Irrigation clock RAINPOINT ITV305

The RainPoint ITV305 three-zone controller allows you to independently manage up to three independent irrigation zones. Each of them can have a separate schedule - start time, duration and frequency of irrigation. The device is equipped with a large LCD display (liquid crystal display) and a functional selector with a zone switch for easy everyday control. A built-in metal filter, a thicker inlet thread and an IP65 (International Protection Rating - degree of protection against dust and water jets) protection ensure weather resistance. Additional functions such as manual watering, cycle delay in case of rain and protection against low battery increase the reliability of the device.

Three independent zones
Each of the three zones can be programmed independently. There are separate settings for start time, cycle length (from 1 minute to 4 hours) and frequency (every 1-12 hours or 1-7 days). This allows you to adapt the irrigation to different areas, such as lawn, flower beds and vegetables.

Manual and automatic irrigation
Manual mode allows you to start irrigation outside the schedule from 1 minute to 8 hours. Changes do not affect the preset cycles. This is a convenient solution for seasonal work or ad hoc irrigation needs.

Rain delay function
The built-in option to postpone the irrigation cycle by 24, 48 or 72 hours allows you to adapt the system operation to weather conditions and reduce water consumption in case of rainfall.

Battery discharge protection
The control unit informs about the need to replace the battery and automatically closes the valve when the energy level drops too low. The solution used protects the system from uncontrolled water drainage.

Intuitive control
A large dial and an easy-to-read LCD display make it easy to configure schedules. Buttons allow you to quickly switch between zones and change settings. A choice of time format (12H/24H) is available, and all changes are visible in real time.

Durability and resistance
The housing is dust and water resistant to IP65. The 3/4" or 1" BSP (British Standard Pipe) threads are suitable for common garden taps and a mesh filter at the inlet protects the valve from dirt. The thicker and raised plastic flange increases the connection's resistance.

Technical parameters:

Water inlet: BSP for 3/4" or 1" faucet
Operating temperature range: 3 °C - 50 °C
Working pressure: 0.5-8 bar
Time format: 12H / 24H
Watering delay: 24 / 48 / 72 hours
Watering frequency: 1 hour - 12 hours, 1 day - 7 days
Watering duration: 1 minute - 4 hours
Manual watering duration: 1 minute - 8 hours
Power supply: 4 x AA batteries (not included)
Waterproof level: IP65

Package contents:

3-zone irrigation controller
Sealing tape
Replacement rubber seal
Mounting nut
Instruction manual