1
of
3
Loading...
Hybrid voltage converter CARSPA CARSPA NMS-1500-24 DC/AC 24V/1500W MPPT regulated
New
Wholesale price
Hybridní měnič napětí pro solární panely - vstupní napětí 24V DC, výkon 1500W, čistá sinusovka, integrovaný MPPT solární regulátor, funkce UPS se zálohováním ze sítě nebo generátoru, nastavitelná priorita zdrojů, jednofázový ostrovní výstup, LCD displej, integrovaný jistič, ochrany proti přehřátí, přebíjení a nadměrnému vybití, kompatibilní s AGM i GEL bateriemi, volitelné pracovní režimy
In stock 2 pcs
Expected shipping:
31.07.2026
Regular price
4.090,00 Kč
3.380,17 Kč
excl. VAT
Unit price
/
Unavailable
CARSPA | SKU:
04230714
Hybrid voltage converter CARSPA CARSPA NMS-1500-24 DC/AC 24V/1500W ...
Regular price
4.090,00 Kč
3.380,17 Kč
excl. VAT
Unit price
/
Unavailable
Product description
The device is a combination of a pure sine wave inverter, UPS and MPPT controller for solar panels. It is therefore a backup power supply with backup from the public grid or generator, battery charger and MPPT solar controller, while the priority of backup can be set inversely, i.e. priority of the public grid and backup from batteries or PV panels.
- pure sine wave, suitable for all appliances
- MPPT solar controller for maximum yield
- single-phase islanded output without overflows (cannot be connected in parallel to DS)
- clear and adjustable LCD display
- selectable operating modes and priority of power supplies
- adjustable operating parameters as required
- integrated short circuit / overload circuit breaker
- protection against overheating, overcharging and excessive battery discharge
- AGM and GEL batteries or LiFePO4 batteries can be used (for experienced users only)
- battery can be automatically recharged from the mains if solar power is not available
- audible warning of faulty status and malfunction
- cold start and power saving mode function
- powerful active cooling
Specifications:
Mains input voltage: 230V AC ±10% 50Hz
Output: 1 phase, 230V AC +- 5%
Rated inverter power: 1500W / 1500VA
Peak power: 3000VA for 3 sec.
Switching delay: 10ms (for PC) - 20ms (for home appliances)
Output waveform: pure sine wave
Battery voltage: 24V
Maintaining voltage: 27 V
Battery protection: <32 V
Battery type: AGM, GEL, LiFePO4 (optional, must be set)
Max. mains charging current: 40 A
Max. current of MPPT controller: 40 A
Max. panel power: 1080 W
Max. solar panel voltage (Voc): 150 V DC
MPPT controller operating voltage range: 30 - 150 V
Inverter power priority: solar/UPS/network-backed battery only
Charging priority: solar / grid / solar + grid / solar only
Self-consumption: 2 W
Efficiency: 98% (MPPT), 94% (inverter)
Dimensions: 286 x 240 x 91 mm
Operating temperature: 0 to 55°C
Weight: 3.5 kg
Degree of protection: IP20
Notes:
230VAC output voltage is only available at the output terminal block. The AC OUT socket on the side of the unit is not connected as it does not comply with our standards.
This product requires professional installation.
- pure sine wave, suitable for all appliances
- MPPT solar controller for maximum yield
- single-phase islanded output without overflows (cannot be connected in parallel to DS)
- clear and adjustable LCD display
- selectable operating modes and priority of power supplies
- adjustable operating parameters as required
- integrated short circuit / overload circuit breaker
- protection against overheating, overcharging and excessive battery discharge
- AGM and GEL batteries or LiFePO4 batteries can be used (for experienced users only)
- battery can be automatically recharged from the mains if solar power is not available
- audible warning of faulty status and malfunction
- cold start and power saving mode function
- powerful active cooling
Specifications:
Mains input voltage: 230V AC ±10% 50Hz
Output: 1 phase, 230V AC +- 5%
Rated inverter power: 1500W / 1500VA
Peak power: 3000VA for 3 sec.
Switching delay: 10ms (for PC) - 20ms (for home appliances)
Output waveform: pure sine wave
Battery voltage: 24V
Maintaining voltage: 27 V
Battery protection: <32 V
Battery type: AGM, GEL, LiFePO4 (optional, must be set)
Max. mains charging current: 40 A
Max. current of MPPT controller: 40 A
Max. panel power: 1080 W
Max. solar panel voltage (Voc): 150 V DC
MPPT controller operating voltage range: 30 - 150 V
Inverter power priority: solar/UPS/network-backed battery only
Charging priority: solar / grid / solar + grid / solar only
Self-consumption: 2 W
Efficiency: 98% (MPPT), 94% (inverter)
Dimensions: 286 x 240 x 91 mm
Operating temperature: 0 to 55°C
Weight: 3.5 kg
Degree of protection: IP20
Notes:
230VAC output voltage is only available at the output terminal block. The AC OUT socket on the side of the unit is not connected as it does not comply with our standards.
This product requires professional installation.
