Smart controller for LED strip SHELLY Plus RGBW PM WiFi

The Shelly Plus RGBW PM LED strip controller is the key to creating a unique atmosphere in your home or office. It supports 12V and 24V LED strips in White, RGB and RGBW modes, giving you complete freedom of personalization. Soft light for evening relaxation, dynamic lighting effects at a party or practical backlighting in the kitchen - all at your fingertips. Without the need to install additional hubs, you can start your smart lighting adventure right after plugging it in.

Lighting effects that delight
With the Shelly Plus RGBW PM lighting, you can add a unique touch to your interior. Create the right mood by dimming the light or choosing from 16 million colors. The device also offers unique lighting effects that will bring any room to life - from subtle tonal transitions to dynamic color changes.

Smart schedules and scenes
Adapt your lighting to your lifestyle with smart schedules and scenes. The Shelly Plus RGBW PM controller allows you to create personalized schedules that automatically adapt the light to your daily rhythm. Combine it with other Shelly devices to create a comprehensive automation system that fully meets your needs!

Control at your fingertips
With Wi-Fi and Bluetooth support, controlling your lights becomes a breeze. To monitor energy consumption, set night mode or make changes in real time, all you need is the Shelly Smart Control app. The device works with the most popular platforms and protocols, as well as voice assistants such as Alexa and Home Assistant. You can also integrate it with your favorite automation system and enjoy full control over your lighting - no matter where you are.

Safety and reliability in one
The device monitors energy consumption and has overload protection, which increases safety and helps control costs. The built-in ESP32 processor ensures lightning-fast response to every change, so you will see every setting change immediately. Shelly Plus RGBW PM also works as a Wi-Fi repeater and BLE gateway, improving the range of your home network.

Technical parameters:

Dimensions: 42 x 37 x 12 ±0.5 mm
Weight: 17 g
Maximum tightening torque of screw terminals: 0.2 Nm
Wire cross-section: from 0.1 to 1 mm2
Length of stripped wire: 6 mm
Mounting: In a wall box
Housing material: Plastic
Cover color: Yellow
Connector color: Green
Ambient temperature: -20 °C to 40 °C
Humidity: 30% - 70%
Power supply: 12/24 VDC
Power consumption: < 1.2 W
Maximum control voltage: 24 VDC
Maximum control current: 4 A per channel (total 10 A)
PWM frequency: 22 kHz
Voltmeter: 0-24 V
Voltmeter accuracy: ± 5%
Ammeter: 0-10 A
Ammeter accuracy: ± 10%
Power and energy measurement: Yes
No-load detection threshold: 0.5 VA per channel
Built-in temperature sensor: Yes
Wi-Fi range: Up to 30 m indoors, up to 50 m outdoors (depending on local conditions)
Bluetooth version: 4.2
Bluetooth range: Up to 10 m indoors, up to 30 m outdoors (depending on local conditions)
Processor: ESP-Shelly C38F
Clock frequency: 160 MHz
RAM: 400 KB
Flash memory: 4 MB
Webhooks (shared URLs): 20 (5 URLs per webhook)
Scripts: Yes
MQTT: Yes