Alcohol tester CEL-TEC Mini, USB-C

CEL-TEC Mini alcohol tester is a modern and user-friendly solution for measuring blood alcohol. Thanks to its accuracy, AirSensorTool mobile application in Czech, hygienic and non-contact measurement and the function of saving the history of results (up to 100 results), it is ideal for personal use.

The tester is designed to be as compact, lightweight and easy to carry as possible. With dimensions of 55 × 25 × 8 mm and a weight of only 7 grams, it can be comfortably carried in a pocket or handbag. The device is equipped with a USB-C connector for physical connection to a mobile phone, while this port is used to power the tester, communication with the phone is via Bluetooth. Although USB-C is standard mainly for devices with the Android operating system, the tester is also compatible with Apple products (iPhone, iPad) equipped with a USB-C port.

Accurate measurement
AirSensorTool mobile application in Czech
Hygienic and contactless measurement
Storage of historical results up to 100 records
Compact and lightweight design
For iPhones only with USB-C connector
Connection via connector and Bluetooth at the same time
Supports various units of measurement
LED indicator
Sensitive sensor
Recommended to measure at least 20 minutes after consuming alcohol
Fast data transfer to the application
Compatible with Apple products and Android via USB-C port

The measurement is completely hygienic and contactless - the tester does not require the use of a mouthpiece. The measurement process takes place by blowing into the sensor under the LED indicator from a distance of 2-3 centimeters for ten seconds. The measured values are immediately displayed in the mobile application, which supports various units of measurement, such as percentage BAC (blood alcohol content), milligrams per liter, grams per liter or milligrams per 100 milliliters. You can easily switch between these units thanks to the intuitive touch control. The device is equipped with an indicator LED that informs the user about the status of the tester. When connected to a charged phone, the LED lights up white, indicating readiness for use. The sensor warms up before the measurement is accompanied by a red flashing of the LED. During the breath test, it flashes white. The tester uses a combination of a physical connection via a USB-C connector for power and wireless communication via Bluetooth, which allows for fast data transfer to the application and accurate display of results in real time.

The tester is equipped with a highly sensitive sensor that allows for extremely accurate blood alcohol measurement. It is recommended to take the measurement at least twenty minutes after the last consumption of alcohol so that the results accurately reflect the blood alcohol level. Immediate measurement after drinking alcoholic beverages may be distorted, as it shows the concentration of alcohol in the breath rather than in the blood itself. Long-term functionality and accuracy of the device are ensured by following the correct usage procedures. The tester should not be exposed to excessively concentrated gases, such as breath with a high alcohol content immediately after drinking beverages. By following these rules, you can minimize the risk of damage to the sensor and maintain the reliability of the device.

Be prepared. Be safe for yourself and those around you.

Technical parameters:

Memory: up to 100 records
Measurement distance: 2 - 3 cm
Operating ambient temperature: 0 °C to 40 °C
Power supply: via the USB-C connector of the phone
Weight: 7 g
Dimensions: 55 x 25 x 8 mm
Communication: BLE 5.0
Working voltage: 5 V
Measurement range: 0-200 BAC (mg/100 ml)
Working current: ?24 mA
Storage temperature: 0 °C to 30 °C