Work lamp STU LED8cob11

Professional inspection / work / recreation LED lamp. As a light source, it has a 2 W + 1 W COB LED module. Structurally, the COB LED is made up of individual chips placed on a printed circuit board and covered with a phosphor layer, creating a homogeneous lighting surface. These modules then emit light almost continuously over the entire surface. Thanks to the mounting directly on the aluminum sheet, the modules heat up less and the service life is significantly extended. The mounting lamp has a practical design and the possibility of attachment using a strong magnet. An indisputable advantage is the absence of a cable, which in many cases is the reason for the fall and damage of ordinary fluorescent lamps.

- versatile use, from the equipment of car repair shops and service vehicles to a hand-held flashlight in households.

Technical parameters:

- light source: 2 W + 1W COB LED module
- lighting angle: 120o
- battery type: Li-Pol 3.7 V 800 mAh
- charging input USB-C 5 V/1 A
- includes a USB-C charging cable
- magnet + clip for attaching the lamp
- charging time: approx. 2 h
- charge indicator
- protection against overcharging / excessive discharge of the battery
- lighting time: 1.5 h high beam, 3 h lower beam, 3 h front light
- working temperature: -20 - +40 °C
- protection class: IP20
- impact protection class IK07
- size: 140 x 20 x 16.5 mm
- material: aluminum