FNIRSI 1014D Oscilloscope

The FNIRSI 1014D is an oscilloscope with a signal generator offering a bandwidth of 100 MHz and a sampling rate of 1 GSa/s. Thanks to its trigger modes (Auto, Normal, Single), it is suitable for both periodic analogue and non-periodic digital signals. A cursor measurement function is available, which facilitates the manual reading of parameters such as amplitude and frequency without the need for further calculations.
The signal generator offers 14 standard signal types, including sine, square and sawtooth waves, with a maximum frequency of 10 MHz. It also supports the output of a custom signal with adjustable frequency, amplitude and duty cycle of up to 2.5 Vpp.
The oscilloscope is equipped with 1 GB of internal memory, which allows up to 1,000 waveforms and 1,000 screen captures to be stored. Stored data can be easily exported via the USB port to a computer for further analysis. A powerful waveform manager allows you to view, zoom in on, rotate and delete stored recordings directly on the device. Technical specifications:

Number of channels: 2 Display: 7" colour TFT LCD, resolution 800 × 480 pixels Power supply: 5V (2A, 3A or 4A) Oscilloscope:
Analogue bandwidth: 100 MHz × 2 channels Sampling rate: 1 GSa/s (real-time) Memory depth: 240 kbit
Vertical sensitivity: 50 mV/div – 500 V/div Horizontal time base: 50 S/div – 10 nS/div Input impedance: 1 Mohm ADC resolution: 8 bits
Rise time: < 3 ns Trigger modes: automatic (AUTO), normal (Normal), single (Single) Trigger edge: rising (Rising), falling (Falling)
Maximum input voltage: 40 V (1X probe), 400 V (10X probe) Display modes: Y-T, Rolling, X-Y
Mathematical functions: 14 types (e.g. FFT analysis) Cursor measurement support: Yes Persistence (afterglow): OFF, 500 ms, 1 s, infinite Signal generator:
Channels: 1 Signal types: 14 standard signals + 1 customisable signal (sine wave, square wave, sawtooth wave, half-wave, full wave, positive/negative steps, exponential rise/fall, DC, multi-audio, sink pulse, Lorentz wave) Maximum frequency: sine wave: 10 MHz, other waves: 2 MHz
Customisable signal: 1 MHz Frequency resolution: 1 Hz Output amplitude: 2.5 Vpp Duty cycle: adjustable Data storage and management: Internal memory: 1 GB
Capacity: storage of up to 1,000 screenshots, storage of up to 1,000 waveforms USB export support: Yes Waveform manager: Support for viewing, zooming, deleting and analysing stored signals.

Additional functions: Automatic settings (AUTO): single button for quick parameter adjustment Lissajous graph display: comparison of amplitude, frequency and phase of two signals FFT analysis: clear analysis of signal harmonic components
High-voltage protection: ensures safe measurement up to 400 V when using the 10X probe
Roll mode: support for continuous real-time measurement Dimensions: 310 × 145 × 70 mm Weight: approx. 1.5 kg