{"product_id":"tmel-akrylovy-stukovy-penosil-655-bily-280ml","title":"Acrylic stucco putty PENOSIL 655 white 280ml","description":"PENOSIL Stucco Acrylic Putty 655 is a water-based elastoplastic putty with a granular structure.\u003cbr\/\u003e\u003cbr\/\u003eIt is intended for filling and sealing small joints and cracks on surfaces with a rough texture.\u003cbr\/\u003eDue to its composition, it provides a uniform and weather-resistant surface on surfaces such as plaster.\u003cbr\/\u003eCreates a plaster-like surface.\u003cbr\/\u003eResistant to UV radiation, weathering and aging.\u003cbr\/\u003eFor indoor and outdoor use.\u003cbr\/\u003eFree of solvents, isocyanates and silicone.\u003cbr\/\u003eEasy to process.\u003cbr\/\u003eCan be painted.\u003cbr\/\u003e\u003cbr\/\u003eCOLOR\u003cbr\/\u003eWhite.\u003cbr\/\u003e\u003cbr\/\u003eAPPLICATION\u003cbr\/\u003eFilling joints and cracks in plaster and other surfaces with a rough finish.\u003cbr\/\u003eRepair of lime-cement plasters or decorative plasters (e.g. antique).\u003cbr\/\u003eSealing joints with low mobility (up to 7.5%) and medium stress.\u003cbr\/\u003eAdheres to: drywall, plaster, concrete, stone, brick, stucco, masonry, wood, ceramic tiles and protected metals.\u003cbr\/\u003e\u003cbr\/\u003eAPPLICATION PROCEDURE\u003cbr\/\u003eCut off the tip of the cartridge.\u003cbr\/\u003eScrew on the nozzle and cut a hole at a 45° angle - slightly larger than the joint to be sealed.\u003cbr\/\u003eInsert the cartridge into the sealant gun.\u003cbr\/\u003eApply the sealant by applying even pressure to the gun trigger and moving the nozzle smoothly along the joint.\u003cbr\/\u003eRemove excess product and smooth the surface with a suitable tool.\u003cbr\/\u003e??????\u003cbr\/\u003eLIMITATIONS\u003cbr\/\u003eDo not use on bituminous substrates or on materials containing tar that may release oils or plasticizers.\u003cbr\/\u003eThe product is not suitable for joints with a mobility exceeding 7.5%.\u003cbr\/\u003eDo not use at temperatures below +5°C.\u003cbr\/\u003eDo not use in damp or wet conditions or where there is a risk of precipitation.\u003cbr\/\u003eNot suitable for surfaces in constant contact with water.\u003cbr\/\u003ePainting before the product has fully cured may cause the paint to crack.\u003cbr\/\u003e\u003cbr\/\u003eSURFACE PREPARATION\u003cbr\/\u003eSurfaces to be sealed must be clean, dry and free of dust, loose particles, oil stains and old sealant residues.\u003cbr\/\u003eNon-porous surfaces should be cleaned with solvent using a clean, lint-free cotton cloth and excess solvent should be removed.\u003cbr\/\u003eIf necessary, protect adjacent surfaces with masking tape.\u003cbr\/\u003eDepending on the size of the joint, the drying time is approximately 2.5 - 3 mm per day. During curing, ensure that the sealed surfaces remain clean and not exposed to mechanical stress.\u003cbr\/\u003eTo ensure a long service life of the product, it is recommended to overcoat it with paint after curing.\u003cbr\/\u003eA preliminary compatibility test is recommended; If necessary, the surface can be primed.\u003cbr\/\u003eApplication temperature: from +5 °C to +40 °C.\u003cbr\/\u003e\u003cbr\/\u003eCLEANING\u003cbr\/\u003eUncured acrylic can be removed with water or PENOSIL cleaning wipes. Cured acrylic should first be removed mechanically and then wiped with a damp cloth.\u003cbr\/\u003e\u003cbr\/\u003eSTORAGE\u003cbr\/\u003eGuaranteed shelf life is 18 months from the date of production, provided that it is stored in the original sealed packaging, in a dry place at a temperature between +5°C and +30°C. Avoid frost and temperatures above +30°C.\u003cbr\/\u003eShort-term frost resistance - maximum 10 days at temperatures below -18°C.\u003cbr\/\u003eFreeze-thaw cycle resistance: 7 cycles at -18°C and 23°C, with one cycle lasting 48 hours (24 hours at -18°C and 24 hours at +23°C.)\u003cbr\/\u003e\u003cbr\/\u003eSAFETY REQUIREMENTS\u003cbr\/\u003eEnsure adequate ventilation during application and wear necessary personal protective equipment. For more detailed safety information, please refer to the Material Safety Data Sheet (MSDS).","brand":"PENOSIL","offers":[{"title":"Default Title","offer_id":53048009818450,"sku":"06560924","price":80.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06560924.png?v=1776149294","url":"https:\/\/tipa-production.myshopify.com\/en\/products\/tmel-akrylovy-stukovy-penosil-655-bily-280ml","provider":"TIPA","version":"1.0","type":"link"}