{"title":"Sets for water heaters","description":"","products":[{"product_id":"sada-pro-ohrev-vody-geti-gwh01-2730w-6x-pv-trina","title":"Set for photovoltaic water heating GETI GWH01 2730W 6x PV Trina","description":"Set for easy installation of water heating in boilers and other devices.\u003cbr\/\u003e\u003cbr\/\u003eThe kit consists of Trina Solar monocrystalline panels ( 6x 04280478 ) of 455W each, a GETI controller GWH01 4000W ( 1x 04290246 ) and a complete 25m long wiring harness ( 25x 04290190 + 25x 04290189 ) with included MC4 connectors ( 2x 03360241 + 2x 03360240 ).\u003cbr\/\u003e\u003cbr\/\u003ePlease note: The GETI GWH inverter is only suitable for resistive loads with a bimetal thermostat (not suitable for electronically controlled thermostats!).\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eThe GETI GWH01 inverter is equipped with an LED panel that informs the user about the current status of the inverter. :\u003cbr\/\u003e- indication of water heating from PV panels\u003cbr\/\u003e- indication of water heating from 230V AC mains\u003cbr\/\u003e- comparison indication\u003cbr\/\u003e- fault status indication\u003cbr\/\u003e\u003cbr\/\u003eThe maximum output of the controller is 4000W, the controller has a priority input from the PV panels and if this voltage drops below 120V the water heating will be supplied from the 230V AC mains voltage.\u003cbr\/\u003e\u003cbr\/\u003eThis is an oversized item. Delivery time from order creation may be extended by 3-4 business days.\u003cbr\/\u003e\u003cbr\/\u003eSpecifications:\u003cbr\/\u003e\u003cbr\/\u003eSOLAR CONTROLLER GETI GWH01\u003cbr\/\u003e\u003cbr\/\u003e- input voltage (VDC): 160 to 350 (VDC)\u003cbr\/\u003e- Input voltage (VAC): 230 V AC\u003cbr\/\u003e- output voltage [VAC]: 230 V AC (VAC)\u003cbr\/\u003e- maximum power: 4000 W\u003cbr\/\u003e- MPPT function: YES\u003cbr\/\u003e- PV panel connection: series or series-parallel\u003cbr\/\u003e- Priority input: PV panels\u003cbr\/\u003e- backup input: 230V AC mains\u003cbr\/\u003e- operating temperature: -25 °C ~ +55 °C\u003cbr\/\u003e- efficiency: \u003e 99%\u003cbr\/\u003e- cooling: passive\u003cbr\/\u003e- input short circuit protection\u003cbr\/\u003e- overtemperature protection\u003cbr\/\u003e- PV panel input connection: MC4 connectors\u003cbr\/\u003e- 230V AC input connection: screw terminal\u003cbr\/\u003e- 230V AC output connection: screw terminal\u003cbr\/\u003e- Material: aluminium\u003cbr\/\u003e- degree of protection: IP65\u003cbr\/\u003e- Dimensions d x w x h [mm]: 250 x 155 x 80 mm\u003cbr\/\u003e- weight: 3 kg\u003cbr\/\u003e\u003cbr\/\u003eTrina Solar photovoltaic panel\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- Nominal power: 455 W\u003cbr\/\u003e- type: N-type, Topcon, monocrystalline\u003cbr\/\u003e- module efficiency: 22,8 %\u003cbr\/\u003e- maximum current (Imp): 10,11 A\u003cbr\/\u003e- Maximum supply voltage (Vmp): 45 V\u003cbr\/\u003e- Voltage at no-load (Voc): 53,4 V\u003cbr\/\u003e- Short-circuit current (ISC): 10,77 A\u003cbr\/\u003e- Maximum system voltage: 1500 VDC (IEC)\u003cbr\/\u003e- Connector type: MC4\/MC4 compatible\u003cbr\/\u003e- Front glass: 1.6 mm thermally reinforced glass with high transparency\u003cbr\/\u003e- degree of protection: IP68\u003cbr\/\u003e- Number of cells: 144\u003cbr\/\u003e- Dimensions: 1762 x 1134 x 30 mm\u003cbr\/\u003e- weight: 21 kg\u003cbr\/\u003e- frame: anodised aluminium alloy\u003cbr\/\u003e- frame colour: black\u003cbr\/\u003e\u003cbr\/\u003eWARNING!    The system is designed for resistive loads only.\u003cbr\/\u003e\u003cbr\/\u003eThe set includes:\u003cbr\/\u003e6 Trina Solar monocrystalline PV panels\u003cbr\/\u003eSolar controller GETI GWH01\u003cbr\/\u003eCable set 25 meters\u003cbr\/\u003eMC4 connectors\u003cbr\/\u003eInstallation instructions\u003cbr\/\u003e\u003cbr\/\u003e\u003cimg src=\"https:\/\/img.tipa.eu\/fotocache\/gallery\/images\/gallery\/clanky\/seznamProdDet.jpg\" width=\"500\" height=\"500\" alt=\"\" \/\u003e\u003cimg src=\"https:\/\/img.tipa.eu\/fotocache\/gallery\/images\/gallery\/clanky\/mapaProdDet.jpg\" width=\"500\" height=\"500\" align=\"top\" alt=\"\" \/\u003e","brand":"GETI","offers":[{"title":"Default Title","offer_id":52980196180306,"sku":"04291258","price":22950.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04291258.png?v=1776149834"},{"product_id":"sada-pro-fotovoltaicky-ohrev-vody-geti-gwh02d-2730w-pv-trina","title":"Photovoltaic water heating kit GETI GWH02D 2730W PV Trina","description":"Set for easy installation of water heating in boilers and other devices.\u003cbr\/\u003e\u003cbr\/\u003eThe kit consists of 6 Trina mono-crystalline panels ( 6x 04280478 ) with 455W each, a GETI controller GWH02D 4000W ( 1x 04291121 ) and a complete 25 meters of cabling ( 25x 04290190 + 25x 04290189 ) with MC4 connectors ( 2x 03360241 + 2x 03360240 ).\u003cbr\/\u003e\u003cbr\/\u003ePlease note: The GETI GWH inverter is only suitable for resistive loads with a bimetal thermostat (not suitable for electronically controlled thermostats!).\u003cbr\/\u003e                       The output of the inverter (L, N) must not be connected to the mains or earth! The inverter output must not be connected to a TN-C system.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eThe inverter is equipped with a large easy to understand LED display, a 3m temperature sensor and independent temperature setting for heating water from both PV and AC mains. The GETI inverter also has a forced heating function. The inverter is compatible with most boilers on the market.\u003cbr\/\u003e\u003cbr\/\u003eThe system is simple , it only requires the connection of an appropriate number of PV panels with a maximum output of 4000 W with an operating voltage of 160 ~ 350V DC, 230C AC mains voltage and connection to a resistive load, e.g. heating coil, electric boiler, electric radiator or underfloor heating and circuit breakers.\u003cbr\/\u003e\u003cbr\/\u003eThe DC current generated in the panels, which cannot be fed directly to the heating equipment, is converted in the inverter into AC current which can be used to power the heating equipment.\u003cbr\/\u003e\u003cbr\/\u003eThe maximum output of the system is 4000 W. The inverter has a priority input from the photovoltaic panels and in case of power shortage on these panels, the system is backed up by 230V AC mains power.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eThis is an oversized item. Delivery time from order creation can be extended by 3-4 working days.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- solar inverter for hot water heating with resistive load (heating coil, boiler)\u003cbr\/\u003e- temperature sensor\u003cbr\/\u003e- separate temperature setting for heating water from PV or AC mains\u003cbr\/\u003e- automatic switching between networks (PV \/ 230V AC network)\u003cbr\/\u003e- operating modes: PV only as an island system or or automatic mode PV + grid\u003cbr\/\u003e- silent operation for passive cooling\u003cbr\/\u003e- efficient monitoring of the maximum power output on the panels using MPPT\u003cbr\/\u003e- high efficiency \u003e 99%\u003cbr\/\u003e\u003cbr\/\u003eThe GETI GWH02D inverter is equipped with a clear LED display that informs the user of the current and set values:\u003cbr\/\u003e\u003cbr\/\u003e- Indication of water heating from PV panels\u003cbr\/\u003e- 230V AC mains water heating indication\u003cbr\/\u003e- water temperature (PV,AC) current and set\u003cbr\/\u003e- PV power\u003cbr\/\u003e- PV voltage\u003cbr\/\u003e- comparison indication\u003cbr\/\u003e- error status indication\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- Input voltage (VDC): 160 to 350 (VDC)\u003cbr\/\u003e- Input voltage (VAC): 230 V AC\u003cbr\/\u003e- output voltage [VAC]: 0-260 VAC (VAC)\u003cbr\/\u003e- Maximum power: 4000 W\u003cbr\/\u003e- PV input current: 20A max.\u003cbr\/\u003e- 20A max.\u003cbr\/\u003e- Load type: resistive with bimetal thermostat (not suitable for electronically controlled thermostats!)\u003cbr\/\u003e- The value of the resistive load must not be less than 13 Ohm\u003cbr\/\u003e- MPPT function: YES\u003cbr\/\u003e- PV panel connection: series or series-parallel\u003cbr\/\u003e- Priority input: PV panels\u003cbr\/\u003e- backup input: 230V AC mains\u003cbr\/\u003e- operating temperature: -25 °C ~ +55 °C\u003cbr\/\u003e- efficiency: \u003e 99%\u003cbr\/\u003e- Length of temperature sensor: 3m\u003cbr\/\u003e- cooling: passive\u003cbr\/\u003e- input short circuit protection\u003cbr\/\u003e- overheating protection\u003cbr\/\u003e- PV panel input connection: MC4 connectors\u003cbr\/\u003e- 230V AC input connection: screw terminal\u003cbr\/\u003e- 230V AC output connection: screw terminal\u003cbr\/\u003e- Material: aluminium + metal\u003cbr\/\u003e- degree of protection: IP65\u003cbr\/\u003e- Dimensions d x w x h [mm]: 255 x 201 x 95 mm\u003cbr\/\u003e- weight: 3 kg\u003cbr\/\u003e\u003cbr\/\u003ePhotovoltaic panel 455W Trina Solar\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- Rated power: 455 W\u003cbr\/\u003e- type: N-type, Topcon, monocrystalline\u003cbr\/\u003e- module efficiency: 22,8 %\u003cbr\/\u003e- maximum current (Imp): 10,11 A\u003cbr\/\u003e- Maximum supply voltage (Vmp): 45 V\u003cbr\/\u003e- Voltage at no-load (Voc): 53,4 V\u003cbr\/\u003e- Short-circuit current (ISC): 10,77 A\u003cbr\/\u003e- Maximum system voltage: 1500 VDC (IEC)\u003cbr\/\u003e- Connector type: MC4\/MC4 compatible\u003cbr\/\u003e- Front glass: 1.6 mm thermally reinforced glass with high transparency\u003cbr\/\u003e- degree of protection: IP68\u003cbr\/\u003e- Number of cells: 144\u003cbr\/\u003e- Dimensions: 1762 x 1134 x 30 mm\u003cbr\/\u003e- weight: 21 kg\u003cbr\/\u003e- frame: anodised aluminium alloy\u003cbr\/\u003e- frame colour: black\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eWARNING!    The system is designed for resistive loads only.\u003cbr\/\u003e\u003cbr\/\u003e- It is recommended that only an electrician with the appropriate qualifications for working with electrical equipment and experience with photovoltaic systems perform the installation and wiring.\u003cbr\/\u003e\u003cbr\/\u003eThe kit includes:\u003cbr\/\u003e\u003cbr\/\u003e6 monocrystalline PV panels 4558Wp Trina\u003cbr\/\u003eSolar controller GETI GWH02D\u003cbr\/\u003eCable set 25 meters\u003cbr\/\u003eMC4 connectors\u003cbr\/\u003eInstallation instructions\u003cbr\/\u003e\u003cbr\/\u003e\u003cimg src=\"https:\/\/img.tipa.eu\/fotocache\/gallery\/images\/gallery\/clanky\/seznamProdDet.jpg\" width=\"500\" height=\"500\" alt=\"\" \/\u003e\u003cimg src=\"https:\/\/img.tipa.eu\/fotocache\/gallery\/images\/gallery\/clanky\/mapaProdDet.jpg\" width=\"500\" height=\"500\" align=\"top\" alt=\"\" \/\u003e","brand":"GETI","offers":[{"title":"Default Title","offer_id":52980196278610,"sku":"04291259","price":22900.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04291259.png?v=1776149834"},{"product_id":"sada-pro-fotovoltaicky-ohrev-vody-geti-gwh02d-2275w-pv-trina","title":"Set for Photovoltaic water heating GETI GWH02D 2275W PV Trina","description":"Set for easy installation of water heating in boilers and other devices.\u003cbr\/\u003e\u003cbr\/\u003eThe kit consists of 5 Trina mono-crystalline panels ( 5x 04280478 ) with 455W each, a GETI controller GWH02D 4000W ( 1x 04291121 ) and a complete 25 meters of cabling ( 25x 04290190 + 25x 04290189 ) with MC4 connectors attached ( 2x 03360241 + 2x 03360240 ).\u003cbr\/\u003e\u003cbr\/\u003ePlease note: The GETI GWH inverter is only suitable for resistive loads with a bimetal thermostat (not suitable for electronically controlled thermostats!).\u003cbr\/\u003e                       The output of the inverter (L, N) must not be connected to the mains or earth! The inverter output must not be connected to a TN-C system.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eThe inverter is equipped with a large easy to understand LED display, a 3m temperature sensor and independent temperature setting for heating water from both PV and AC mains. The GETI inverter also has a forced heating function. The inverter is compatible with most boilers on the market.\u003cbr\/\u003e\u003cbr\/\u003eThe system is simple , it only requires the connection of an appropriate number of PV panels with a maximum output of 4000 W with an operating voltage of 160 ~ 350V DC, 230C AC mains voltage and connection to a resistive load, e.g. heating coil, electric boiler, electric radiator or underfloor heating and circuit breakers.\u003cbr\/\u003e\u003cbr\/\u003eThe DC current generated in the panels, which cannot be fed directly to the heating equipment, is converted in the inverter into AC current which can be used to power the heating equipment.\u003cbr\/\u003e\u003cbr\/\u003eThe maximum output of the system is 4000 W. The inverter has a priority input from the photovoltaic panels and in case of power shortage on these panels, the system is backed up by 230V AC mains power.\u003cbr\/\u003e\u003cbr\/\u003eThis is an oversized item. Delivery time from order creation can be extended by 3-4 working days.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- solar inverter for hot water heating with resistive load (heating coil, boiler)\u003cbr\/\u003e- temperature sensor\u003cbr\/\u003e- separate temperature setting for heating water from PV or AC mains\u003cbr\/\u003e- automatic switching between networks (PV \/ 230V AC network)\u003cbr\/\u003e- operating modes: PV only as an island system or or automatic mode PV + grid\u003cbr\/\u003e- silent operation for passive cooling\u003cbr\/\u003e- efficient monitoring of the maximum power output on the panels using MPPT\u003cbr\/\u003e- high efficiency \u003e 99%\u003cbr\/\u003e\u003cbr\/\u003eThe GETI GWH02D inverter is equipped with a clear LED display that informs the user of the current and set values:\u003cbr\/\u003e\u003cbr\/\u003e- Indication of water heating from PV panels\u003cbr\/\u003e- 230V AC mains water heating indication\u003cbr\/\u003e- water temperature (PV,AC) current and set\u003cbr\/\u003e- PV power\u003cbr\/\u003e- PV voltage\u003cbr\/\u003e- comparison indication\u003cbr\/\u003e- error status indication\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- Input voltage (VDC): 160 to 350 (VDC)\u003cbr\/\u003e- Input voltage (VAC): 230 V AC\u003cbr\/\u003e- output voltage [VAC]: 0-260 VAC (VAC)\u003cbr\/\u003e- Maximum power: 4000 W\u003cbr\/\u003e- PV input current: 20A max.\u003cbr\/\u003e- 20A max.\u003cbr\/\u003e- Load type: resistive with bimetal thermostat (not suitable for electronically controlled thermostats!)\u003cbr\/\u003e- The value of the resistive load must not be less than 13 Ohm\u003cbr\/\u003e- MPPT function: YES\u003cbr\/\u003e- PV panel connection: series or series-parallel\u003cbr\/\u003e- Priority input: PV panels\u003cbr\/\u003e- backup input: 230V AC mains\u003cbr\/\u003e- operating temperature: -25 °C ~ +55 °C\u003cbr\/\u003e- efficiency: \u003e 99%\u003cbr\/\u003e- Length of temperature sensor: 3m\u003cbr\/\u003e- cooling: passive\u003cbr\/\u003e- input short circuit protection\u003cbr\/\u003e- overheating protection\u003cbr\/\u003e- PV panel input connection: MC4 connectors\u003cbr\/\u003e- 230V AC input connection: screw terminal\u003cbr\/\u003e- 230V AC output connection: screw terminal\u003cbr\/\u003e- Material: aluminium + metal\u003cbr\/\u003e- degree of protection: IP65\u003cbr\/\u003e- Dimensions d x w x h [mm]: 255 x 201 x 95 mm\u003cbr\/\u003e- weight: 3 kg\u003cbr\/\u003e\u003cbr\/\u003ePhotovoltaic panel 455W Trina Solar\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- Rated power: 455 W\u003cbr\/\u003e- type: N-type, Topcon, monocrystalline\u003cbr\/\u003e- module efficiency: 22,8 %\u003cbr\/\u003e- maximum current (Imp): 10,11 A\u003cbr\/\u003e- Maximum supply voltage (Vmp): 45 V\u003cbr\/\u003e- Voltage at no-load (Voc): 53,4 V\u003cbr\/\u003e- Short-circuit current (ISC): 10,77 A\u003cbr\/\u003e- Maximum system voltage: 1500 VDC (IEC)\u003cbr\/\u003e- Connector type: MC4\/MC4 compatible\u003cbr\/\u003e- Front glass: 1.6 mm thermally reinforced glass with high transparency\u003cbr\/\u003e- degree of protection: IP68\u003cbr\/\u003e- Number of cells: 144\u003cbr\/\u003e- Dimensions: 1762 x 1134 x 30 mm\u003cbr\/\u003e- weight: 21 kg\u003cbr\/\u003e- frame: anodised aluminium alloy\u003cbr\/\u003e- frame colour: black\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eWARNING!    The system is designed for resistive loads only.\u003cbr\/\u003e\u003cbr\/\u003e- It is recommended that only an electrician with the appropriate qualifications for working with electrical equipment and experience with photovoltaic systems perform the installation and wiring.\u003cbr\/\u003e\u003cbr\/\u003eThe kit includes:\u003cbr\/\u003e\u003cbr\/\u003e5 monocrystalline PV panels 455Wp Trina\u003cbr\/\u003eSolar controller GETI GWH02D\u003cbr\/\u003eCable set 25 meters\u003cbr\/\u003eMC4 connectors\u003cbr\/\u003eInstallation instructions\u003cbr\/\u003e\u003cbr\/\u003e\u003cimg src=\"https:\/\/img.tipa.eu\/fotocache\/gallery\/images\/gallery\/clanky\/seznamProdDet.jpg\" width=\"500\" height=\"500\" alt=\"\" \/\u003e\u003cimg src=\"https:\/\/img.tipa.eu\/fotocache\/gallery\/images\/gallery\/clanky\/mapaProdDet.jpg\" width=\"500\" height=\"500\" align=\"top\" alt=\"\" \/\u003e","brand":"GETI","offers":[{"title":"Default Title","offer_id":53037947748690,"sku":"04291261","price":20399.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04291261.png?v=1777012535"},{"product_id":"sada-pro-fotovoltaicky-ohrev-vody-geti-gwh01-2275w-5x-pv-trina","title":"Set for Photovoltaic water heating GETI GWH01 2275W 5x PV Trina","description":"Set for easy installation of water heating in boilers and other devices.\u003cbr\/\u003e\u003cbr\/\u003eThe kit consists of Trina Solar TSM-NEG9R.28 monocrystalline panels, Vertex S+ Dual Glass N-Type ( 5x 04280455 ) of 455W each, GETI controller GWH01 4000W ( 1x 04290246 ) and a complete 25m long wiring harness ( 25x 04290190 + 25x 04290189 ) with included MC4 connectors ( 2x 03360241 + 2x 03360240 ).\u003cbr\/\u003e\u003cbr\/\u003ePlease note: The GETI GWH inverter is only suitable for resistive loads with a bimetal thermostat (not suitable for electronically controlled thermostats!).\u003cbr\/\u003e\u003cbr\/\u003eThe system is simple, requiring only the connection of 5 photovoltaic panels with an operating voltage of approx. 34V or the corresponding number of others to the GWH01 controller and energy loads ( boiler, heating coil, electric boiler, underfloor heating, etc.).\u003cbr\/\u003e\u003cbr\/\u003eThe GETI GWH01 inverter is equipped with an LED panel that informs the user about the current status of the inverter. :\u003cbr\/\u003e- indication of water heating from PV panels\u003cbr\/\u003e- indication of water heating from 230V AC mains\u003cbr\/\u003e- comparison indication\u003cbr\/\u003e- fault status indication\u003cbr\/\u003e\u003cbr\/\u003eThe maximum output of the controller is 4000W, the controller has a priority input from the PV panels and if this voltage drops below 120V the water heating will be supplied from the 230V AC mains voltage.\u003cbr\/\u003e\u003cbr\/\u003eThis is an oversized item. Delivery time from order creation may be extended by 3-4 business days.\u003cbr\/\u003e\u003cbr\/\u003eSpecifications:\u003cbr\/\u003e\u003cbr\/\u003eSOLAR CONTROLLER GETI GWH01\u003cbr\/\u003e\u003cbr\/\u003e- input voltage (VDC): 160 to 350 (VDC)\u003cbr\/\u003e- Input voltage (VAC): 230 V AC\u003cbr\/\u003e- output voltage [VAC]: 230 V AC (VAC)\u003cbr\/\u003e- maximum power: 4000 W\u003cbr\/\u003e- MPPT function: YES\u003cbr\/\u003e- PV panel connection: series or series-parallel\u003cbr\/\u003e- Priority input: PV panels\u003cbr\/\u003e- backup input: 230V AC mains\u003cbr\/\u003e- operating temperature: -25 °C ~ +55 °C\u003cbr\/\u003e- efficiency: \u003e 99%\u003cbr\/\u003e- cooling: passive\u003cbr\/\u003e- input short circuit protection\u003cbr\/\u003e- overtemperature protection\u003cbr\/\u003e- PV panel input connection: MC4 connectors\u003cbr\/\u003e- 230V AC input connection: screw terminal\u003cbr\/\u003e- 230V AC output connection: screw terminal\u003cbr\/\u003e- Material: aluminium\u003cbr\/\u003e- degree of protection: IP65\u003cbr\/\u003e- Dimensions d x w x h [mm]: 250 x 155 x 80 mm\u003cbr\/\u003e- weight: 3 kg\u003cbr\/\u003e\u003cbr\/\u003ePhotovoltaic panel Trina Solar TSM-NEG9R.28, Vertex S+ Dual Glass N-Type\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- Nominal power: 455 W\u003cbr\/\u003e- Type: N-type, Topcon, monocrystalline\u003cbr\/\u003e- module efficiency: 22,5 %\u003cbr\/\u003e- maximum current (Imp): 10,09 A\u003cbr\/\u003e- Maximum supply voltage (Vmp): 44,6 V\u003cbr\/\u003e- No-load voltage (Voc): 52,9 V\u003cbr\/\u003e- Short-circuit current (ISC): 10,74 A\u003cbr\/\u003e- Maximum system voltage: 1500 VDC (IEC)\u003cbr\/\u003e- Connector type: MC4\/MC4 compatible\u003cbr\/\u003e- Front glass: 1.6 mm thermally reinforced glass with high transparency\u003cbr\/\u003e- degree of protection: IP68.\u003cbr\/\u003e- 144 cell count.\u003cbr\/\u003e- Dimensions: 1762 x 1134 x 30 mm\u003cbr\/\u003e- weight: 21 kg\u003cbr\/\u003e- frame: anodized aluminium alloy\u003cbr\/\u003e- frame colour: black\u003cbr\/\u003e\u003cbr\/\u003eWARNING!    The system is designed for resistive loads only.\u003cbr\/\u003e\u003cbr\/\u003eThe set includes:\u003cbr\/\u003e5 Trina Solar monocrystalline PV panels\u003cbr\/\u003eSolar controller GETI GWH01\u003cbr\/\u003eCable set 25 meters\u003cbr\/\u003eMC4 connectors\u003cbr\/\u003eInstallation instructions\u003cbr\/\u003e\u003cbr\/\u003e\u003cimg src=\"https:\/\/img.tipa.eu\/fotocache\/gallery\/images\/gallery\/clanky\/seznamProdDet.jpg\" width=\"500\" height=\"500\" alt=\"\" \/\u003e\u003cimg src=\"https:\/\/img.tipa.eu\/fotocache\/gallery\/images\/gallery\/clanky\/mapaProdDet.jpg\" width=\"500\" height=\"500\" align=\"top\" alt=\"\" \/\u003e","brand":"GETI","offers":[{"title":"Default Title","offer_id":53037947846994,"sku":"04291262","price":20399.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04291262.png?v=1777012543"}],"url":"https:\/\/tipa-production.myshopify.com\/en\/collections\/sestavy-pro-ohrev-vody.oembed","provider":"TIPA","version":"1.0","type":"link"}