Antenna source 12V/300mA with power switch EMOS J5810

The pulse stabilized power supply is designed to power preamplifiers/amplifiers in small antenna systems requiring 12 V DC voltage with a maximum consumption of up to 300 mA.
The EM-12SP power supply is equipped with F sockets for connecting F connectors, which greatly speeds up and facilitates the assembly of the coaxial cable.
The EM-12SP power supply is equipped with a protection circuit against accidental short circuit at the antenna input.
The power supply technology used reduces consumption in no-load operation by up to 90% compared to a classic power supply.
The integrated power crossover allows powering the preamplifier/amplifier located in the antenna box, using the same coaxial cable that transmits the DVB-T signal to the television receiver.
The adapter complies with the requirements of international standards ECO-design, CE. These standards guarantee low consumption in "stand-by mode" without load and thus a reduction in CO2 emissions.
The power supply technology used reduces consumption in no-load operation by up to 90% compared to a classic power supply.
Thanks to its higher efficiency, it can save up to 30% of electricity in normal operation compared to ordinary adapters.

Technical parameters:

input voltage: 110-230V
output voltage: 12 V
output current: 300 mA
standby power consumption: <0.3W
filter capacitor: 470 µF
power crossover: yes
crossover input connector: F connector
crossover output connector: IEC
through attenuation of the power crossover: 1 dB
power cable: 1.5 m
max output load constant/peak: 300 mA
dimension: 70 x 57 x 23 mm