{"product_id":"chytra-nabijecka-baterii-bluesmart-12v-10a-ip65-dc-konektor","title":"Smart battery charger BlueSmart 12V\/10A IP65+DC connector","description":"Water and dust resistant charger with built-in Bluetooth technology, allowing you to display information from your charger to your smartphone, tablet or computer. Optimal for batteries with a capacity of 30-100Ah.\u003cbr\/\u003e\u003cbr\/\u003e-Built-in Bluetooth technology for setting, voltage and current display\u003cbr\/\u003e-Resistance to dust, water and chemicals\u003cbr\/\u003e-Intelligent seven-stage charging algorithm\u003cbr\/\u003e-Recovering a completely discharged \"dead\" battery\u003cbr\/\u003e-Auto power function\u003cbr\/\u003e-Resistant to low temperatures up to -30°C\u003cbr\/\u003e-Several additional features to increase battery life\u003cbr\/\u003e-Low power mode for charging small batteries\u003cbr\/\u003e-Special mode for charging Li-ion batteries\u003cbr\/\u003e\u003cbr\/\u003eBluetooth\u003cbr\/\u003eYou can set, view and configure the Blue Smart IP65 charger via your smartphone. You can view the charger and battery status. Even control the charger's functions with the VictronConnect app. The default value of voltage and current is displayed on the screen. You can download the app for iOS and Android here. You can also download the VictronConnect application for free from Google Play or the App Store.\u003cbr\/\u003e\u003cbr\/\u003eRegeneration\u003cbr\/\u003eA lead-acid battery that has already been undercharged or left discharged for days or weeks will deteriorate due to sulfation. If detected early, sulfation can sometimes be partially reversed by low-current charging before the battery reaches a higher voltage.\u003cbr\/\u003e \u003cbr\/\u003eRecovery function for fully discharged batteries\u003cbr\/\u003eMost reverse polarity protected chargers do not recognize batteries discharged to zero or near zero voltage and therefore will not start charging them. However, the Blue Power Charger will try to charge even a completely discharged battery with a low current and thus resume normal charging as soon as sufficient voltage appears on the battery terminals.\u003cbr\/\u003e \u003cbr\/\u003eUltra highly efficient \"green\" battery charger\u003cbr\/\u003eWith an efficiency of up to 95%, these chargers produce up to 4x less heat than the industry standard. When the battery is fully charged, the power consumption is reduced to 0.5W, which is 5x to 10x better than the common standard.\u003cbr\/\u003e \u003cbr\/\u003eLong service life, safety and quiet operation\u003cbr\/\u003e-Low temperature load of electronic components.\u003cbr\/\u003e-Protection against ingress of dust, water and chemicals.\u003cbr\/\u003e-Overheat protection: the output current will decrease as the temperature rises up to 60°C, but the charger will not fail.\u003cbr\/\u003e- The chargers are completely silent: they do not contain an active cooler (fan) or other moving parts.\u003cbr\/\u003e\u003cbr\/\u003eStorage mode: less corrosion of positive electrodes\u003cbr\/\u003eEven the lower sustain charging voltage that follows the absorption phase can cause grid corrosion. It is therefore absolutely necessary to continue reducing the charging voltage if the battery remains connected to the charger for more than 48 hours.\u003cbr\/\u003e \u003cbr\/\u003eCharging with temperature compensation\u003cbr\/\u003eThe optimal charging voltage for a lead-acid battery varies inversely with its temperature. The Blue Power IP65 Charger measures the ambient temperature during the test phase and compensates for it during charging. The temperature will be measured again when the charger is in low current mode during maintenance or storage. Therefore, there is no need for special settings for cold or hot environments.\u003cbr\/\u003e \u003cbr\/\u003eCharging mode for Li-ion batteries\u003cbr\/\u003eThe Blue Power Charger uses a special charging algorithm for Li-ion (LiFePO4) batteries, with automatic reset of undervoltage protection for Li-ion batteries.\u003cbr\/\u003e\u003cbr\/\u003eNormal charging voltage mode 14.4V - suitable for gel and AGM batteries. High charging voltage mode 14.7V - suitable for open top-up liquid batteries.\u003cbr\/\u003e\u003cbr\/\u003eTechnical data:\u003cbr\/\u003e Input voltage: 180 - 265 V alternating voltage (AC)\u003cbr\/\u003eFrequency: 45 – 65 Hz\u003cbr\/\u003eCharging current: 10 A\u003cbr\/\u003ePower consumption without load: 0.5 W\u003cbr\/\u003eAbsorption charging voltage: 14.4V\u003cbr\/\u003eTrickle charge voltage: 13.8V\u003cbr\/\u003eStorage Mode Voltage: 13.2V\u003cbr\/\u003eProtections: output polarity reversal, output short circuit, overheating\u003cbr\/\u003eOperating temperature range: from – 30 to + 50°C\u003cbr\/\u003eHumidity: maximum 95%\u003cbr\/\u003eBattery outlet: black and red cable 1.5 m long\u003cbr\/\u003e230 V AC input to charger: 1.5 m cable with classic plug\u003cbr\/\u003eDegree of protection: IP 65\u003cbr\/\u003ePlug type: CEE7\/7 (Schuko)\u003cbr\/\u003eWeight: 0.9 kg\u003cbr\/\u003eDimensions (height x width x length): 60 x 105 x 190 mm","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52541906747730,"sku":"04240565","price":2859.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04240565.png?v=1776147263","url":"https:\/\/tipa-production.myshopify.com\/en\/products\/chytra-nabijecka-baterii-bluesmart-12v-10a-ip65-dc-konektor","provider":"TIPA","version":"1.0","type":"link"}