Battery LiFePO4 25,6V 200Ah VOLT

LiFePO4 (lithium iron phosphate) batteries with built-in BMS are characterized by their very low weight and high number of operating cycles - their lifetime is approximately 6000 cycles at a DoD of 60%.

The high cyclability and very low self-discharge make the LiFePO4 battery ideal for both emergency power systems and off-grid installations.

Its low weight allows its use in mobile installations - in vehicles (caravans, food trucks) and boats.

The built-in BMS system controls the charging and discharging processes and allows long-term storage without loss of rated capacity.

LIFEPO4 BATTERY USE

Emergency power systems
Off-grid installation
Vehicle installation - caravans, refreshment vans
Wiring in boats - power supply for electronic equipment, lighting, household appliances ?? only using hermetic battery cover

IMPORTANT INFORMATION AND RECOMMENDATIONS

When using a LiFePO4 battery to power electric motor equipment (e.g. propeller motors), it is mandatory to use a DC fuse on the (+) circuit of the battery - with a value no greater than the maximum load current indicated on the cover.

Loading the battery with a starting current that can be up to 5-10 times the rated operating current (e.g. motors, compressors, refrigerators, air conditioners) can cause permanent damage to the LiFePO4 battery with BMS , which is not covered by the warranty.

Only charge the battery with a charger designed for LiFePO4 batteries.

INSTRUCTION MATERIAL

We invite you to watch a practical instructional video on the use of LiFePO4 batteries: https://www.youtube.com/watch?v=qWqz4VoSLMI

Technical parameters:

Rated voltage: 25.6 V
Rated capacity: 200AH
Voltage range: 21.6V-29.2V
Maximum charging current: 200A
Maximum discharge current: 200A
Lifetime: 3000 cycles (100% DoD)
Life: 4500 cycles (80% DoD)
Life: 6000 cycles (60% DoD)
Height: 218 mm
Width: 240 mm
Length: 522 mm
Weight: 35.3 kg +/- 3%