{"product_id":"pena-na-tepelnou-izolaci-penosil-111-easyspray-kremova-700ml","title":"Thermal insulation foam PENOSIL 111 EasySpray cream 700ml","description":"PENOSIL EasySpray Foam 111 is a one-component spray gun foam.\u003cbr\/\u003e\u003cbr\/\u003eIt is used to seal and insulate hard-to-reach places and surfaces where the use of traditional insulation materials is difficult.\u003cbr\/\u003eIt is characterized by a very low diisocyanate content and fast and convenient application.\u003cbr\/\u003eThe special spray nozzle is compatible with most foam guns.\u003cbr\/\u003eVery low diisocyanate content (\u003c0.1%).\u003cbr\/\u003eExcellent air tightness and thermal and sound insulation properties.\u003cbr\/\u003eIncreased resistance to UV radiation.\u003cbr\/\u003eFast and easy application.\u003cbr\/\u003eExcellent adhesion to most building materials.\u003cbr\/\u003eGood ability to compensate for movements.\u003cbr\/\u003eAny thickness of the insulation layer.\u003cbr\/\u003eNozzle compatible with most foam guns.\u003cbr\/\u003e\u003cbr\/\u003eCOLOR\u003cbr\/\u003eCream.\u003cbr\/\u003e\u003cbr\/\u003eAPPLICATION\u003cbr\/\u003eSealing and insulation of hard-to-reach places and uneven and rounded surfaces where it is difficult to use traditional insulation materials.\u003cbr\/\u003eThermal and acoustic insulation of lintels, doors, ceilings, pipes, attics, balconies, garages, cellars, containers, vehicles, tanks and other building elements exposed to thermal bridges.\u003cbr\/\u003eInsulation of hard-to-reach surfaces and repair of existing insulation layer.\u003cbr\/\u003eReduction of thermal bridges.\u003cbr\/\u003ePrevention of condensation on cold surfaces.\u003cbr\/\u003eAdheres to: wood, concrete, bricks, stone, walls, plaster, plasterboard, metals, PVC and polystyrene.\u003cbr\/\u003e\u003cbr\/\u003eAPPLICATION PROCEDURE\u003cbr\/\u003eSurfaces must be clean and free of dust, loose particles and oil stains.\u003cbr\/\u003eFor faster curing and better quality of the joint, moisten dry surfaces with water.\u003cbr\/\u003eAttach the spray nozzle to the end of the foam gun.\u003cbr\/\u003eShake the can thoroughly at least 20 times.\u003cbr\/\u003eHold the can vertically with the valve upwards and screw it onto the gun.\u003cbr\/\u003eKeep the can upside down during application.\u003cbr\/\u003eThe foam output can be adjusted using the gun trigger and the adjusting screw.\u003cbr\/\u003eTurn the spray nozzle as required.\u003cbr\/\u003eApply the foam from a distance of approximately 40 cm.\u003cbr\/\u003eThe maximum thickness of one layer is 2 cm.\u003cbr\/\u003eWait at least 60 minutes before applying the next layer.\u003cbr\/\u003eThe number of layers is not limited.\u003cbr\/\u003eWhen applying layers, each subsequent layer should be slightly moistened with water.\u003cbr\/\u003eExcess hardened foam can be removed mechanically, e.g. with a knife.\u003cbr\/\u003e\u003cbr\/\u003eLIMITATIONS\u003cbr\/\u003eDoes not adhere to polyethylene (PE), PTFE (Teflon®) or silicone.\u003cbr\/\u003eDo not use at temperatures below +10 °C.\u003cbr\/\u003eThe hardened foam is less sensitive to UV radiation than other PU foams, but it is still recommended to protect it with a suitable protective material.\u003cbr\/\u003eDo not cover the foam until it has completely hardened.\u003cbr\/\u003eNozzle compatible with most foam guns - it is recommended to check compatibility before choosing a gun.\u003cbr\/\u003e\u003cbr\/\u003eSURFACE PREPARATION\u003cbr\/\u003eAir temperature during use: +10°C to +30°C.\u003cbr\/\u003eAdjacent surfaces should be protected with paper, protective foil or other suitable material.\u003cbr\/\u003eDue to the variety of building materials, a preliminary compatibility test is recommended.\u003cbr\/\u003eWhen applying at low temperatures, the foam should be warmed to room temperature (approximately +20°C).\u003cbr\/\u003e\u003cbr\/\u003eCLEANING\u003cbr\/\u003eTo remove fresh foam, use PENOSIL 929 foam cleaner.\u003cbr\/\u003e\u003cbr\/\u003ePENOSIL 995 foam remover softens hardened foam and makes it easier to remove.\u003cbr\/\u003e\u003cbr\/\u003eSTORAGE\u003cbr\/\u003eThe guaranteed shelf life is 12 months from the date of production, provided that it is stored in its original, unopened packaging in a cool, dry place at a temperature between +5°C and +30°C. Do not expose to temperatures above +50°C, do not store near heat sources or in direct sunlight. Store and transport in an upright position.\u003cbr\/\u003e\u003cbr\/\u003eSAFETY REQUIREMENTS\u003cbr\/\u003ePressurized container. Use only in well-ventilated areas. Do not smoke during application! Wear personal protective equipment if necessary. Keep out of reach of children. For more detailed safety information, see the label and the Safety Data Sheet (SDS).","brand":"PENOSIL","offers":[{"title":"Default Title","offer_id":53048161960274,"sku":"06560947","price":298.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06560947.png?v=1776765129","url":"https:\/\/tipa-production.myshopify.com\/en\/products\/pena-na-tepelnou-izolaci-penosil-111-easyspray-kremova-700ml","provider":"TIPA","version":"1.0","type":"link"}