Backup power supply GETI GEP501LF sine 500W wall mounted + battery 100Ah

A GETI (Emergency Power Supply) system is a device that provides a source of AC power in the event of a power grid failure. You can use the emergency power system as a backup source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and more. In normal mode, the connected equipment is powered directly from the mains and in the event of an outage, the emergency power system automatically switches to inverter mode. The connected device is then powered by the connected battery. In the event that the power supply is not restored, the emergency power system can be switched off when the voltage of the connected battery drops to around 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS features a clear colour display, a pure sine wave voltage converter based on a toroidal transformer and a fast 32-bit processor.

Note: The installation of the assembly must always be carried out only by a suitably qualified person! The contacts of the connected battery must be suitably protected against: contact with persons, foreign bodies, contact with other parts of the system or short circuit.

Product description:

- Inverter, UPS, AVR and charger in one unit
- clear colour display
- high efficiency thanks to toroidal transformer design
- high charging current
- Overload, short circuit, overload and overvoltage protection.


Technical parameters:

- Type of backup batteries: LiFePO4, AGM, GEL (not included)
- voltage of backup batteries: 12V DC
- rated capacity: 800VA
- rated power: 500W
- Design: wall-mounted
- transformer: toroid
- input voltage: 230 V AC - 50Hz
- output voltage: 230V AC ± 3% - 50Hz / pure sine wave
- charging current: 3A / 5A / 10A / 15A optional
- Charging voltage: 13.9V-14.5V / 13.3V-13.9V (maintenance)
- Low battery voltage limit: 10.5V-11.5V ( for lead)/ 10.9V-11.5V( for LifePO4)
- Low battery disconnect protection: 9.8V-11V ( for lead)/10.6V-11V( for LifePO4)
- Response time: < 4 ms
- cooling: yes
- Operating temperature: 0 ~ 40°C
- Relative humidity: 10%~90%
- Storage temperature: -15°~45°C
- Battery cable length: 2 x 75cm, M8
- Dimension: 210x253x102 mm

Gel type lead acid battery Geti is especially suitable for solar and wind power systems and caravans, but also as a battery replacement for UPS backup systems, backup power supplies, EZS, EPS applications, telecommunications, mobile warning and signalling devices, etc. It is a maintenance-free, sealed battery, which allows any working position.


Technical parameters:

- VRLA (valve regulated lead acid) technology.
- type: GEL
- voltage: 12 V
- capacity: 100 Ah
- dimensions: 328 x 172 x 217 mm
- overall height (with terminals): 220 mm
- weight: approx. 29.5 kg
- internal resistance (fully charged battery): 5 m?
- self-discharge process < 3%, 25°C



Packing: 1pcs of GETI GEP501LF backup power supply + 100AH lead acid battery
Carton weight: 35kg