Filament ELEGOO Rapid PETG - 1kg black

ELEGOO Rapid PETG filament (polyethylene terephthalate - a durable plastic modified for high-speed printing) in white is designed for printing at speeds of up to 600 mm/s - without loss of quality. Thanks to its good flowability and low tendency to shrink, this material creates aesthetic models without deformation even in demanding projects.

Durability for everyday use
Rapid PETG combines the ease of printing known from PLA (polylactide - a biodegradable plastic based on vegetable starch) with durability similar to ABS (acrylonitrile butadiene styrene - an impact-resistant plastic commonly used in electronics and household appliances). The filament is well suited for utility projects that must withstand pressure, shock or heavy use.

Hassle-free handling
The material is wound evenly and carefully controlled, which reduces the risk of tangling. Made from recycled materials, the spool has been vacuum-packed with a desiccant to protect it from dust and water. Rapid PETG is compatible with most FDM (Fused Deposition Modeling) 3D printers.

Technical specifications:

Color: Black
Weight: 1 kg
Recommended print settings:
Pre-print drying settings: 70 ± 5 °C
Ambient temperature and humidity: ? 70 °C, ? 20% RH (storage with desiccant)
Nozzle temperature: 240-270 °C
Bed temperature (depending on printer and surface): 65-75 °C
Work surface type: Textured PEI (polyetherimide - a durable, adhesive material used as a base for 3D printing) or other compatible surface.
Print speed: Less than 600 mm/s
Physical properties:
Density: 1.29 g/cm3
Melting point: 216 °C
Deflection temperature under load: 72 °C
Softening temperature (Vicat test): 70 °C
Mechanical properties:
Tensile strength (XY - measured in the horizontal plane of the print, where the material is strongest): 42 ± 2 MPa
Elongation at break (XY): 8.9% ± 1.5%
Flexural strength (XY): 68 ± 2 MPa
Flexural modulus (XY): 2097 ± 173 MPa
Impact strength (XY): 87.6 ± 4.2 kJ/m2