1
of
3
Loading...
Arduino Upgraded Learning Kit - Development starter kit UNO R3
Vývojový starter kit Arduino UNO R3 - základní deska ATmega328, 14 digitálních I/O pinů (6× PWM), 6 analogových vstupů, krystal 16MHz, USB kabel, LCD1602 displej s I2C sběrnicí a modrým podsvícením, RFID čtečka RC522 13,56MHz s vestavěnou anténou, rozhraní ICSP, resetovací tlačítko, napájecí konektor, kompatibilní s Arduino IDE, vhodné pro začátečníky i pokročilé
Will be restocked
Expected shipping:
10.08.2026
at our place
Regular price
840,00 Kč
694,21 Kč
excl. VAT
Unit price
/
Unavailable
TIPA | SKU:
09830049
Arduino Upgraded Learning Kit - Development starter kit UNO R3
Regular price
840,00 Kč
694,21 Kč
excl. VAT
Unit price
/
Unavailable
Product description
Kit includes:
- 1pcs Arduino UNO R3 base module - Arduino Uno (clone) is a microcontroller development board based on ATmega328. The board contains 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, 16 MHz crystal, USB connection, power connector, ICSP interface and reset button. It contains everything you need to operate the microcontroller, simply connect it to your computer using a USB cable and get started.
- 1pcs USB cable to the base module
- 1pcs LCD1602 IIC i2c – Display on I2C bus with blue backlight. You can turn off the backlight by removing the jumper.
- 1pcs RC552 module – RFID reader 13.56MHz with built-in antenna contains everything necessary for its easy use. RFID devices can take different forms, such as cards, stickers, bracelets and round pendants.
- 1pcs RFID white card
- 1pcs RFID pendant/keyring blue
- 1pcs joystick Module – Ideal for gaming applications, two-way 10K resistor. 5V power supply, measured analogue X and Y in the range 0-5
- 1pcs keyboard 4×4 (16 buttons)
- 1pcs RTC module – Precise real-time I2C module (RTC) with integrated temperature compensated crystal oscillator and crystal.
- 1pcs arduino water smoother sensor – Water level sensor. A number of parallel wires are exposed to water volume. Directly connected to the Arduino analog input.
- 1pcs arduino humidity sensor - The hygrometer is an easy-to-use module that contains everything you need already in your case. All you have to do is connect it with three wires to the basic arduino module
- 1pcs RGB LED module
- 1pcs motor control module
- 1pcs 5V stepper motor - 28BYJ-48
- 1pcs 1-channel 5V relay module, 250VAC 10A / 30VDC 10A
- 1pcs solderless array MB 102 (830 pins)
- 56pcs of dupont connecting cables
- 1pcs 10 pin Dupont lišta (Male to Female)
- 1pcs arduino sound sensor - Suitable for acoustically switched light, for example
- 1pcs IR remote control
- 1pcs 10K potentiometer
- 1pcs digital digits (12 × 19mm)
- 1pcs 4 digital digits (50 × 19mm)
- 1pcs 8x8 LED matrix (32 x 32mm)
- 1pcs micro servo 9G (SG90)
- 2pcs buzzer
- 2pcs shock sensor SW-520D
- 3pcs photoresistors
- 5pcs button switch
- 1pcs connector fort 9V battery
- 15pcs LEDs (5pcs - green, 5pcs - red, 5pcs - yellow)
- 30pcs resistors (220R, 10K, 1K)
- 1pcs Flame indicator
- 1pcs IO 74HC595N
- 1pcs infrared receiver
This product is not a stand-alone unit and may require professional installation
- 1pcs Arduino UNO R3 base module - Arduino Uno (clone) is a microcontroller development board based on ATmega328. The board contains 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, 16 MHz crystal, USB connection, power connector, ICSP interface and reset button. It contains everything you need to operate the microcontroller, simply connect it to your computer using a USB cable and get started.
- 1pcs USB cable to the base module
- 1pcs LCD1602 IIC i2c – Display on I2C bus with blue backlight. You can turn off the backlight by removing the jumper.
- 1pcs RC552 module – RFID reader 13.56MHz with built-in antenna contains everything necessary for its easy use. RFID devices can take different forms, such as cards, stickers, bracelets and round pendants.
- 1pcs RFID white card
- 1pcs RFID pendant/keyring blue
- 1pcs joystick Module – Ideal for gaming applications, two-way 10K resistor. 5V power supply, measured analogue X and Y in the range 0-5
- 1pcs keyboard 4×4 (16 buttons)
- 1pcs RTC module – Precise real-time I2C module (RTC) with integrated temperature compensated crystal oscillator and crystal.
- 1pcs arduino water smoother sensor – Water level sensor. A number of parallel wires are exposed to water volume. Directly connected to the Arduino analog input.
- 1pcs arduino humidity sensor - The hygrometer is an easy-to-use module that contains everything you need already in your case. All you have to do is connect it with three wires to the basic arduino module
- 1pcs RGB LED module
- 1pcs motor control module
- 1pcs 5V stepper motor - 28BYJ-48
- 1pcs 1-channel 5V relay module, 250VAC 10A / 30VDC 10A
- 1pcs solderless array MB 102 (830 pins)
- 56pcs of dupont connecting cables
- 1pcs 10 pin Dupont lišta (Male to Female)
- 1pcs arduino sound sensor - Suitable for acoustically switched light, for example
- 1pcs IR remote control
- 1pcs 10K potentiometer
- 1pcs digital digits (12 × 19mm)
- 1pcs 4 digital digits (50 × 19mm)
- 1pcs 8x8 LED matrix (32 x 32mm)
- 1pcs micro servo 9G (SG90)
- 2pcs buzzer
- 2pcs shock sensor SW-520D
- 3pcs photoresistors
- 5pcs button switch
- 1pcs connector fort 9V battery
- 15pcs LEDs (5pcs - green, 5pcs - red, 5pcs - yellow)
- 30pcs resistors (220R, 10K, 1K)
- 1pcs Flame indicator
- 1pcs IO 74HC595N
- 1pcs infrared receiver
This product is not a stand-alone unit and may require professional installation
