Chemical anchor DEBBEX VINYLESTER ECO 300ml

Professional two-component chemical system based on vinyl ester resins for fast and strong anchoring. Styrene free. It can also be used in interiors and exteriors with a high application temperature of up to +40 ° C. It allows anchoring in all types of substrates, such as concrete, masonry, hollow bricks, natural stone, blocks, and lightweight concrete. Suitable for extreme loads and fastening of wooden or steel structures, threaded rods, facade elements, sports facilities, scaffolding, railing feet, posts, fences, cable trays, handrails, awnings, gates, etc.

Where does it fit?

to the interior and exterior
anchoring in concrete, masonry, bricks, stone, etc.
for fixing wooden or steel structures or facade elements
anchoring of sports equipment, scaffolding, footings of railings, posts, fences, cable trays, handrails, awnings, gates, etc.

What to watch out for?
the hole must be thoroughly cleaned before application
proper mixing of both components (gray color)
use a mechanical or electrical application gun for extrusion

How to anchor?
first drill a hole of the required dimensions
clean the hole properly with a brush and pump
using an application gun, push the first approx. 10 cm out of the hole until the anchor is gray
then we apply the material directly to the hole
we insert the threaded rod or other elements by rotating

What makes it stand out?
extreme strength of the anchored joint
can also be applied to flooded wells
solidifies quickly
reduced odor, does not contain styrene
anchoring of threaded rods M8 - M24
- 300ml