Loading...
Foam PENOSIL GoldGun 65 low-expansion cream 750ml
Nízkoexpanzní pistolová polyuretanová pěna - objem 750 ml, aerosolová nádobka 870 ml, barva krémová, rozměrová stabilita bez smrštění, dokonalá vzduchotěsnost, tepelná a akustická izolace, přilnavost k dřevu, betonu, kameni, sádře, kovu, PVC a polystyrenu, aplikační teplota +5 až +30°C, vhodná pro těsnění spár oken a dveří a vyplňování mezer
Last piece
Expected shipping:
15.06.2026
Regular price
215,00 Kč
177,69 Kč
excl. VAT
Unit price
/
Unavailable
PENOSIL | SKU:
06560943
Foam PENOSIL GoldGun 65 low-expansion cream 750ml
Regular price
215,00 Kč
177,69 Kč
excl. VAT
Unit price
/
Unavailable
Product description
PENOSIL PU foam low expansion 65 is a highly effective, professional gun foam for insulating and sealing joints, gaps, openings and penetrations of windows and doors.
Ensures tight and soundproof sealing.
Very high efficiency: 49% more foam.
Excellent dimensional stability (no shrinkage).
Strong and solid construction.
Prevents thermal bridges.
Perfect airtightness.
High thermal and acoustic insulation.
COLOR
Cream.
PACKAGING
Aerosol can 870 ml
USE
Sealing and filling of window and door joints.
Sealing and filling of holes and gaps.
Penetration insulation.
Sealing of connecting joints.
Improved thermal and acoustic insulation.
Reduction of thermal bridges.
Adheres to: wood, concrete, stone, plaster, metal, PVC and polystyrene.
APPLICATION PROCEDURE
Surfaces must be clean and free of dust, loose particles and oil stains.
For faster curing and better final results, spray dry surfaces with water (only at temperatures above freezing).
Shake the can thoroughly at least 20 times.
Hold the can vertically with the valve upwards.
Screw the can onto the gun.
Hold the can upside down when squeezing the foam.
The foam output can be adjusted using the gun trigger and adjusting screw.
Fill the joints to approximately 65%. For larger joints, apply the foam in several layers, slightly moistening it between layers.
Excess foam can be removed after complete curing.
Do not point the gun at people. Do not tighten the can onto the gun with the valve inverted. Do not tighten the gun on the can. Do not bend or twist the can while tightening.
LIMITATIONS
Does not adhere to polyethylene (PE), PTFE (Teflon®) or silicone surfaces.
Do not use at temperatures below 0°C.
Cured foam should be covered with a suitable material with UV protection.
Do not cover until the foam is completely cured.
SURFACE PREPARATION
Air temperature during use: 0°C to +35°C.
Protect adjacent surfaces with paper, plastic film or other suitable material.
Due to the variety of building materials, we recommend a preliminary compatibility test.
When working at low temperatures, the foam can should be warmed to room temperature (approximately 20°C).
Use Penosil 929 foam cleaner to clean tools and surfaces from uncured foam.
Penosil 995 foam remover softens hardened foam and makes it easier to remove.
CLEANING
Use Penosil 929 foam remover to clean tools and surfaces from uncured foam.
Penosil 995 foam remover softens hardened foam and makes it easier to remove.
STORAGE
Guaranteed shelf life is 18 months from date of production, provided it is stored in its original, unopened packaging in a cool, dry place at a temperature between +5°C and +30°C.
Do not expose to temperatures above +50°C, do not store near heat sources and in direct sunlight.
Store and transport in an upright position.
SAFETY REQUIREMENTS
Pressurized container. Use only in well-ventilated areas. Wear personal protective equipment if necessary. Keep out of reach of children. For more detailed safety information, please refer to the label and the safety data sheet (SDS).
Ensures tight and soundproof sealing.
Very high efficiency: 49% more foam.
Excellent dimensional stability (no shrinkage).
Strong and solid construction.
Prevents thermal bridges.
Perfect airtightness.
High thermal and acoustic insulation.
COLOR
Cream.
PACKAGING
Aerosol can 870 ml
USE
Sealing and filling of window and door joints.
Sealing and filling of holes and gaps.
Penetration insulation.
Sealing of connecting joints.
Improved thermal and acoustic insulation.
Reduction of thermal bridges.
Adheres to: wood, concrete, stone, plaster, metal, PVC and polystyrene.
APPLICATION PROCEDURE
Surfaces must be clean and free of dust, loose particles and oil stains.
For faster curing and better final results, spray dry surfaces with water (only at temperatures above freezing).
Shake the can thoroughly at least 20 times.
Hold the can vertically with the valve upwards.
Screw the can onto the gun.
Hold the can upside down when squeezing the foam.
The foam output can be adjusted using the gun trigger and adjusting screw.
Fill the joints to approximately 65%. For larger joints, apply the foam in several layers, slightly moistening it between layers.
Excess foam can be removed after complete curing.
Do not point the gun at people. Do not tighten the can onto the gun with the valve inverted. Do not tighten the gun on the can. Do not bend or twist the can while tightening.
LIMITATIONS
Does not adhere to polyethylene (PE), PTFE (Teflon®) or silicone surfaces.
Do not use at temperatures below 0°C.
Cured foam should be covered with a suitable material with UV protection.
Do not cover until the foam is completely cured.
SURFACE PREPARATION
Air temperature during use: 0°C to +35°C.
Protect adjacent surfaces with paper, plastic film or other suitable material.
Due to the variety of building materials, we recommend a preliminary compatibility test.
When working at low temperatures, the foam can should be warmed to room temperature (approximately 20°C).
Use Penosil 929 foam cleaner to clean tools and surfaces from uncured foam.
Penosil 995 foam remover softens hardened foam and makes it easier to remove.
CLEANING
Use Penosil 929 foam remover to clean tools and surfaces from uncured foam.
Penosil 995 foam remover softens hardened foam and makes it easier to remove.
STORAGE
Guaranteed shelf life is 18 months from date of production, provided it is stored in its original, unopened packaging in a cool, dry place at a temperature between +5°C and +30°C.
Do not expose to temperatures above +50°C, do not store near heat sources and in direct sunlight.
Store and transport in an upright position.
SAFETY REQUIREMENTS
Pressurized container. Use only in well-ventilated areas. Wear personal protective equipment if necessary. Keep out of reach of children. For more detailed safety information, please refer to the label and the safety data sheet (SDS).
