Chemical anchor DEBBEX SF VINYLESTER 380ml Peeler Systém

Professional two-component chemical system for fast and strong anchoring. Ideal if you need to attach heavy elements indoors or outdoors, with the certainty of fast and high-quality work.

Type: peeler system
Packaging type: cartridge
Color: gray

Where is it suitable?
for indoors and outdoors
anchoring to concrete, masonry, bricks, stone, etc.
for attaching wooden or steel structures or facade elements
anchoring sports equipment, scaffolding, railing bases, posts, fences, cable trays, handrails, awnings, gates or stairs in swimming pools or traffic signs

What to watch out for?
the hole must be thoroughly cleaned before application
proper mixing of both components (gray color)
use a mechanical or electric application gun for extrusion

How to anchor?
first drill a hole of the required dimensions
clean the hole properly using a brush and a pump
use the application gun to push the first approx. 10 cm out of the hole until the anchor is grey
then apply the material directly into the hole
insert the threaded rod or other elements with a rotating motion

What makes it stand out?
extreme strength of the anchored joint
can also be applied to flooded boreholes
quickly sets
reduced odor
resistant to chemicals

Characteristics
extreme load
highly resistant to bending and pressure
interior and exterior
immediately usable, easy to apply, odorless
application temperature from -10 °C to +40 °C (also applies to the substrate)
also to flooded holes (without frost)
very good mechanical, thermal (up to +120 °C) and chemical resistance
for threaded rods M8 to M30
for reinforcing steel ?8 to ?32
high strength of anchored materials without expansion pressures
ETA certification

Hazard identification

Component A:
Signal word: WARNING

H317 May cause an allergic skin reaction.
H335 May cause respiratory tract irritation.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P362+P364 Take off contaminated clothing and wash before reuse.
P501 Dispose of contents/container to hazardous or special waste collection point.

Component B:
Signal word: WARNING

H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P261 Avoid breathing vapors.
P280 Wear protective gloves and eye/face protection.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/attention.
P362+P364 Take off contaminated clothing and wash before reuse.
P501 Dispose of contents/container to hazardous waste collection point.