{"product_id":"digitalni-termostat-dualni-xk-w1088-50-az-110-c-napajeni-12v","title":"Digital thermostat dual XK-W1088, -50 to + 110 ° C, power supply 12V","description":"Dual variant of the XH-W3001 thermostat (M452) with two independent switching and measuring circuits, supplemented by an audible alarm of exceeding the limit values.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- working voltage: DC 12V\u003cbr\/\u003e- outputs: 2 × - in active state 12VDC via relay switching contact 250VAC \/ 5A (14VDC \/ 20A) -type4181\u003cbr\/\u003e- controlled temperature range: –55–110 ° C\u003cbr\/\u003e- resolution: 0.1 ° C (above 100 ° C 1 ° C), accuracy 0.5 ° C in the range -10 ° -100 ° C\u003cbr\/\u003e- measurement frequency: 2 × \/ sec\u003cbr\/\u003e- measuring sensor: 2 × NTC (10kohm 0.5%), waterproof\u003cbr\/\u003e- dimensions: 75 × 55 × 30mm\u003cbr\/\u003e\u003cbr\/\u003eInstructions for use:\u003cbr\/\u003eThe thermostat allows setting the temperatures T1 and T2 for two independent circuits, ie. 2 × T1 and T2, where T1 is the temperature at which the thermostat closes and T2 is the temperature at which the thermostat turns off. The thermostat is closed by the OUT1 and OUT2 LEDs.\u003cbr\/\u003e\u003cbr\/\u003eTo set the temperature:\u003cbr\/\u003e\u003cbr\/\u003e- hold T1 (^ 1 or ^ 2) for a long time, depending on the setting of the required circuit 1 or 2. As soon as the display starts flashing, the arrows can be used to adjust the switching temperature setting (default setting 25 ° C). Hold down ˇ1 or ˇ2 to set the temperature T2. As soon as the display starts flashing, the arrows can be used to adjust the switch-off temperature setting (preset 40 ° C).\u003cbr\/\u003e- by simultaneously pressing ^ 1 and ^ 2 in the setting mode it is possible to further adjust the delay time of circuit 1 (P0 on the display) or circuit 2 (P1 on the display) in the interval 0–60min (default 0min) and the high temperature audible alarm (P2) or low temperatures (P3). The high and low temperature audible alarm is factory set to the thermostat limits, ie. –55 ° C \/ + 120 ° C. - by simultaneously pressing ^ 1 and ^ 2 for 3 sec. the factory parameters are restored.\u003cbr\/\u003e- the offset of the measuring channel can be set by simultaneously pressing ^ 1 and 1v.\u003cbr\/\u003e\u003cbr\/\u003eConnect the supply voltage to the red (+) and black (-) wires, the 12V appliances to the yellow and black wires.\u003cbr\/\u003e\u003cbr\/\u003eOperating modes:\u003cbr\/\u003eBoth circuits can also be set inversely when T1\u003e T2. This makes it possible to obtain many control methods by combining the two circuits, eg to switch on the heating in a certain temperature range and to switch on cooling in a different temperature range.\u003cbr\/\u003e\u003cbr\/\u003e- heating mode (T1 \u003cT2): After switching on the device, the thermostat output is closed until the measured temperature reaches the T2 level. As soon as the measured value drops to level T1, the output is reactivated.\u003cbr\/\u003e- cooling mode (T1\u003e T2): After switching on the device, the output is inactive until the measured temperature reaches the T1 level. Then the output is activated until the measured temperature reaches level T2.\u003cbr\/\u003e- when you press and hold the up arrow, the display flashes and the setting of the appliance switching temperature is activated.\u003cbr\/\u003e- after pressing and holding the down arrow, the display flashes and thus the opening temperature setting is activated.\u003cbr\/\u003e- if the switching temperature is higher than the opening temperature, the thermostat is set to cooling, otherwise the thermostat will be set to heating.\u003cbr\/\u003e\u003cbr\/\u003eThe product is not a stand-alone unit, it requires professional installation.","brand":"TIPA","offers":[{"title":"Default Title","offer_id":52554606117202,"sku":"09830173","price":151.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/09830173.png?v=1776146787","url":"https:\/\/tipa-production.myshopify.com\/en\/products\/digitalni-termostat-dualni-xk-w1088-50-az-110-c-napajeni-12v","provider":"TIPA","version":"1.0","type":"link"}