Flowmeter RAINPOINT ICS018

RainPoint Digital Flow Meter
The RainPoint digital flow meter combines the highest accuracy with a robust waterproof construction, offers four measurement modes (flow, last consumption, two total counts) and operates on a single CR2032 battery with a clear display indicating the charge status. Intuitive controls allow you to rotate the display and switch between units, as well as reset the data by holding down a single button. Automatic display shutdown after a minute of inactivity and the ability to measure flow in both directions contribute to comfortable use. RainPoint is ideal for the garden, motorhome, irrigation system or pool.

Accuracy and reliability in every detail
The RainPoint digital flow meter is equipped with an advanced Hall sensor and a special IC (Integrated Circuit) chipset, which guarantees measurement accuracy of ±3%. Thanks to this, you will receive reliable data on current water consumption regardless of the conditions and type of installation. No flow direction restrictions and the ability to freely change the screen orientation are features that elevate this meter above standard competitor products.

Full protection against moisture
RainPoint pays attention not only to accuracy, but also to durability. The waterproof battery compartment with a water-tight seal and silicone ring guarantees a long service life of the device and resistance to outdoor conditions (protection class IPX6). Rain, splashes of water or accidental immersion are no obstacle for it.

Full control over the measurement
The device offers four independent reading modes: current flow, last consumption (last) and two total counters (total 1 and total 2). Thanks to its extensive functions, you can monitor short-term and long-term data, compare consumption over different periods and plan savings. Want to start a new set of measurements? No problem! Just hold down the menu button and all values will be reset. In addition, RainPoint does not dictate the direction of flow - you can consider both the water inlet and outlet as inputs and change the reading direction if necessary by holding down a single button.

Battery Powered
RainPoint is powered by a single CR2032 battery - replacing it when needed only takes a few seconds. When the battery level drops, a clear warning symbol appears on the display to remind you to replace the battery. If the meter is not used for more than a minute, its screen automatically turns off to protect the battery. This keeps the RainPoint meter functional for longer, even under heavy use.

Ergonomics and intuitive operation
The LCD (liquid crystal display) display can be rotated with a short press of a button, so you can always read the data easily regardless of the mounting method. On the flow measurement side, you can change the units from GAL/min to L/min and from GAL to L by holding down the menu button, making the device universal for different measurement systems.

Technical parameters:

Waterproof: IP54
Reading modes. Current flow, last consumption, two total counters (total 1 and total 2)
Operating pressure: 0.5-10 bar (7.25-145 psi)
Measuring range: 0-9999 L
Water flow range: 0.5~45.5 l/min
Power supply: Battery powered (one CR2032 battery)
Operating temperature: 5?-40?
Display: LCD