Loading...
Photovoltaic solar panel 12V/60W SZ-60-MC 600x600x2mm monocrystalline flexible
New
Flexibilní monokrystalický solární panel - výkon 60W, systémové napětí 12V, Voc=22,44V, Isc=3,33A, Vmp=19,14V, povrch CPC s vysokou propustností světla a odolností vůči povětrnostním vlivům, plně vodotěsná konstrukce, kabely 90 cm s konektory MC4, pracovní teplota -40 až +85°C, kompatibilní s regulátory MPPT, vhodný pro lodě a karavany
Last piece
Expected shipping:
15.06.2026
Regular price
1.150,00 Kč
950,41 Kč
excl. VAT
Unit price
/
Unavailable
SOLARFAM | SKU:
04280516
Photovoltaic solar panel 12V/60W SZ-60-MC 600x600x2mm monocrystalli...
Regular price
1.150,00 Kč
950,41 Kč
excl. VAT
Unit price
/
Unavailable
Product description
Solarfam photovoltaic panel is made of monocrystalline silicon. It is lightweight and semi-flexible and is primarily designed for mounting on slightly curved surfaces, e.g. on boats or caravans. It is fitted with 90cm long cables with MC4 terminals. It is designed for system voltage 12V and with regard to the Vmp parameter for MPPT controllers.
Fully waterproof panel construction.
CPC
The CPC material used on the surface has good weather resistance and high light transmittance and its performance is better than ETFE material. The integration of composite material has better solar cell protection compared to traditional flexible panels. The panels are very lightweight, easy to carry and install.
Technical parameters:
Max. no-load voltage Voc=22,44V
Max.short circuit current Isc=3,33A
Max.voltage at 80W output: Vmp=19,14V
Max.current at 80W: Imp=3,14A
Operating temperature: -40°C to +80°C
Number of cells: 33
Max. system voltage: 200V
Cable length: 90cm/2.5mm2
MC4
Dimensions: 600x600x2mm
Weight: 1.45kg
Protection: IP67
CE, RoHS
Monocrystalline cell description
To produce a single crystal cell, a uniform quartz crystal ingot needs to be produced. Such production is quite demanding. The round ingot is cut into so-called wafers, which are trimmed to the required PV cell size. Because the ingot is formed as one large silicon crystal, its structure is uniform and very clean.
Advantages of single crystal
Higher cell efficiency and therefore higher power yield from the same area
Slightly slower "aging" of the silicon, i.e. panel performance declines more slowly with time
Cell coloration is homogeneous, panels are not "speckled"
Installation
When bonding a flexible panel to the roof of a vehicle, caravan, etc., it is necessary to take into account the different expansions of the roof and panel material, which can cause damage to the flexible panel.
We recommend gluing the flexible panels to an intermediate layer of "Makrolon Plaxiglas", which also allows air to flow under the solar panel, thus increasing its efficiency.Note: the flexible panel can only be bent on the longer side and at a maximum angle of 20°.
Fully waterproof panel construction.
CPC
The CPC material used on the surface has good weather resistance and high light transmittance and its performance is better than ETFE material. The integration of composite material has better solar cell protection compared to traditional flexible panels. The panels are very lightweight, easy to carry and install.
Technical parameters:
Max. no-load voltage Voc=22,44V
Max.short circuit current Isc=3,33A
Max.voltage at 80W output: Vmp=19,14V
Max.current at 80W: Imp=3,14A
Operating temperature: -40°C to +80°C
Number of cells: 33
Max. system voltage: 200V
Cable length: 90cm/2.5mm2
MC4
Dimensions: 600x600x2mm
Weight: 1.45kg
Protection: IP67
CE, RoHS
Monocrystalline cell description
To produce a single crystal cell, a uniform quartz crystal ingot needs to be produced. Such production is quite demanding. The round ingot is cut into so-called wafers, which are trimmed to the required PV cell size. Because the ingot is formed as one large silicon crystal, its structure is uniform and very clean.
Advantages of single crystal
Higher cell efficiency and therefore higher power yield from the same area
Slightly slower "aging" of the silicon, i.e. panel performance declines more slowly with time
Cell coloration is homogeneous, panels are not "speckled"
Installation
When bonding a flexible panel to the roof of a vehicle, caravan, etc., it is necessary to take into account the different expansions of the roof and panel material, which can cause damage to the flexible panel.
We recommend gluing the flexible panels to an intermediate layer of "Makrolon Plaxiglas", which also allows air to flow under the solar panel, thus increasing its efficiency.Note: the flexible panel can only be bent on the longer side and at a maximum angle of 20°.
