{"product_id":"digitalni-termostat-xh-w3001-50-az-110-c-napajeni-12v","title":"Digital thermostat XH-W3001, -50 to + 110 ° C, power supply 12V","description":"Digital thermostat module with LED display and active status signaling (OUT indicator light)\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- working voltage: DC 12V\u003cbr\/\u003e- output: in active state 12VDC via relay switching contact 250VAC \/ 5A (14VDC \/ 20A) -type4181\u003cbr\/\u003e- controlled temperature range: –50–110 ° C\u003cbr\/\u003e- resolution: 0.1 ° C (above 100 ° C 1 ° C), accuracy 0.2 ° C in the range -10 ° -100 ° C\u003cbr\/\u003e- measurement frequency: 2 × \/ sec\u003cbr\/\u003e- measuring sensor: NTC (10K 0.5%), waterproof\u003cbr\/\u003e- dimensions: 60 × 45 × 30mm\u003cbr\/\u003e\u003cbr\/\u003eInstructions for use:\u003cbr\/\u003e\u003cbr\/\u003eThe thermostat allows you to set the temperature T1 and T2, where T1 is the temperature at which the thermostat closes and T2 is the temperature at which the thermostat turns off. Switching on the thermostat is indicated by a red LED at the upper right corner of the display (description \"OUT\").\u003cbr\/\u003e\u003cbr\/\u003e- hold down the up arrow to set the temperature T1. Once the display starts flashing, you can use the arrows to adjust the switch temperature setting.\u003cbr\/\u003e- hold down the down arrow to set the temperature T2. As soon as the display starts flashing, you can use the arrows to adjust the switch-off temperature setting.\u003cbr\/\u003e\u003cbr\/\u003eConnect the supply voltage to the red (+) and black (-) wires, the 12V appliance to the yellow and black wires\u003cbr\/\u003e\u003cbr\/\u003eOperating modes:\u003cbr\/\u003e\u003cbr\/\u003e- heating mode (T1 \u003cT2): After switching on the device, the thermostat output is closed until the measured temperature reaches the T2 level. As soon as the measured value drops to level T1, the output is reactivated.\u003cbr\/\u003e- cooling mode (T1\u003e T2): After switching on the device, the output is inactive until the measured temperature reaches the T1 level. Then the output is activated until the measured temperature reaches level T2.\u003cbr\/\u003e\u003cbr\/\u003eNote:\u003cbr\/\u003eThe output relay has a supply voltage of 12V applied to the switching contact, so it has an active state of 12V from the power supply at its output. without supply voltage. The relay (type 4181) has rated contacts for 230VAC \/ 5A\u003cbr\/\u003e\u003cbr\/\u003eThe product is not a stand-alone unit, it requires professional installation.","brand":"TIPA","offers":[{"title":"Default Title","offer_id":52554732667218,"sku":"09830172","price":88.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/09830172.png?v=1776146786","url":"https:\/\/tipa-production.myshopify.com\/en\/products\/digitalni-termostat-xh-w3001-50-az-110-c-napajeni-12v","provider":"TIPA","version":"1.0","type":"link"}