{"product_id":"casovac-spinac-programovatelny-s-rele","title":"Timer switch programmable with relay","description":"Universal time switch with 12V relay output and a wide range of settings.\u003cbr\/\u003e\u003cbr\/\u003eWorking modes:\u003cbr\/\u003eP1 – after the input pulse, the relay is switched on for the set time. This mode has even more setting options:\u003cbr\/\u003eP1.1 – only the first trigger pulse is active\u003cbr\/\u003eP1.2 – active every pulse after the set time\u003cbr\/\u003eP1.3 – the first pulse starts the switch-on time countdown, with the next pulse, the switch-on time can be shortened even before the set time has expired.\u003cbr\/\u003eP2 – after the input pulse, the module counts down the set time T1 (\"CP\" parameter), then turns on the relay for the set time T2 (\"OP\" parameter). This cycle will only happen once.\u003cbr\/\u003eP3.1 – cyclic repetition of the P2 mode, while the number of cycles can be set to 1–999 or infinity (\"LOP\" parameter, infinity = — on the display) The first pulse starts everything, the next pulse disconnects the clock\u003cbr\/\u003eP3.2 – P3.1 mode, but it is not necessary to start with an impulse. It is active as soon as the power is connected.\u003cbr\/\u003eP4 – the relay switches on the rising edge of the pulse and the countdown is started by the falling edge of the pulse. This mode is used for delayed shutdown of appliances, e.g. when lighting the staircase.\u003cbr\/\u003e\u003cbr\/\u003eSet parameters:\u003cbr\/\u003eOP – relay switching time\u003cbr\/\u003eCP – relay shutdown time\u003cbr\/\u003eLOP – number of cycles (1–999× or infinity – display ---)\u003cbr\/\u003ethese parameters are independent, but shared by each mode, i.e. that they will be the same in each mode.\u003cbr\/\u003e\u003cbr\/\u003eSetting the switch-on and switch-off time:\u003cbr\/\u003eXX.X = 0.1 – 99.9 sec\u003cbr\/\u003eXXX. = 1 – 999 sec\u003cbr\/\u003eXXX = 1 – 999 min\u003cbr\/\u003ee.g. for a time setting of 3.2 seconds, the display will show 03.2\u003cbr\/\u003ethe \"SET\" button is intended for setting all parameters. A short press activates the setting of OP, CL and LOP parameters, a long press activates modes P1 – P4. The selection is made with the \"UP\" and \"DOWN\" buttons.\u003cbr\/\u003e\u003cbr\/\u003eOperating parameters:\u003cbr\/\u003eSupply voltage 6-12V DC or Micro USB 5V (incorrectly printed 6-30V on the board)\u003cbr\/\u003eQuiescent current 20mA, in active state 50mA\u003cbr\/\u003eTrigger pulse 3–24V or GND (optional), the module is equipped with an optocoupler\u003cbr\/\u003ePreservation of the set parameters even when the power is turned off\u003cbr\/\u003eLED indication for switched on status\u003cbr\/\u003eWorking temperature -40°C ~ 85°C\u003cbr\/\u003eDimensions 62×38×17mm\u003cbr\/\u003e\u003cbr\/\u003eCOM is a contact that flips between NO and NC when voltage is applied to the coil.\u003cbr\/\u003eThe NO contact in the rest state is open compared to the COM contact\u003cbr\/\u003eNC is a contact in the rest state connected to the COM contact\u003cbr\/\u003eThe relay contacts are not connected to any voltage.\u003cbr\/\u003e\u003cbr\/\u003eThe product is not an independently functional unit, it requires professional assembly.","brand":"TIPA","offers":[{"title":"Default Title","offer_id":53044233077074,"sku":"09830311","price":45.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/09830311_25bff3d2-e3c3-4a3e-89f6-12683eb4ac2b.png?v=1776148054","url":"https:\/\/tipa-production.myshopify.com\/en\/products\/casovac-spinac-programovatelny-s-rele","provider":"TIPA","version":"1.0","type":"link"}