{"product_id":"solarni-invertor-eco-solar-boost-evo-mppt-4000-4kw","title":"Solar inverter ECO SOLAR BOOST EVO MPPT-4000 4KW","description":"Solar inverter ECO Solar Boost EVO MPPT-4000 for direct water heating (with AI support)\u003cbr\/\u003eAre you looking for an efficient, reliable and maximally economical solution for solar water heating or heating? The ECO Solar Boost EVO series inverters represent a new generation of renowned and respected devices that allow the direct use of photovoltaic panels to power heating equipment without the need to connect to the distribution grid (on-grid) or purchase expensive batteries.\u003cbr\/\u003e\u003cbr\/\u003eThis range has been designed based on extensive engineering experience and valuable customer feedback. In addition, it features even greater reliability and an optimized architecture thanks to the support of artificial intelligence (AI) in the design process.\u003cbr\/\u003e\u003cbr\/\u003eThe main advantages of the EVO series inverter:\u003cbr\/\u003eHigh performance and improved algorithm.\u003cbr\/\u003e\u003cbr\/\u003eMaximum gains with MPPT: The integrated MPPT algorithm allows the inverter to intelligently and automatically regulate the amount of energy transferred to the heater, maximizing the energy collected from the PV panels in all weather conditions.\u003cbr\/\u003e\u003cbr\/\u003ePriority dual output (2× mains socket). The system allows the connection of two heating devices (e.g. two boilers), with the device on Output 1 being heated first. Output 2 starts automatically when the thermostat of the first device reaches the desired temperature and stops drawing power.\u003cbr\/\u003e\u003cbr\/\u003eComprehensive electronic protection: the device has built-in protection against overload, short circuit, overvoltage and overheating (thermal protection at 80°C). In the event of any anomaly, the inverter safely switches off and signals the fault by flashing a green or red LED.\u003cbr\/\u003e\u003cbr\/\u003e?? IMPORTANT WIRING NOTES:\u003cbr\/\u003e\u003cbr\/\u003eOutput number 1 (Priority): It is intended for any heating devices, including those with electronic controllers.\u003cbr\/\u003e\u003cbr\/\u003eOutput number 2 (Dependent): Is intended exclusively for operation of heating devices with a bimetallic thermostat. Heating devices with electronic controls must not be operated on this output.\u003cbr\/\u003e\u003cbr\/\u003eWide range of practical applications\u003cbr\/\u003eThe ECO Solar Boost EVO inverter enables a wide range of purely resistive heating devices to be powered directly from the PV panels:\u003cbr\/\u003e\u003cbr\/\u003eWater heating: PV heating for boilers, boilers and storage tanks.\u003cbr\/\u003e\u003cbr\/\u003eBuilding heating: direct power supply for electric radiators, direct-fired heaters and convectors.\u003cbr\/\u003e\u003cbr\/\u003eModern heating systems: ideal for infrared (IR) heaters and electric heating mats.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eEasy installation and low cost:\u003cbr\/\u003e\u003cbr\/\u003eThe entire system is extremely simple to assemble and does not require complicated loosening. It consists of only three basic elements:\u003cbr\/\u003e\u003cbr\/\u003e- ECO Solar Boost EVO MPPT-4000.\u003cbr\/\u003e- Photovoltaic panels: Several standard PV panels of 400-700 W connected in series or series-parallel using standard MC4 integrated connectors. The total system voltage shall be in the range of 120-300 V ($V_{oc}$ at 25 °C), with an absolute inverter operating maximum of 120-350 V DC.\u003cbr\/\u003e- Appliance (power receiver): Any compatible 200-4000 W resistive heating device fitted with a conventional heater (cartridge).How to select the right heater (cartridge)?The correct selection of the heater ensures the highest efficiency of the entire water heating system and ensures that the integrated MPPT algorithm can adjust the load resistance and use the panels to their maximum.\u003cbr\/\u003e\u003cbr\/\u003eSelect the optimal heater performance based on the total power and voltage of your PV array.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eSpecifications:\u003cbr\/\u003e\u003cbr\/\u003eInput voltage (DC): 120 V ÷ 350 V\u003cbr\/\u003eOutput voltage RMS (AC): 120 V ÷ 250 V\u003cbr\/\u003eOutput voltage frequency: 50 Hz\u003cbr\/\u003eOutput voltage waveform: modified sine wave\u003cbr\/\u003eMaximum power: 4000 W\u003cbr\/\u003eMaximum current: 16A\u003cbr\/\u003eMains\/Distributor Connection Point: 40 V\/80 V (±5%)\u003cbr\/\u003ePV panel wiring: series or series-parallel\u003cbr\/\u003eDC input power connector: MC4 - 1 set\u003cbr\/\u003eAC output socket: type E (with pin) - 2 pcs.\u003cbr\/\u003eOperating temperature: -25°C ÷ 55°C\u003cbr\/\u003eEfficiency: \u003e 97%\u003cbr\/\u003eCooling: active (automatic regulation)\u003cbr\/\u003eDegree of protection (IP): IP21\u003cbr\/\u003eMPPT function: yes\u003cbr\/\u003eThermal protection: 80 °C\u003cbr\/\u003eOverload protection: yes\u003cbr\/\u003eShort circuit protection: yes\u003cbr\/\u003eSurge protection: yes\u003cbr\/\u003eSupport for resistive loads: yes\u003cbr\/\u003eCapacitive load support: no\u003cbr\/\u003eSupport for inductive loads: no\u003cbr\/\u003eHousing: aluminum\u003cbr\/\u003eDimensions (L x W x H): 315 x 170 x 80 [mm]\u003cbr\/\u003eWeight: 1.9 kg","brand":"AZO","offers":[{"title":"Default Title","offer_id":53752117821778,"sku":"04291285","price":5190.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04291285.jpg?v=1781506171","url":"https:\/\/tipa-production.myshopify.com\/en\/products\/solar-inverter-eco-solar-boost-evo-mppt4000-4kw","provider":"TIPA","version":"1.0","type":"link"}