Carbon monoxide detector EMOS GS827

Do you like being in control and want to make sure you and your loved ones are always safe? Get yourself a reliable carbon monoxide (CO) leak detector that monitors the presence of the odourless, highly toxic, invisible gas for you. If you heat your home with a gas boiler or fireplace, use a karma or gas stove, the lives of your entire family could be at risk without a CO detector. Carbon monoxide can be produced by the imperfect combustion of fuels and you cannot easily detect its presence without a CO alarm.

10 years of safety for your family
Carbon monoxide leaks are usually difficult to detect. With the P56402 CO alarm you can be sure for the next 10 years that your life will not be in immediate danger of carbon monoxide poisoning caused by a faulty gas boiler, cooker or blocked chimney. When the end of the alarm's lifetime is approaching, the detector itself will alert you with an acoustic and optical signal.

Optical and acoustic signalling
The CO alarm is equipped with three LEDs that indicate every 30 seconds whether the device is fully operational. If the detector is in an error state and the CO levels in the room are not reliably measured, the LEDs will flash yellow every 30 seconds and the device will simultaneously emit an acoustic signal.

Alarm functionality can be verified at any time by pressing the TEST/SILENCE button. If the device is fully functional, it will beep 4 times and the LED signal will flash 4 times at the same time.

Safety fuse
The CO alarm is equipped with a safety fuse so that you do not forget to insert batteries into the detector. If both batteries are not inserted in the device, two metal tabs under the battery compartment ensure that the battery cover cannot be closed.

Easy installation
The CO alarm P56402 is designed for wall mounting or for free placement anywhere in the room. Two holes are provided on the detector for hanging on the wall. The alarm is easily attached by drilling two holes in the wall, inserting the dowels and screws included in the package and simply hanging the device.

Where to place the detector
The CO alarm P56402 should be mounted on the wall in all rooms where there is equipment burning fossil fuels (wood, coal, gas, petrol, etc.). Dangerous concentrations of carbon monoxide are most often caused by the failure or neglect of maintenance of such equipment or by insufficient ventilation.

It is also recommended to place a CO detector in all rooms where you spend a lot of time (bedrooms, living rooms, children's rooms).

A reliable servant that works day and night
Carbon monoxide (CO) is neither seen nor smelled. Every year, this silent killer is responsible for thousands of lives around the world. Yet there is such a simple and inexpensive way to protect yourself from carbon monoxide poisoning.

Invest in a carbon monoxide (CO) detector in your home and ensure your family has a safe environment. Make sure your health is well taken care of - during the day, but also at night when the whole family is sleeping soundly. The functionality of the P56402 CO alarm has been tested in European Union laboratories.

Technical parameters:

Alarm volume: >85 dB at a distance of 3 m
protection: IP30
power supply: 2× 1.5 V AA, included
Operating temperature: -10 °C to 40 °C
Operating humidity: 30-95 %
Installation type: wall-mounted or free-standing
Signalling type: optical and audible
lifetime: 10 years
size: 38 × 120 × 80 mm