{"product_id":"chytra-nabijecka-baterii-bluesmart-12v-25a-ip65-dc-konektor","title":"Smart battery charger BlueSmart 12V\/25A IP65+DC connector","description":"Water and dust resistant charger with built-in Bluetooth technology, allowing you to display information from your charger to your smartphone, tablet or computer. Optimal for batteries with a capacity of 100-265Ah.\u003cbr\/\u003e\u003cbr\/\u003eBuilt-in Bluetooth technology for setting, displaying voltage and current\u003cbr\/\u003eResistant to dust, water and chemicals\u003cbr\/\u003eIntelligent seven-stage charging algorithm\u003cbr\/\u003eRecovery of a completely discharged \"dead\" battery\u003cbr\/\u003eAutomatic power function\u003cbr\/\u003eResistant to low temperatures down to -30°C\u003cbr\/\u003eSeveral other functions increasing battery life\u003cbr\/\u003eLow power mode for charging small batteries\u003cbr\/\u003eSpecial mode for charging Li-ion batteries\u003cbr\/\u003e\u003cbr\/\u003eBluetooth\u003cbr\/\u003eYou can set, display and configure the Blue Smart IP65 charger via your smartphone. You can view the status of the charger and battery. Even control the charger functions using the VictronConnect app. The default voltage and current value is displayed on the screen. You can also download the VictronConnect app for free from Google Play or the App Store.\u003cbr\/\u003e\u003cbr\/\u003eRegeneration\u003cbr\/\u003eA lead acid battery that has already been undercharged or left discharged for several days or weeks will deteriorate due to sulphation. If detected early, sulphation can sometimes be partially reversed by charging at a low current until the battery reaches a higher voltage.\u003cbr\/\u003e\u003cbr\/\u003eRecovery function for deeply discharged batteries\u003cbr\/\u003eMost reverse polarity protected chargers will not recognise batteries discharged to zero or near zero voltage and will therefore not start charging them. However, the Blue Power Charger will attempt to recharge even a deeply discharged battery at a low current, restoring normal charging as soon as sufficient voltage is present at the battery terminals.\u003cbr\/\u003e\u003cbr\/\u003eUltra-high efficiency “green” battery charger\u003cbr\/\u003eWith efficiencies of up to 95%, these chargers produce up to 4x less heat than the industry standard. When the battery is fully charged, the power consumption is reduced to 0.5 W, which is 5 to 10 times better than the standard.\u003cbr\/\u003e\u003cbr\/\u003eLong life, safety and quiet operation\u003cbr\/\u003eLow thermal load on electronic components.\u003cbr\/\u003eProtection against dust, water and chemicals.\u003cbr\/\u003eOverheating protection: the output current will decrease with increasing temperature up to 60°C, but the charger will not fail.\u003cbr\/\u003eThe chargers are completely silent: they do not contain an active heat sink (fan) or other moving parts.\u003cbr\/\u003e\u003cbr\/\u003eStorage mode: less corrosion of the positive electrodes\u003cbr\/\u003eEven a lower float charge voltage that follows the absorption phase can cause grid corrosion. It is therefore essential to continue to reduce the charging voltage if the battery remains connected to the charger for more than 48 hours.\u003cbr\/\u003e\u003cbr\/\u003eTemperature compensated charging\u003cbr\/\u003eThe optimal charging voltage for a lead-acid battery varies inversely to its temperature. The Blue Power IP65 Charger measures the ambient temperature during the test phase and compensates for it during charging. The temperature is measured again when the charger is in low current mode during maintenance or storage. Therefore, no special settings are needed for cold or hot environments.\u003cbr\/\u003e\u003cbr\/\u003eCharging mode for Li-ion batteries\u003cbr\/\u003eThe Blue Power Charger uses a special charging algorithm for Li-ion (LiFePO4) batteries, with automatic reset of the undervoltage protection for Li-ion batteries.\u003cbr\/\u003e\u003cbr\/\u003eNormal charging voltage mode 14.4V - suitable for gel and AGM batteries. High charging voltage mode 14.7V - suitable for open flooded batteries.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eInput voltage: 180 – 265 V alternating voltage (AC)\u003cbr\/\u003eFrequency: 45 – 65 Hz\u003cbr\/\u003eCharging current: 25 A\u003cbr\/\u003eNo-load power consumption: 0.5 W\u003cbr\/\u003eAbsorption charging voltage: 14.4 V\u003cbr\/\u003eFloat charging voltage: 13.8 V\u003cbr\/\u003eStorage mode voltage: 13.2 V\u003cbr\/\u003eProtections: output polarity reversal, output short circuit, overheating\u003cbr\/\u003eOperating temperature range: from – 30 to + 50 °C\u003cbr\/\u003eHumidity: maximum 95%\u003cbr\/\u003eBattery output: black and red cable, 1.5 m long\u003cbr\/\u003e230 V AC charger input: 1.5 m cable with classic plug\u003cbr\/\u003eProtection level: IP 65\u003cbr\/\u003ePlug type: CEE7\/7 (Schuko)\u003cbr\/\u003eWeight: 0.9 kg\u003cbr\/\u003eDimensions (height x width x length): 75 x 140 x 240 mm","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":53047993074002,"sku":"04240660","price":4299.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04240660_040270a7-5792-4db0-a9e2-940477763c83.png?v=1776149177","url":"https:\/\/tipa-production.myshopify.com\/en\/products\/chytra-nabijecka-baterii-bluesmart-12v-25a-ip65-dc-konektor","provider":"TIPA","version":"1.0","type":"link"}