Wireless robot BUBLUE A10 PS

Pool cleaning robot Bublue A10 PS
The Bublue A10 PS is a modern pool cleaning robot designed to remove debris from the bottom and work close to the walls - without the need for manual intervention. Thanks to its high power (33 W), it effectively removes sand, leaves and small debris in a single cycle. It works cordlessly for up to 90 minutes and thanks to the fast charging, it is ready for the next cycle after only about 3 hours. The DirtLock™ Tech 2.0 system efficiently traps debris in the filter basket and intelligent wall detection makes it easy to move. In addition, the auto-parking feature allows convenient removal of the robot when the job is done. The entire device is complemented by LEDs that indicate the status of the device.

Bluehole Technology™ - efficiency visible after one cycle
The high cleaning efficiency is due to the new Bluehole Technology™, which improves the cooperation between nozzle, motor and suction impeller. This translates into up to twice the overall performance compared to previous solutions, as well as 3X better leaf collection efficiency and 8.5X greater efficiency in removing debris between 3 and 8 mm in size (compared to the previous generation). As a result, a single cleaning cycle is all it takes to restore cleanliness without the need for hand vacuuming or restarting the machine.

Intelligent sensors, autonomous parking and bright LED signals
The Bublue A10 PS Robotic Pool Cleaner has been designed with maximum user convenience in mind, so it uses advanced contact sensors that enable a fast and accurate response to the pool walls. Corner Boost™ technology increases cleaning intensity in corners and offers up to twice the cleaning efficiency for removing debris in these critical areas. When the robot hits an edge, it automatically corrects its path and moves smoothly and without chaotic bouncing, which translates into smoother and more efficient bottom cleaning. At the end of the cycle, the device parks itself against the pool wall, allowing it to be quickly and conveniently removed from the water. In addition, built-in LEDs provide real-time information on the operating status, charge level and readiness of the device.

Dual filtration and DirtLock™
The dual filtration system combines two levels of 80 and 150 mesh mesh screens to effectively capture both larger debris such as leaves and fine sand or sediment. This solution increases average suction efficiency by up to 15% and keeps the water cleaner throughout the cycle. This is complemented by DirtLock™ technology, which allows the water to be quickly drained from the robot in approximately 5 seconds, reducing maintenance time by up to 80% and preventing almost 100% backflow of trapped debris into the pool. In addition, the optimised basket design provides up to 30% more capacity compared to standard solutions, meaning longer operation without the need for frequent emptying.

Precise component interaction - stable suction performance throughout the entire operating cycle
The Bublue A10 PS features an optimised suction system in which nozzle, motor and impeller work in perfect synchronisation. This design allows a smooth flow of water and dirt throughout the system without loss of power or sudden drop in performance. The precise alignment of these components translates into stable and efficient suction of both small particles and larger debris, regardless of the degree of contamination at the bottom of the pool. The result is consistent robot operation, improved energy utilization and consistently high cleaning efficiency from start to finish.

Long operating time and fast charging - ready to clean whenever you need it
The robot is equipped with a 4400 mAh battery that provides up to 90 minutes of continuous operation, allowing you to thoroughly clean the pool bottom in a single cycle. After cleaning, the device recharges in approximately 3 hours, so it quickly returns to full readiness and doesn't require long breaks between uses. This combination of operating time and charging time makes the Bublue A10 PS the ideal choice for above-ground pools up to approximately 80 m2 with a flat bottom.

Easy maintenance - tool-free and effortless cleaning of the robot
When the job is done, simply rinse the filter and robot housing with a normal garden hose - no need to disassemble the device or use additional accessories. This form of cleaning makes it easy to remove sand, leaves and small debris.

Technical parameters:

Rated power: 33 W
Operating time: 90 minutes
Charger input voltage: 100-240 V
Charger output voltage: 12.6 V DC
Charger output current: 1.8 A
Battery capacity: 4400 mAh
Charging time: Approximately 3 hours
Supported pool area: 80 m2
Filter density: 180 µm
Weight: 3.5 kg
Cleaning depth: 3 m
Waterproof rating: IPX8

Package contents:

Pool cleaning robot
Charger
Hook to pull the robot out of the water
Handle
Brush x2
Instructions for use