1
of
5
Loading...
PWM solar controller EPever 20A 12/24V LS series
PWM solární regulátor - nabíjecí proud 20A, napětí 12/24V, technologie PWM, max. výkon panelu 300Wp při 12V / 600Wp při 24V, kompatibilní s panely 36 článků (12V) nebo 72 článků (24V), nastavení parametrů přes externí displej MT50, ochrana proti přepólování a přebití, určeno pro malé ostrovní solární systémy
Last piece
Expected shipping:
15.06.2026
Regular price
799,00 Kč
660,33 Kč
excl. VAT
Unit price
/
Unavailable
EPEVER | SKU:
04280419
PWM solar controller EPever 20A 12/24V LS series
Regular price
799,00 Kč
660,33 Kč
excl. VAT
Unit price
/
Unavailable
Product description
High-quality solar PWM controller 20A 12V/24V. Suitable only for panels with a power of approximately 300Wp/12V battery and 600Wp/24V battery.
PWM solar controller. Its design is intended for small island solar systems with 12V solar panels (36 cells) for charging a 12V battery, or 24V solar panels (72 cells) for charging a 24V battery and a maximum charging current of up to 20A. The advantage is very simple and easy installation and reliable operation.
We recommend operating with these solar panels from our offer:
- Victron Energy 30Wp/12V solar panel
- Victron Energy 60Wp/12V solar panel
- Victron Energy 90Wp/12V solar panel
- Victron Energy 115Wp/12V solar panel
- Victron Energy 175Wp/12V solar panel
The controller parameters are set using the external MT50 display.
You can also set parameters and monitor on your PC - you will only need an EPsolar USB communication cable and software.
Technical parameters:
- automatic detection of 12V or 24V
- three phases of battery charging.
- overvoltage protection.
- short circuit protection.
- protection against reverse polarity of the solar panels and battery connection.
- disconnects the load output at low voltage.
- optional external temperature sensor
- programmable and monitorable via external display MT-50
- RS485 MODBUS communication protocol interface
- dimensions: 159.6x81.4x47.8mm
- weight: 300g
- operating temperature: -35°C to +55°C
- maximum connection cable size: 4mm2
- designed for indoor installation, wall mounting
- for charging lead-acid batteries
- protection: IP30
PWM solar controller. Its design is intended for small island solar systems with 12V solar panels (36 cells) for charging a 12V battery, or 24V solar panels (72 cells) for charging a 24V battery and a maximum charging current of up to 20A. The advantage is very simple and easy installation and reliable operation.
We recommend operating with these solar panels from our offer:
- Victron Energy 30Wp/12V solar panel
- Victron Energy 60Wp/12V solar panel
- Victron Energy 90Wp/12V solar panel
- Victron Energy 115Wp/12V solar panel
- Victron Energy 175Wp/12V solar panel
The controller parameters are set using the external MT50 display.
You can also set parameters and monitor on your PC - you will only need an EPsolar USB communication cable and software.
Technical parameters:
- automatic detection of 12V or 24V
- three phases of battery charging.
- overvoltage protection.
- short circuit protection.
- protection against reverse polarity of the solar panels and battery connection.
- disconnects the load output at low voltage.
- optional external temperature sensor
- programmable and monitorable via external display MT-50
- RS485 MODBUS communication protocol interface
- dimensions: 159.6x81.4x47.8mm
- weight: 300g
- operating temperature: -35°C to +55°C
- maximum connection cable size: 4mm2
- designed for indoor installation, wall mounting
- for charging lead-acid batteries
- protection: IP30
