Pliers for leveling clips SIXTOL LEVEL SYSTEM PRESS

Quality leveling pliers LEVEL SYSTEM PRESS for leveling tiles and tiling. Leveling the paving is very simple with the LEVEL SYSTEM PRESS pliers - you insert clips into the joints according to the width of the joint, insert a wedge into the clip and use special leveling pliers to level the paving or tiling into one plane. As soon as the glue under the tile hardens, use a rubber mallet to hit the clips, close the joints and you're done.

- Easy, fast and precise laying of tiles and paving stones
- Removes unevenness in height between tiles and tiles, so-called lippage
- Suitable for tiles and tiling of all materials and shapes

Use:
1. During laying, insert clips of a width according to the required joint width into the joints between tiles or tiles.
2. Insert wedges into all clips.
3. Using leveling pliers, pull the first wedge into the clip until the tiles are level.
4. According to the first wedge, screw the fixing screw on the pliers to pull the rest of the tiles or tiles with the same force.
5. Tighten the rest of the wedges.
6. After the glue has hardened (usually after 24 hours), remove the clips by hitting the rubber mallets from the side in the direction of the joint.
Note: The wedges can be used repeatedly.
Note: The joint must be clean to properly remove the clips with a mallet.

Technical parameters:

- Pliers length: 235 mm
- Max. opening of the pliers: 70 mm
- Material: PP handle + galvanized steel

Package contents:
- 1 x Pliers for leveling clips