SAFE 5YGAS-RF flammable gas detector

Wireless flammable and explosive gas detector
A new generation of wireless flammable and explosive gas detector designed for the detection of Methane (CH4) based hazards such as natural gas, biogas, CNG, LPG, mine gas etc. The purpose of the detector is to provide early warning of an imminent danger of a leak of flammable and explosive gases in the monitored area. The device is equipped with relay and pulse output, which allows its easy integration into third-party alarm and automation systems. This allows you to connect and control external devices such as automatic gas shut-off valves, alarm annunciators or fans for space ventilation. The detector can operate as part of a FireSAFE fire alarm system with the support of the FireSAFE Hub central control unit or completely autonomously. SAFE 5YGAS - RF is powered by a safe 12V DC voltage via the 230V / 50Hz mains power supply included in the package.

Maximum reliability for your maximum safety
The semiconductor integrated sensor of the wireless detector meets the highest European safety standards and is certified and calibrated to EN 50194 (standard for electrical equipment for the detection of combustible gases) without the additional need for periodic service calibration. The second generation sensor performs continuous air testing for the presence of dangerous levels of gas concentrations in the monitored area. The instrument is controlled by a state-of-the-art microprocessor that immediately sends a radio signal when a dangerous gas level is detected, activating both visual and audible alarms. Thus, SAFE 5YGAS - RF provides early warning of gas leaks and contributes to maximum protection of your home.

Wireless communication in the FireSAFE network
The detector includes an integrated RF module which, thanks to the CONNECTED function, allows two or more FireSAFE detectors to be connected wirelessly to create an interconnected wireless network. In this case, if one of the devices triggers an alarm, it will send out a radio signal and all other FireSAFE units connected in the network will respond to the alarm.

FireSAFE with central control unit
An intelligent Hub FireSAFE central control unit can be added to the wireless network. These units then enable convenient setup and control of the complex FireSAFE system remotely via an intuitive free mobile app (for Android and iOS) for smartphones, tablets and more. The Hub constantly monitors the status of all connected FireSAFE detectors and devices. As soon as it detects any danger, it immediately notifies system users, not only through push notifications, but also by triggering a loud and clear alarm with visual signalling directly in the FireSAFE mobile app. This way you are always informed in time and can react quickly to any threat.

SAFE 5YGAS - RF
Wireless flammable and explosive gas detector
A new generation of wireless flammable and explosive gas detector designed for the detection of Methane (CH4) based hazards such as natural gas, biogas, CNG, LPG, mine gas etc. The purpose of the detector is to provide early warning of an imminent hazard when flammable and explosive gases are leaking in the monitored area. The device is equipped with relay and pulse output, which allows its easy integration into third-party alarm and automation systems. This allows you to connect and control external devices such as automatic gas shut-off valves, alarm annunciators or fans for space ventilation. The detector can operate as part of a FireSAFE fire alarm system with the support of the FireSAFE Hub central control unit or completely autonomously. SAFE 5YGAS - RF is powered by a safe 12V DC voltage via the 230V / 50Hz mains power supply included in the package.
SAFE 5YGAS - RF

SAFE 5YGAS - RF
Maximum reliability for your maximum safety
The semiconductor integrated wireless detector sensor meets the highest European safety standards and is certified and calibrated to EN 50194 (standard for electrical equipment for the detection of combustible gases) without the additional need for periodic service calibration. The second generation sensor performs continuous air testing for the presence of dangerous levels of gas concentrations in the monitored area. The instrument is controlled by a state-of-the-art microprocessor that immediately sends a radio signal when a dangerous gas level is detected, activating both visual and audible alarms. Thus, SAFE 5YGAS - RF provides early warning of gas leaks and contributes to maximum protection of your home.

Wireless communication in the FireSAFE network
The detector includes an integrated RF module which, thanks to the CONNECTED function, allows two or more FireSAFE detectors to be connected wirelessly to create an interconnected wireless network. In this case, if one of the devices triggers an alarm, it will send out a radio signal and all other FireSAFE units connected in the network will respond to the alarm.

FireSAFE with central control unit
An intelligent Hub FireSAFE central control unit can be added to the wireless network. These units then enable convenient setup and control of the complex FireSAFE system remotely via an intuitive free mobile app (for Android and iOS) for smartphones, tablets and more. The Hub constantly monitors the status of all connected FireSAFE detectors and devices. As soon as it detects any danger, it immediately notifies system users, not only through push notifications, but also by triggering a loud and clear alarm with visual signalling directly in the FireSAFE mobile app. This way you are always informed in time and can react quickly to any threat.

Two control outputs
SAFE 5YGAS has two control outputs (relay and pulse), which allow a wide range of installation options with an emphasis on maximum safety. The device outputs offer direct connection and control of external components such as automatic gas shut-off valves, alarm signaling elements, HVAC fans, electric locks, lighting and other devices used in alarm or automation systems. In this way, SAFE 5YGAS - RF provides not only reliable protection, but also wider flexibility to allow a higher degree of protection in the event of a gas leak detection.

Fire alarm signaling for gas leaks
In the event that the detector detects an exceedance of the specified gas limit value, it automatically triggers a loud 85 dB acoustic alarm signal, accompanied by the flashing of a red LED indicator to signal a gas leak fire alarm. This is a targeted way of attracting the attention of building occupants by means of a high noise level and an intense LED signalling that a dangerous situation is developing in some part of the building. The purpose of the fire alarm is then to immediately respond to the alarm event or to move people from the scene of the emergency to a safe zone.

With IZOVAX protection, even in areas with increased humidity
The electronic components and the circuit board of the detector are coated with an insulating and protective layer of IZOVAX nanoparticle paint and, thanks to the innovative second-generation semiconductor sensor technology, these devices can be installed in a wide range of complicated environments (bathrooms, drying rooms, saunas, utility rooms, kitchens, garages, boiler rooms, workshops, warehouses, laboratories ...), where moisture or vapours usually have a negative impact on the detection function or the lifetime of the device.

Technical parameters:

Sensor technology: second generation semiconductor sensor.
Detection type: Methane CH4 / natural gas
Device Type.
Alarm: 0.8% LFL / LEL
Power supply and consumption
Warm-up time: 180 s
Power: Power adapter: 100 - 240 V ~ 50 / 60 Hz (max. 0.3 A)
Detector: 2 V DC / 1.0 A (12.0 W) - external power adapter
Maximum power consumption: Standby: ?1.5 W
Alarm: ?2.5 W
Outputs and alarms
Relay output: 1× COM / NO relay output (12 V DC, 1.5 A), for example for controlling the power supply.
Pulse voltage output: 1× pulse voltage output (12 V DC, 1.5 A), e.g. for switching a gas shut-off valve
Signalling: Acoustic (85 dB siren) and optical (3x LED indicator)
LED indication: AC power supply: green LED (Power)
Alarm: red LED indicator (Alarm)
Fault: yellow LED (Fault)
End of Life: yellow LED (EOL)
Exceeding Permissible Concentration: 85 dB acoustic alarm accompanied by visual indication of red LED
Wireless transmission
Operating radio frequency: 868 MHz
Radio range: Up to 1000 m in an open area
Installation and environment
Mounting method: Wall-mounted - fixed installation (screws included)
Installation type: Indoor - fixed installation
Protection: IPX2D
Operating temperature: -10 °C to +55 °C
Operating humidity: 10% to 95% relative humidity without condensation
Storage conditions: Temperature: -20 °C to +60 °C
Humidity: 5% to 95% relative humidity without condensation
Dimensions and weights
Dimensions. 118.0 mm × 78.0 mm × 33.7 mm
Device weight: 126 g
Device weight with power adapter: 232 g
Length of power cable: 3 m
Certification: EN 50194-1:2023
Declaration of conformity. CE
Lifetime of device and sensor: min. 5 years

Package contents:

SAFE 5YGAS - RF
User's manual with set of information labels
Power adapter with power cord
Mounting bracket
Mounting material