust temperature\/air.\u003cbr\/\u003e- Temperature control: the user can accurately set the desired temperature from 100 °C to 500 °C, which is ideal for different types of components\u003cbr\/\u003e- infinitely adjustable hot air quantity\u003cbr\/\u003e- can be used for blowing and soldering SMD circuits with solder paste\u003cbr\/\u003e- Automatic sleep function activates when the hot air gun is placed on the stand\u003cbr\/\u003e- has an independent cold air function, can be used for special purposes\u003cbr\/\u003e- compatibility of interchangeable attachments\u003cbr\/\u003e- 4 pcs of interchangeable attachments 3,1 + 6 + 8 + 10 mm diameter ( types: A-2102,A-2104,A-2105,A-2131) for concentrated air flow\u003cbr\/\u003e- automatically cooling system\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- operating voltage: 220-240V AC\/50Hz\u003cbr\/\u003e- power consumption (max.): 800 W\u003cbr\/\u003e- temperature (min.): 100 °C\u003cbr\/\u003e- temperature (max.): 500 °C\u003cbr\/\u003e- Temperature accuracy: ±35 °C\u003cbr\/\u003e- air volume adjustment range: 10% to 100%\u003cbr\/\u003e- Air diaphragm compressor capacity: 30 to 120 l\/min\u003cbr\/\u003e- three quick temperature buttons that can be set and stored.\u003cbr\/\u003e- Dimensions(LxWxH): 167 × 142 × 148 mm\u003cbr\/\u003e- weight: 1.56 kg\u003cbr\/\u003e- 4 × attachments (types: A-2102, A-2104, A-2105, A-2131)\u003cbr\/\u003e\u003cbr\/\u003ePackage contents :\u003cbr\/\u003e- Service station\u003cbr\/\u003e- 4 interchangeable attachments\u003cbr\/\u003e- storage stand\u003cbr\/\u003e","brand":"ATTEN","offers":[{"title":"Default Title","offer_id":52541942202706,"sku":"06520033","price":2560.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06520033_8d39f0c5-4860-442a-8e2d-bb66adb11d25.png?v=1776149231"},{"product_id":"pajeci-horkovzdusna-stanice-atten-st-8802","title":"Soldering \/ Hot Air Station ATTEN ST-8802","description":"The ST-8802 2 in 1 service station consists of a hot air station and a soldering station. It represents a very efficient and cost-effective solution. Two channels: soldering section (65 W) and hot air section (800 W), two temperature ranges, large digital LCD display that shows the set temperature and the current status of both channels. It is suitable for soldering and desoldering most types of IO and for repairing printed circuit boards or components. This instrument is used in electronic research, teaching, manufacturing and specially for repairing electronic equipment.\u003cbr\/\u003eThe combination of two functions in one device saves space and investment.\u003cbr\/\u003e\u003cbr\/\u003eThe hot air station is great for desoldering sensitive SMD circuits such as QFP, PLCC, SOJ, BGA, CHIP, etc. However, it is also suitable for many other applications where a concentrated flow of hot air is important, such as cleaning 3D printers, hot mounting, heating materials during maintenance or assembly. Suitable for fast and accurate reheating or blowing off of components during service interventions, for workshops or service workplaces where variability and good air and temperature control are required. Temperature can be set on the LCD display, quick warm up to operating temperature. The air quantity can be regulated continuously by controlling the diaphragm pump and by four different spikes, which are included. Three programmable quick settings for temperature and air flow - the user can have three combinations ready for different types of work. The handle is equipped with non-slip rubber to offer greater comfort and ease of handling. The handle of the heat gun has a built-in sensor. As soon as you pick it up, it immediately goes into working mode, and as soon as you return it to the holder, it goes into standby mode. The automatic standby function saves energy significantly.\u003cbr\/\u003e\u003cbr\/\u003eThe soldering station is equipped with digital temperature control and a clear display that makes it easy to monitor both set and actual temperature Thanks to its advanced features, LCD display and adjustable temperature, it offers comfort and efficiency for a wide range of electronic work. Temperature calibration controlled by microcontroller (MCU). Buttons (1, 2, 3) for presetting or switching frequently used temperature.\u003cbr\/\u003eThe user can easily change tips according to the type of solder joint, increasing the versatility of the station. Ergonomic soldering handle minimizes fatigue during extended use. Interchangeable tips from the T900 series. The soldering station is designed for soldering with adjustable tip temperature ranging from 80°C to 480°C is suitable for fine electronics work - SMD and conventional pin soldering, board repair, small device servicing, basting and prototyping in the home workshop, school and hobby electronic projects.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003eHot air station:\u003cbr\/\u003e- Digital display: large clear LCD display, easy to adjust temperature\/air.\u003cbr\/\u003e- Temperature control: the user can accurately set the desired temperature from 100 °C to 500 °C, which is ideal for different types of components.\u003cbr\/\u003e- infinitely adjustable hot air quantity\u003cbr\/\u003e- can be used for blowing and soldering SMD circuits with solder paste\u003cbr\/\u003e- Automatic sleep function activates when the hot air gun is placed on the stand\u003cbr\/\u003e- has an independent cold air function, can be used for special purposes\u003cbr\/\u003e- compatibility of interchangeable attachments\u003cbr\/\u003e- 4 pcs of interchangeable attachments 3,1 + 6 + 8 + 10 mm diameter ( types: A-2102,A-2104,A-2105,A-2131) for concentrated air flow\u003cbr\/\u003e- automatically cooling system\u003cbr\/\u003e\u003cbr\/\u003eSoldering station:\u003cbr\/\u003e- Digital temperature control with LCD display for clear display of current and set point\u003cbr\/\u003e- 65 W power - ensures fast heating and stable operation\u003cbr\/\u003e- adjustable temperature range: 80 to 480 °C\u003cbr\/\u003e- Temperature stability: ±2°C\u003cbr\/\u003e- Automatic standby and sleep function to protect the heating element, save energy and extend the life of the tool\u003cbr\/\u003e- Temperature lock and password setting to prevent unintentional changes to settings\u003cbr\/\u003e- three preset quick temperature selections (buttons \"1,2,3\") for repeated settings\u003cbr\/\u003e- audible alarm function\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- Dimensions(L x W x H): 210 × 150 × 125 mm\u003cbr\/\u003e- weight: 3.7 kg\u003cbr\/\u003e\u003cbr\/\u003eHot air station:\u003cbr\/\u003e- Operating voltage: 220-240V AC\/50Hz\u003cbr\/\u003e- power consumption (max.): 800 W\u003cbr\/\u003e- temperature (min.): 100 °C\u003cbr\/\u003e- temperature (max.): 500 °C\u003cbr\/\u003e- temperature accuracy: ±35 °C\u003cbr\/\u003e- air volume adjustment range: 10% to 100%\u003cbr\/\u003e- Air diaphragm compressor capacity: 30 to 120 l\/min\u003cbr\/\u003e- three quick temperature buttons that can be set and stored.\u003cbr\/\u003e\u003cbr\/\u003eSoldering station:\u003cbr\/\u003e- Power supply : 220 - 240V AC \/ 50Hz\u003cbr\/\u003e- Power input : 65 W\u003cbr\/\u003e- Temperature range : 80°C to 480°C\u003cbr\/\u003e- Handle model : SP-65\u003cbr\/\u003e- T900 series interchangeable tips\u003cbr\/\u003e","brand":"ATTEN","offers":[{"title":"Default Title","offer_id":52541942432082,"sku":"06520034","price":4190.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06520034_9eaae845-a109-437f-b642-868533af2749.png?v=1776149236"},{"product_id":"horkovzdusna-stanice-zd-939d","title":"Hot Air SMD Rework station ZD-939D","description":"The ZD-939D desktop service station with display has a temperature range of 160°C - 480°C. This makes it ideal for desoldering sensitive SMD circuits such as QFP, SOP, PLCC, SOJ, BGA, etc. It protects circuits from damage by static electricity and electric current. However, it can also be used in many other areas of application where a concentrated flow of hot air is important, e.g. when cleaning 3D printers, when hot-soldering, heating materials during maintenance or assembly. The temperature can be set on the LCD display, and it heats up quickly to operating temperature. The amount of air can be regulated continuously by regulating the membrane pump and using four different tips that are included in the delivery. Additional tips-extensions according to the shape of the SMD component can be purchased. The handle is equipped with anti-slip rubber, which offers greater comfort and makes handling easier. The handle of the heat gun has a built-in sensor. Once you pick it up, it will immediately go into working mode, and once you put it back into the holder, it will go into standby mode. The auto standby function saves a lot of energy.\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- digital display: clear LCD display shows the current tip temperature and allows precise temperature adjustment in the range from 160 °C to 480 °C\u003cbr\/\u003e- temperature control: the user can precisely set the desired temperature, which is ideal for different types of components\u003cbr\/\u003e- continuous adjustment of the amount of hot air\u003cbr\/\u003e- suitable for SMD circuits\u003cbr\/\u003e- compatibility of interchangeable attachments\u003cbr\/\u003e- 4 pcs of interchangeable attachments diameter 2.5 + 4.4 + 8 + 10 mm (types 79-3901, 79-3907, 79-3917, 79-3918) for concentrated air flow\u003cbr\/\u003e- can be used for blowing and soldering SMD circuits using solder paste\u003cbr\/\u003e- automatic cooling system\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- operating voltage: 220-240V AC\/50Hz\u003cbr\/\u003e- power consumption (max.): 320 W\u003cbr\/\u003e- temperature (min.): 160 °C\u003cbr\/\u003e- temperature (max.): 480 °C\u003cbr\/\u003e- dimensions: 165 × 150 × 229 mm\u003cbr\/\u003e- air diaphragm compressor capacity max. 24 l \/ min\u003cbr\/\u003e- 4 × attachments (types 79-3901, 79-3907, 79-3917, 79-3918)\u003cbr\/\u003e\u003cbr\/\u003ePackage contents:\u003cbr\/\u003e\u003cbr\/\u003e- ZD-939D service station\u003cbr\/\u003e- 4 interchangeable attachments\u003cbr\/\u003e- tweezers for picking up and removing ICs\u003cbr\/\u003e- storage stand","brand":"ZHONGDI","offers":[{"title":"Default Title","offer_id":53044044857682,"sku":"06520032","price":1899.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06520032.png?v=1776148579"},{"product_id":"horkovzdusna-stanice-zd-8968-kit","title":"Hot air station ZD-8968 KIT","description":"Hot air blower ZD-8968 + third hand ZD-11P.\u003cbr\/\u003e\u003cbr\/\u003eHot air blower ZD-8968 has a temperature range of 100°C - 500°C. This makes it perfect for desoldering sensitive SMD circuits such as SOIC, CHIP, PLCC, BGA, etc. But it is also applicable in a number of other areas of use where a concentrated flow of hot air is important, e.g. when cleaning 3D printers, during hot fitting, shrink tubing, heating materials during maintenance or assembly. The temperature can be set on the LED display. The amount of air can be smoothly regulated by regulating the fan speed and using the three different tips that are included in the delivery. Additional tips-extensions according to the shape of the SMD component can be purchased. The pen is equipped with a non-slip rubber handle that offers greater comfort and ease of handling. The handle of the heat gun has a built-in sensor. As soon as you pick it up, it immediately goes into working mode, and as soon as you return it to the holder, it goes into standby mode. The automatic standby function significantly saves energy.\u003cbr\/\u003e\u003cbr\/\u003eThird hand ZD-11P, use for any electronics, soldering, crafting, painting, replicas, figurines and hobby or any project that requires precision. Its design and features ensure safety and efficiency at work, making it an ideal choice for a wide range of users. It is therefore an ideal gift for DIYers.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eZD-8968 product parameters:\u003cbr\/\u003e\u003cbr\/\u003e- LED digital display for displaying the working temperature\u003cbr\/\u003e- continuously adjustable air temperature\u003cbr\/\u003e- continuous adjustment of the amount of hot air\u003cbr\/\u003e- 3 pcs of replaceable tips for concentrated air flow\u003cbr\/\u003e- integrated into a single device\u003cbr\/\u003e- can be used for blowing and for soldering SMD circuits using solder paste\u003cbr\/\u003e- sleep mode - when the handle is placed in the holder, the heating and after a while the fan is automatically switched off\u003cbr\/\u003e- high-quality heating element brings twice the work efficiency\u003cbr\/\u003e- the motor fan ensures a gentle air flow, a long service life and very low noise during operation\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters of ZD-8968:\u003cbr\/\u003e\u003cbr\/\u003e- operating voltage: 220-240V AC\/50Hz\u003cbr\/\u003e- power (max.): 300 W\u003cbr\/\u003e- temperature (min.): 100 °C\u003cbr\/\u003e- temperature (max.): 500 °C\u003cbr\/\u003e- weight: 1.2 kg\u003cbr\/\u003e- soldering pen type: desoldering iron\u003cbr\/\u003e- air pump capacity max. 20l\/min\u003cbr\/\u003e- 3 x attachment: diameter 4.4+8+12mm\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePackage contents :\u003cbr\/\u003e\u003cbr\/\u003e- hot air blower ZD-8968 with handle\u003cbr\/\u003e- 3 interchangeable attachments\u003cbr\/\u003e- storage rack\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eZD-11P product parameters:\u003cbr\/\u003e\u003cbr\/\u003e- includes 5 adjustable goosenecks, helper hands and 1 clamp.\u003cbr\/\u003e- dimensions of the base: 210 × 134 mm, height of the metal rod: 250 mm.\u003cbr\/\u003e- each part has its own screw and can be moved to the required position.\u003cbr\/\u003e- clamp and flashlight (AA batteries, not included) will make your work easier. Very suitable for difficult soldering, for repairing model airplanes.\u003cbr\/\u003e- 4 insulated alligator clips rotate 360 ??degrees for various sized components and boards, ideal for holding circuit boards, wires and more\u003cbr\/\u003e- extremely heat resistant","brand":"ZHONGDI","offers":[{"title":"Default Title","offer_id":53044234813778,"sku":"06520030","price":1990.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06520030_b9360799-9a33-414d-8750-3f99e5f7593c.png?v=1776148097"},{"product_id":"horkovzdusna-stanice-zd-8968","title":"Hot air station ZD-8968","description":"Hot air blower ZD-8968 has a temperature range of 100°C - 500°C. This makes it perfect for desoldering sensitive SMD circuits such as SOIC, CHIP, PLCC, BGA, etc. But it is also applicable in a number of other areas of use where a concentrated flow of hot air is important, e.g. when cleaning 3D printers, during hot fitting, shrink tubing, heating materials during maintenance or assembly. The temperature can be set on the LED display. The amount of air can be smoothly regulated by regulating the fan speed and using the three different tips that are included in the delivery. Additional tips-extensions according to the shape of the SMD component can be purchased. The pen is equipped with a non-slip rubber handle that offers greater comfort and ease of handling. The handle of the heat gun has a built-in sensor. As soon as you pick it up, it immediately goes into working mode, and as soon as you return it to the holder, it goes into standby mode. The automatic standby function significantly saves energy.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- LED digital display for displaying the working temperature\u003cbr\/\u003e- continuously adjustable air temperature\u003cbr\/\u003e- continuous adjustment of the amount of hot air\u003cbr\/\u003e- 3 pcs of replaceable tips for concentrated air flow\u003cbr\/\u003e- integrated into a single device\u003cbr\/\u003e- can be used for blowing and for soldering SMD circuits using solder paste\u003cbr\/\u003e- sleep mode - when the handle is placed in the holder, the heating and after a while the fan is automatically switched off\u003cbr\/\u003e- high-quality heating element brings twice the work efficiency\u003cbr\/\u003e- the motor fan ensures a gentle air flow, a long service life and very low noise during operation\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- operating voltage: 220-240V AC\/50Hz\u003cbr\/\u003e- power (max.): 300 W\u003cbr\/\u003e- temperature (min.): 100 °C\u003cbr\/\u003e- temperature (max.): 500 °C\u003cbr\/\u003e- weight: 1.2 kg\u003cbr\/\u003e- soldering pen type: desoldering iron\u003cbr\/\u003e- air pump capacity max. 20l\/min\u003cbr\/\u003e- 3 x attachment: diameter 4.4+8+12mm\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePackage contents :\u003cbr\/\u003e\u003cbr\/\u003e- hot air blower ZD-8968 with handle\u003cbr\/\u003e- 3 interchangeable attachments\u003cbr\/\u003e- storage rack","brand":"ZHONGDI","offers":[{"title":"Default Title","offer_id":53044354384210,"sku":"06520029","price":1590.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06520029_ff4501bb-0cf2-4bb2-87d5-bb66b0fef61f.png?v=1776148096"}],"url":"https:\/\/tipa-production.myshopify.com\/en\/collections\/servisni-stanice.oembed","provider":"TIPA","version":"1.0","type":"link"}